How to deal with the leakage of the air conditioner s air outlet

The air conditioner outlet leakage is treated as follows:

Reason 1: There is a lot of dust.

The air conditioner is a thing that easily absorbs dust in the air when in use, and if you don't pay attention to its cleaning at home, it will accumulate dust on the filter screen and inside the machine. The water droplets that accumulate on the evaporator are hindered by dirt and cannot flow into the sink, which makes it easy to leak.

Solution: The most thorough solution to this situation is to do an overall cleaning of the air conditioner. In this way, the internal condensation can flow into the sink normally, and there will be no leakage.

Reason 2: The internal galvanized sheet is offset or deformed.

There is a galvanized plate inside the air conditioner that is used for diversion, if this thing is not installed in place or deviates or deforms in the future, then it will not be able to make the condensate flow smoothly to the sink, and then it will form a water leak.

Solution: Reassemble the galvanized sheet or replace it with a new one. If it is caused by the design defect of the product itself, then it is necessary to install a water baffle to solve it.

Reason 3: Refrigerant problem.

If there is not enough refrigerant inside the machine, in this case, the machine will freeze when it is started. When the ice melts when it encounters the hot air outside, it will form water, which will also cause water leakage.

Solution: If it is a newly bought machine, we should contact the after-sales service first and let them come to overhaul it. In the case of machines that have been in use for many years, the refrigerant needs to be replenished so that there are no more water leaks.

Cause 4: Installation problems.

Sometimes, if the installation of our internal machine is not up to the level, or the air conditioning hole is low inside and high outside, then the internal condensate will also overflow outward.

Solution: Adjust the horizontal position of the machine or re-perforate it so that the condensate can be discharged smoothly.

Reason 5: Drain pipe problem.

Sometimes, the drain pipe may be clogged or damaged, and the water inside will flow out of the damaged area, or it will leak if it cannot be discharged in time.

Solution: Unclog the internal water pipe or check the drain for leakage first. If the drain pipe is damaged, it should be repaired in time. And if it is a blockage, then it is necessary to dredge.

Summary. It may be caused by damage to the drain pipe, lack of fluorine in the air conditioner, improper installation of the internal unit, etc., take the damage of the drain pipe as an example, 1. Unplug the air conditioner. 2. Peel off the thick pipe wrapped with white paint tape to find the threaded drain pipe.

3. Pull out this drain pipe from the joint, then connect the new drain pipe, and then wrap a few loops of tape around the interface.

It may be due to the damage of the drainage pipe, the lack of fluorine in the air conditioner, the improper installation of the internal unit and other reasons, taking the damage of the drainage pipe as an example, 1. Unplug the air conditioner. 2. Peel off the thick pipe wrapped with white paint tape to find the threaded drain pipe. 3. Pull out this drain pipe from the joint, then connect the new drain pipe, and then wrap a few loops of tape around the interface.

I'm still a little confused, can you be more detailed?

It may be due to the damage of the drainage pipe, the lack of fluorine in the air conditioner, the improper installation of the internal unit and other reasons, taking the damage of the drainage pipe as an example, 1. Unplug the air conditioner. 2. Peel off the thick pipe wrapped with white paint tape to find the threaded drain pipe. 3. Pull out this drain pipe from the joint, then connect the new drain pipe, and then wrap a few loops of tape around the interface.