What are the reasons for Geely s long term direction to help the tubing burst?

Updated on Car 2024-07-04
27 answers
  1. Anonymous users2024-02-12

    Hello, generally it should be that the oil pipe is not connected, and then the friction causes oil leakage, it may also be the oil pipe of the auxiliary factory, the quality is not good, or there is a problem with the oil, the oil pipe is corroded, yesterday we came here with an antifreeze added to the deputy factory, and the oil pot became sesame sauce, and the pipe was also corroded [car problem, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

  2. Anonymous users2024-02-11

    Hello, it is usually caused by the aging of the oil pipe, and try not to kill the direction when driving [car questions, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

  3. Anonymous users2024-02-10

    Hello. The burst oil pipe of the booster pump may be worn out, or it may be a problem with the material itself, if it is within the warranty period, you can claim it. Hope mine is helpful to you. [Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

  4. Anonymous users2024-02-09

    Hello, the reason is that the pressure of the booster pump is too high, and there are reasons.

    There is a blockage in the return pipe of the booster pump.

    There is a blockage in the high-pressure pipe of the booster pump.

    Check it, repair it if you have a problem, I'm glad about your problem, I hope it can help you, I wish you a happy car! [Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

  5. Anonymous users2024-02-08

    Hello, it may be that the steering machine is broken, or it may be that the oil pipe is blocked, causing the oil to be blocked, and the pressure in the oil pipe is too high, I hope my can help you [car questions, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

  6. Anonymous users2024-02-07

    Hello. The bursting of the directional power tubing is normally caused by the aging of the tubing, followed by the high oil pressure and the blockage of the tubing.

    The main thing is that the oil pipe is aging, and it can be replaced. [Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

  7. Anonymous users2024-02-06

    Hello, it should help the oil to be dirty, caused by the high pressure of the oil pipe blockage, and the quality of the oil pipe, it is recommended that you go to the repair shop to check and replace, I hope mine will be of some help to you. Have a nice ride! [Car questions, ask the car master.]

    4S shop professional technician, 10 minutes to solve. 】

  8. Anonymous users2024-02-05

    Hello, generally there is a problem with the quality of the tubing, or the tubing is clogged and the pressure is so large that the pipe bursts. [Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

  9. Anonymous users2024-02-04

    Hello, there are several reasons for the problem you described.

    The quality of the tubing itself is a problem.

    The tubing has been used for a long time, and the skin has been slightly cracked.

    Often killed in the direction, the tubing produces a pressure load, combined with the second straight burst out.

    [Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

  10. Anonymous users2024-02-03

    The troubleshooting of oil leakage is as follows:

    1. Check the steering.

    The connecting parts of the oil pipe, oil cup, steering gear and steering pump in the system.

    2. At the oil inlet of the pump, if the oil inlet pipe is loose, oil seepage often occurs here, so it is required not to hit the oil inlet pipe at any time.

    3. Check the interface between the oil pipe and the steering pump, if there is oil leakage here, you need to replace the sealing ring again, tighten the installation bolts on the oil pipe, and the quality has nothing to do with it, and the steering pump does not need to be replaced.

    4. Check whether there is oil leakage in the engine block, oil tank, steering pump oil cup, transmission oil tank and transmission cooling oil pipe (note: there will be no oil leakage in the case of no damage to the steering pump).

    5. If the oil leakage at the oil cup may be due to the poor cleanliness in the steering system, the valve core in the flow pressure control valve of the steering power pump is blocked by foreign bodies, and in the case of fast steering wheel, the oil return pressure in the oil cup of the steering power pump is too large, and the oil outlet of the pump is blocked, and the pressure oil often leaks outward from the air hole of the oil cap of the oil cup, thus causing the illusion of oil leakage of the power steering pump.

    How to repair the fault of oil leakage:

    1. Replace the seals and tubing, and tighten the bolts of each joint.

    2. When the oil level is lower than the specified value, the power steering oil should be replenished in time.

    3. If the engine block, oil tank, transmission oil tank and cooling oil pipe leak, the engine, oil tank, transmission and cooling oil pipe need to be overhauled.

  11. Anonymous users2024-02-02

    Power oil leakage is a common phenomenon caused by improper driving. It is difficult for ordinary people to completely avoid killing the direction when hitting the direction, and when the direction is killed, the pressure of the booster tubing will increase, and the oil leakage may occur at the interface of each tubing (rubber parts). So don't kill the steering wheel at ordinary times.

    The consequence of killing the steering wheel will cause the oil pressure in the steering machine and steering high-pressure oil pipe to increase, and aggravate the damage to the steering system. In fact, friends who drive well know that the performance of the car is not good when starting in the dead direction, because at this time, the power direction of the vehicle and the direction of the vehicle are at a large angle, and part of the force is lost.

    Therefore, it is recommended not to kill the steering wheel, let alone for a long time, so I would like to remind all riders to pay attention when turning the steering wheel, the steering wheel is a leader for the car and a guarantee for the life safety of the driver.

  12. Anonymous users2024-02-01

    The power steering system can damage the steering wheel"Killed"Time do not exceed 15 seconds 2008-08-23 [Font size: large medium small] Mr. Qiu, the owner of the car, sent an email to inquire: when the car started in the morning, it was found that the steering wheel was very heavy, and it turned out to be caused by the rupture of the power steering oil pipe, but the car just finished the test a week ago, I don't know what caused the power steering oil pipe to rupture?

    Liu Yu, a senior technician in an automobile repair plant, said that because it had just been tested, the reason for the rupture of the power steering oil pipe was likely to be improper parking. For the sake of convenience, many car owners do not turn the steering wheel back to the right when parking, but beat the steering wheel to one side and park it overnight.

