Urgency: Do you want to make waterproof wall for bathroom wall tiles

To must, when the rough house comes down, the real estate developer is waterproof, but their hydropower location is not in line with their own home, generally have to carry out hydropower transformation, in the hydropower transformation of the original waterproof layer destroyed, the bathroom water consumption, the environment is humid, so the waterproof division must do, the general shower place to do 1800mm, others to do 600mm from the ground, on it.

It's better to make a waterproof one.

Of course, if you think about it, toilets and scrubbers are places where we use a lot of water, and the water splashed when taking a bath, as well as water vapor, if there is no waterproof material, it will destroy the walls over time.

Normatively speaking, it must be done. The shower place should be 1800mm, and the rest should be 600mm from the ground.

Absolutely. own home. Be loved.

Of course you have to do it, otherwise it will seep water. Especially 12 walls.

It must be done, the tile is not waterproof, the developer has done it when handing over the house, but the water and electricity must be re-waterproofed as soon as it is renovated, and the height must be at least 1800

I just saw that there is a personal bathroom waterproofing is not done, the wallpaper of the wall of the room is moldy and hundreds of dollars more, and it will cost hundreds of dollars to damage one square meter of wallpaper, and you have to knock on the tiles to redo the waterproofing Don't say spend money, annoying you, looking for a worker He may not be able to help you deal with it immediately.

Waterproofing measures have been taken, can the bathroom be without tiles? Bathroom waterproofing workflow, the ground is leveled with cement mortar, and then waterproofed after drying. Owners who require a waterproof finish that can be tiled immediately, first of all, make it clear that waterproofing just don't do it anymore.

Generally, waterproof construction should be done 2 to 3 times, and the waterproof sequence should also be paid attention to, such as completing the wall waterproofing first, and then pasting the wall tiles, and then you can do the ground waterproofing, and then paste the floor tiles. Because the ground often walks step by step, the ground waterproofing is easy to step on if it is done first.

The waterproof problem of the bathroom can be more than once, such an important link, we must do a good job! So many owners have questions, if the bathroom is not tiled, only use waterproof paint, is the effect the same? Today, Xiaoyu will go home to answer your questions, solve your questions, and then look down!

This is absolutely unreliable in terms of overall effectiveness. Because waterproof coatings are only waterproof compared to non-waterproof coatings, they are definitely not afraid of water immersion. If it is used on the bathroom wall, it is likely to crack and fall off in less than half a year if it is soaked in a humid environment for a long time.

Even if it doesn't fall off for a while, its color will be very discolored, which will affect the appearance. And the paint film is far less smooth and tidy than the ceramic tile. Even in the dry area of the restroom with dry and wet partitions, it is difficult to resist the erosion of a humid environment.

From the point of view, the waterproof coating seems to be much cheaper than the ceramic tile, but in fact many tiles are also cheap, from the cost-benefit ratio, it can meet the need for cost savings, hoping to stay in a carefree family. But nothing is absolute, the curing period has arrived, we need to test whether the waterproofing is good, whether it is leaking, which requires a water storage test.

The water storage depth of the water storage test should not be less than 20mm, the water storage height is generally 30-100mm, the water storage time is 24 hours, and the water surface has no obvious drop is qualified. This test is usually done on rooftops, bathrooms, or rooms with waterproof requirements. The water storage test should be checked downstairs every 1 hour in the early stage and downstairs every 2-3 hours in the later stage.

If water leakage is found, the water storage test should be stopped immediately, and the waterproof layer should be re-improved, and the water storage test should be carried out after the treatment is qualified.

The bathroom can not be without tiles, if not tiled, it is easy for the walls to be soaked with water, easy to rot and crack.

Definitely not, if you don't stick tiles in life, then there will be great safety hazards, and there may even be very serious water leakage. This behavior is incorrect.

If there is a dry and wet separation in the bathroom, and waterproof measures have been taken, you can not stick tiles, but the wall must be brushed with waterproof glue.

Tiles can be glued using the back of the tile. Before pasting the wall tiles, brush the "wall solid" twice on the waterproof layer, the wall fixing glue, good wettability, high bonding strength, mainly used for better pasting the tile with the waterproof layer, effectively preventing the hollow drum from falling off.

