How is the wind deflector of the air conditioner outlet installed? 40

Before installation, we first have to check whether the parts of the wind shield we want to install are complete and whether they are missing, and to install the wind shield, we need a large wind shield panel, as well as two adhesive plates, and two connecting rods connected to the air conditioner. Secondly, we need to use the external force of the two connecting rods to press them out of a 90-degree arc at the groove, and then connect one end of the two rods with the adhesive plate part, here we must pay attention to the process of connection, to make one end of the connecting rod and the adhesive plate completely connect the ball into the connecting rod. Then our school put the wind deflector of the air conditioner flat on the ground, put the two connecting rods into the wind deflector to connect them, and the other end of the connecting rod should be connected according to the corresponding card slot, so that they can be connected accurately.

Secondly, after adjustment, tear off the paper on the sticky board, glue the board to the appropriate position, and press it tightly to prevent the wind deflector from falling, so that the wind deflector can be installed by itself.

At first glance, it is original, and when not in use, close the dust stopper.

One end is put into position first, and the other end is bent into position.

When assembling the panel assembly in the factory, the wind deflector has a certain elasticity and gets stuck in.

The air conditioner wind deflector is installed as follows: 1. First, check whether the accessories of the wind baffle are complete, including a panel, two adhesive plates, and two connecting rods. 2. Press the movable end of the connecting rod to 90 degrees from the groove, and both of them are operated in the same way.

3. Next, press the end of the connecting rod to 90 degrees and the convex spherical part of the adhesive plate until the ball enters the connecting rod. 4. Then, put the wind deflector flat on the ground, and push the other end of the connecting rod into the corresponding groove of the wind deflector by hand, and put both connecting rods into the wind deflector. The part with the adhesive plate is facing inward.

5. Next, go to the air conditioner in the room, wipe the positions to be glued on both sides of the air conditioner, and it is recommended to use a dry towel, so that you don't have to wait for the water to dry. 6. Compare the length of the air conditioner and adjust the wind deflector to the appropriate length. Peel off the stickers on the stickers and glue the two sticky boards to the right places on both sides of the air conditioner.

If the height is not enough, you can move a stool and stand on it. 7. Finally, after determining the position, press the sticky plate tightly to prevent it from falling off in the future.

Air conditioner is an indispensable household appliance in our family life, and we also know that air conditioner has many parts, among which the function of air conditioning wind deflector is also relatively powerful. In fact, the benefits of air conditioning wind deflector are very many, first of all, it avoids the air conditioning wind blowing directly on people, so as to reduce the occurrence of air conditioning disease. And the air conditioner wind shield can also prevent dust from entering the inside of the air conditioner.

1. When the wind deflector is opened, the wind is blocked. It can effectively avoid all kinds of discomfort caused by direct air conditioning, and provide a healthy and comfortable living environment for family members.

2. The baffle adopts a dense hole design, a blow is equivalent to cutting the air into 3000 times, the cool breeze blown out of Baoling is soft and delicate, there is a cool feeling of covering the scum but no wind feeling, and the baby, the elderly and pregnant women will not feel uncomfortable when sleeping.

3. The wind deflector is suitable for all kinds of hanging air conditioners, and the most important thing is that the arc design can freely adjust the direction of the baffle, so as to control the air outlet direction of the air conditioner, so as to adapt to the temperature of different seasons, maintain the most comfortable and healthy air conditioning temperature, and keep the family healthy. For example, in summer, the warm air is generally on top, at this time, the baffle is moved down, the air conditioner is adjusted to blow up, and the cold and hot circulation of the air can have a better cooling effect, which is not only power-saving but also more comfortable.

How to adjust the air conditioner wind deflector before the air outlet cleaning steps: Rotate the upwind and downwind wind guide plates at a certain angle and push the latch outward. Then grasp the two ends of the upwind and downwind wind guide plate and gently pull it to the center, and slightly break outward, and after the rotation shaft is out of position, you can remove the upwind and downwind wind guide windboard.

You can rinse the upwind and downwind windshields with water and dry them in a cool place. Use a rag to clean around the air outlet and the left and right wind deflectors. Install the wind deflector plate back in the upper and lower lead kamikaze direction, push the latch inward, and close the wind deflector.