    In fact, this is harmful to the vehicle, because the power steering system of the vehicle is generally hydraulic, when the steering wheel is killed to one side, the pipeline on one side will bear a lot of pressure, which may lead to the leakage of the oil pipe of the power pump on this side, or even burst on the spot, resulting in power steering failure. Experts remind car owners and friends that when parking the vehicle, be sure to return to the steering wheel, and try not to "kill" the steering wheel for more than 15 seconds, otherwise it will damage the power steering system.

  13. Anonymous users2024-01-31

    There is an overflow valve in the pipeline of the direction hydraulic power, the direction reaches the bottom when the hydraulic oil pressure is discharged, this valve can only be managed for a short time, if the steering wheel is not pulled back a little, the pipeline pressure is too large and a weak link may burst open. In addition: the direction of hydraulic power without oil still has a role, but many people can't move it.

  14. Anonymous users2024-01-30

    It is possible that the fuel pressure valve is blocked, and the pressure is too high, so the oil pipe bursts...

  15. Anonymous users2024-01-29

    Incomplete clutch disengagement leads to a long time of semi-clutch disengagement, which will burn the clutch plates.

    The clutch is unable to cut off power, resulting in the inability to shift gears.

    It is easy to cause traffic safety accidents.

  16. Anonymous users2024-01-28

    The booster pump oil pipe often bursts, one is to check the quality of the booster oil; One is to check the quality of the tubing; One is to check whether the tubing circuit is blocked; There is also a problem of driving habits, do not often kill the direction, so as to cause high pressure on the oil pipe.

  17. Anonymous users2024-01-27

    If this is the case for you, it is important to check whether there is a blockage in the pipeline system, which can be referred to.

  18. Anonymous users2024-01-26

    Hello You carefully check whether there is a crack in the lower oil pipe See if the oil pipe is tight. 4S shop professional technician, 10 minutes to solve. 】

  19. Anonymous users2024-01-25

    Hello may be the direction of the oil air is not drained clean, use a jack to fight up and drain it, thank you, I hope it will help you [car questions, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

  20. Anonymous users2024-01-24

    Hello, the oil pipe is aging, this is normal, and the other is that the oil pressure is high, but the oil pressure is high, and the car will have other problems. I hope my answer can help you. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

  21. Anonymous users2024-01-23

    The oil pipe is aging, the oil pressure is high, the oil pressure regulator, and the oil return pipe are blocked. 4S shop professional technician, 10 minutes to solve. 】

  22. Anonymous users2024-01-22

    Hello, that's caused by the material of the inlet pipe, you won't be talking about a Ford car, right? 4S shop professional technician, 10 minutes to solve. 】

  23. Anonymous users2024-01-21

    It is generally caused by the aging of the oil pipe and the stuck oil pressure regulator [If there is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

  24. Anonymous users2024-01-20

    It should be that the material of the tubing is poor, or there are other things that often touch or corrode the tubing

  25. Anonymous users2024-01-19

    One is to check the quality of booster oil; the second is to check the quality of tubing; the third is to check whether the tubing circuit is blocked; Fourth, the problem of driving habits, do not often kill the direction, so as to cause high pressure of the oil pipe.

  26. Anonymous users2024-01-18

    Occasional cracks are due to the aging of the hose and other reasons, and if it is often cracked, it should be changed to a driving habit, and the steering machine should not be often buckled when cornering, resulting in high pressure of the booster pump pipe.

  27. Anonymous users2024-01-17

    When parking, turn the steering wheel back to the right and don't turn off the engine when you hit the direction.

Related questions
6 answers2024-07-04

Envision is definitely more cost-effective than King Kong, the engine Vision is all-aluminum, generation CVVT variable valve technology, King Kong is an ordinary engine, the body is iron, but King Kong's engine technology is very mature, but the engine of Vision is more fuel-efficient than King Kong; The configuration is almost the same; In terms of space, the vista is one size larger than King Kong; In terms of safety, the Envision should be better than the King Kong, after all, the Envision is the first batch of domestic cars to pass the 4-star collision. I'm using Vision now, which is great and great value for money.

9 answers2024-07-04

The reasons for the steering wheel sinking are: 1. Insufficient booster oil, 2. Tire pressure is too low, 3. Bearing fit is too tight, 4. Booster problem, which can be dealt with according to the actual situation. >>>More

8 answers2024-07-04

Hello car owner, now it is best to add antifreeze, otherwise after a period of time it will be cold, you can freeze and crack, If you have any questions, please ask, I am happy to answer for you, I hope mine can help you, I wish you a happy car [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

15 answers2024-07-04

Electronic power assist, in fact, is the power provided by electricity, theoretically the car is powered on to help (in fact, most cars still have to start to give power), the advantage is that the steering wheel is easy to make light, and can be adjusted to high speed heavy, low speed light, and basically does not consume fuel (electricity is also burned, but the energy consumption of electric power is much smaller). The disadvantage is that there are many kinds of electric power assists, some of the electric power assist points to the feedback is not good, and some electric power assisted cars, the feedback of turning is very poor, and it is basically up to the driver to turn back. Another point of electric power assist is that there is no power assist oil. >>>More

10 answers2024-07-04

In the long run, turbocharging is certainly promising, because it does not take up the effective work of the engine, and uses the heat that the engine would otherwise waste to propel the turbine into rotation. When driving at a constant speed, such as suburban roads and highways, the efficiency of the turbine is very high, because the turbine has a characteristic, that is, the turbo hysteresis, that is, the turbo value of the turbo can not be synchronized with the suction demand of the engine, and when driving at low speed or on a congested urban road, the turbine can not start normally, but will cause the engine to be insufficient because of the exhaust obstruction. If you want to overtake the car and go down with one foot on the accelerator, the power will come up a few seconds later. >>>More