From the above steps, it can be seen that the wall of the bathroom should not only be waterproof, but also tiled, so that the waterproof work of the bathroom can be foolproof. Even fall off. If the wall has been waterproofed, if the brick is pasted, it is necessary to brush a good layer of back glue on the wall, and the back of the brick should also be brushed with a layer of back glue, which will be more firm and not easy to fall off.

The waterproof layer is used to prevent waterproofing, as long as there is a little crevice, water can drill into it, so we must protect the waterproof layer well. It is necessary to plaster, mortar and sweep on top of the waterproof layer, and use it for protection. Polyurethane waterproof material try not to be used on the wall will affect the later tile adhesion effect, the world's waterproof materials are tens of thousands, in order to avoid unnecessary trouble, give some personal advice, I hope it will be useful to you.

That is, after the hair is solidified, we use our hands to deduct the hair to see if there is a place to deduct it, if it can't be deducted, it means that the strength has arrived, there is no problem, otherwise it is unqualified. It is to use a special tile adhesive, which is selected according to the water absorption rate of the tile to paste the wall tiles. Tiles have a good heat absorption effect, and if the space temperature is high, it can effectively reduce the indoor temperature.

Of course, which one to choose depends on the specific characteristics of the house and regional differences, and you can't rush it.

It is the area of the shower room that we all know. The second part is the washbasin area in the bathroom. These two parts are required by the code to be waterproofed on the wall.

In addition, some friends have chosen the method of waterproofing all the interior walls of the bathroom, of course, it is also possible. After the waterproof layer is done 2 to 3 times, there will be a curing period of 5 to 7 days, so naturally, tiling must be done after this, so you can't stick tiles immediately after waterproofing. The bathroom wall is waterproof, and it can be tiled.

The key problem of tile sticking is not to operate according to the requirements of tiling.

Of course, it is needed, and tiling is also to make the walls of the bathroom look better, and it can also play a role in water insulation again.

OK. But before we apply tiles, we must use tile adhesive, which will be firmer and will not fall off.

Of course, you can paste tiles, but before pasting, you must level it, you must treat the wall, and you can also add barbed wire, which can make the tiles more firmly pasted and not easy to fall.

Yes, and the bathroom wall tiles are also conducive to cleaning, and it is also a decoration method that many young people will choose.

If the bathroom wall has been coated with sun protection measures, then it is possible to leave the tile untiled, but this will look very unsightly.

OK. Since the waterproofing measures have been made, it is also good not to lay tiles, and there will be no problems with using them.

Of course not, because long-term moisture erosion will damage these coatings, and it is not as good as adding a layer of tiles on the outside, which can make the service life longer.

Of course you can, as long as you do a good job of waterproofing, then there is no problem, and it is not important whether you stick tiles or not.

The first feature is that the waterproofing of the bathroom will form a moisture-proof coating or moisture-proof crystals after the wall is completed. Because the moisture-proof coating of the wall or the existence of moisture-proof crystals, it will cause a layer of protection between the general cement slurry and the bottom layer of the original wall. Therefore, in the case of adherence to floor tiles, this kind of coating or crystallization will have a certain harm to the adhesion of raw materials.

The second feature is that the porosity of the original wall of the toilet is also closed. You should understand that in the case of applying mixed mortar to the wall to stick the floor tiles, the mixed mortar is fused with the porosity of the original wall to produce mechanical equipment embedding cooperation, which ultimately ensures that the floor tiles and the wall can be firmly glued together. However, if the porosity is closed, the adhesion will be reduced.

When I say the material of the floor tiles, I actually refer to the water absorption of the floor tiles.

Due to the size of the water absorption of the floor tiles, it is also a choice of whether the floor tiles are sticky and solid. This is also because the lower the water absorption of the floor tile, the lower the porosity of its back, the lower the porosity, and the difficulty coefficient of sticking to the firm will increase; The high water absorption floor tiles have high water absorption and high porosity, so it is relatively easy to paste them. The larger characteristics of polypropylene are that concrete is used in early waterproofing projects, and concrete is also used in the middle and late floor tile parquet; And the surface layer is not smooth, and the material is thin and can be operated casually.

Therefore, the strong and moisture-proof characteristics between polypropylene and wall tiles may be particularly reliable. Polypropylene also has an engineering construction advantage that other waterproof products do not have, that is, the bottom concrete putty, which has not completely dried up; Polypropylene may be used for waterproofing projects. The application of glazed floor tiles, used for the safety performance of cabinet wall tiles, is more than the application of glazed bricks.

Due to the high water absorption of the glazed brick itself, it can be very well integrated with the bottom layer of the wallIn addition, the glazed bricks are not heavy, which is equivalent to the potential safety hazards of the wall hollowing, plus double protection.

If it is not firm, if the wall of the bathroom is waterproofed, the tile may be not firmly pasted, and there may be a hollow drum; It should be noted that if you put tiles after waterproofing, it is likely to be affected by water vapor, and then it will cause it to fall off, and then there will be great safety hazards.

The bathroom wall is relatively firm to make waterproof tiles, but be careful not to use the method of seamless paving, so as to avoid the situation that the tiles will fall off.

It is very firm, and now many people will use this kind of tile, and it is necessary to pay attention to the waterproof tile to let a special worker to do.

The wall of the bathroom has different situations according to different divisions, and there are generally two situations: if we use the surface layer as the criterion, there will be two situations:The first situation is that the surface of the toilet wall is just plain plastered, which is called plastering wall.

In the second case, it is common to apply waterproof paint.

The wall surface of the bathroom is the area for bathing and the location of the wash basin, which is also the area where water often splashes in our lives. According to the requirements of the specification, it is necessary to brush with a waterproof coating material, so as to prevent water from seeping into the wall during use, resulting in the return of moisture on the wall, and the result is that the wall is soaked and falling off. We have to spend a lot of money to repair the walls, which brings unnecessary trouble to our lives.

You can only apply tiles after the waterproofing is done, but it is also the type of paint that needs to be paid attention to when applying tiles.

For example, the surface of the wall is coated with polyurethane waterproof material, so it is not possible to directly paste the tiles, because it cannot be pasted, so we need to add an additional process that is the brushing treatment of the wall. Brushing can be very effective in solving the direct adhesion between the bottom layer and the tile bond. Nowadays we use tile glue or mortar mixed with cement.

Such adhesive materials must be bonded to the bottom layer to make the tiles more firm. It is also possible to prevent the tiles from emptying and drumming or even falling off.

As long as the brushing strength reaches the standard, you can apply tiles. So what we have to learn is how to judge the strength of brushing, and what kind of strength can be used to paste tiles. Rather than judging by timeliness, different materials have different brushing effects, and when natural tiles are pasted is also different.

Does waterproofing affect tiling on bathroom walls?？I think it will not affect, not only will it not, but also can increase the waterproof function, the bathroom consumes a lot of water, not only to consider the decoration when decorating, but also to consider the practicality, practicality is the waterproof project, which is very important. Waterproofing work is a must, and ceramic tiles are also mostly used in bathrooms, so there will be no impact and contradiction between the two, and we can use them with confidence.

1. Choose a high-quality tile paved toilet, due to the high humidity in the bathroom, it is necessary to choose a tile that is resistant to moisture, dust and water absorption and low slip wear.

2. Make a plan before laying bricks, plan the bricks before paving, try not to appear one-third of the size, if you need to process and cut, the tile is cut more than two-thirds.

3. Clean the tiles and walls before paving, in order to avoid empty and falling phenomena, please clean the walls and bricks. Before placing tiles, it is necessary to inspect the envy walls. If there are cracks in the walls, they should be treated first.

4. When laying tiles, pay attention to leaving expansion joints, when too much heat and excessive cold, the tiles will expand, and can be tightened, which will cause the phenomenon of hollowing or falling, so leave space during construction.

Does waterproofing affect tiling on bathroom walls?？Bathroom tiles should be waterproof before they are laid. Waterproofing construction can be carried out after leveling and drying, and it must be fire-resistant and waterproof during construction.

Before waterproofing, the height should be checked correctly, especially in bathrooms with bathtubs, and attention must also be paid to the correct position of the floor drain.

6. The use of caulk, it is not ordinary color cement. It is often used on floors or the walls of sidewalks. It is characterized by strong color adhesion, pressure resistance, abrasion resistance, no alkaline, no bending grip shrinkage, no spraying, more than just replacing tiles.

The gap is prone to falling, the adhesion is not strong, and the combination of the color of the gap and the tiles looks uniform and harmonious.

The above is the bathroom wall waterproofing, the impact of tiling? It seems that not only ceramic tiles, but also many requirements for ceramic tiles, you can take a look.

You can get it for free