Ceiling fan light how to install, ceiling fan light installation step tutorial

Ceiling fan light installation method: Step 1: To power off the circuit, remove the corresponding fuse or trip the corresponding circuit breaker. Alternatively, you can operate the main switch to cut off the main power supply in your home.

Step 2: Remove the original light fixture from the ceiling. Most luminaires are bolted or screwed to the ceiling and can be disconnected when the cover is removed.

Step 3: Lower the light fixture, and disconnect the wires. Mark each wire with masking tape so that it can be identified later.

Connect the black and black wires, the white wires to the white wires, and connect the remaining ground wires (bare or green) to the metal junction box or another location recommended by the manufacturer. Use a wiring nut to make the connection and check if it is secure after connection.

Step 5: Check the wiring, consult the manufacturer's instructions, and carefully push all the wires into the junction box (metal box or plastic box for electrical connections).

Step 6: Follow the manufacturer's instructions to attach the ceiling fan to the junction box or hook.

Step 7: If installing the light under the fan, make sure that the two parts belong to the same brand and are designed to work together (this will make the installation process much easier). Remove the bottom cover from the fan unit, then pull out the ends of any loose wires and connect them according to the manufacturer's instructions.

It usually refers to the connection of black wire with black wire, white wire with white wire, and connection of ground wire with ground wire.

Step 8: Re-energize the circuit and test the system. In fact, you can do a lot of home appliance repair work by yourself. However, be sure to take appropriate safety precautions and contact a professional if necessary.

Precautions for installation of ceiling fan lights:

1.The height of the floor is not less than meters. When installing the ceiling fan lamp, it is required that the height of the ceiling should not be lower than the meter as much as possible.

Below the meter to use the ceiling installation method, the best is the highest person in the family stretched out the arm can not touch the distance, that is, the distance of the meter installation is appropriate, so it is relatively safe. If the floor height is more than 3 meters, the boom should be lengthened, because it is too high, and the air volume felt by people standing under the fan is not ideal.

2.The ceiling does not have a keel, and the ceiling fan light cannot be installed. Ceiling fan lights have very high load-bearing requirements.

The load bearing is less than 30 kg, the ceiling must be a keel ceiling, so that the screws can be driven into the cement floor, if the ceiling is gypsum board, the ceiling is not well stressed, and it cannot bear 30 kg. Therefore, when you want to install a ceiling fan light, it must be a keel ceiling to be installed.

3.The route should be communicated with the designer in advance. The installation of ceiling fan lights should be communicated with the designer in advance, and the circuit layout will reserve the fan line and lamp line in advance.

4.The installation of ceiling fan lights should also consider the decoration style. Installing ceiling fan lights should also pay attention to the overall home style. Generally speaking, bronze ceiling fan lamps are more suitable for retro style or Chinese classical style, and light-colored ceiling fan lamps are more suitable for Mediterranean style decoration and pastoral style.

1.Prepare tools and materials: ceiling fan lights, ceiling fan light accessories, screwdrivers, electric drills, wire pliers, wires, wire sleeves, ceiling fan light remote control punch (optional).

2.Determine where to install the ceiling fan light, use an electric drill to punch holes in the ceiling, and install the hook.

3.Fix the hook of the ceiling fan light to the hook on the ceiling, and pay attention to the hook of the ceiling fan light to align with the ceiling hook.

4.Thread the wire of the ceiling fan light through the hook, strip the wire with a wire plier, and plug it into the wire sleeve.

5.Connect the wires of the ceiling fan light to the wires on the ceiling, use a wire plier to strip the wires, insert them into the wire sleeve, and then use a screwdriver to secure the wire connectors.

6.Install accessories for ceiling fan lights, such as lampshades, bulbs, etc.

7.If you have a remote control, install the remote control according to the instructions.

8.Turn on the power and test if the ceiling fan light is working properly.

9.Complete the installation of the ceiling fan light, pay attention to safety during the installation process, and avoid accidents such as electric shock and falls.

1. First of all, pay attention to the material and weighing coefficient of the ceiling, the ceiling fan lamp must be installed on the top of the cement or solid wood ceiling, not directly on the ceiling. If the ceiling has been done in advance, you can dig a small hole in the ceiling, install the hanger on the cement ceiling in the ceiling, and then use the extended boom to pass through the small hole, hang the lamp, and cover the hole with a decorative hanging bowl. After confirming that there is no problem with the installation position, use several expansion screws to secure the hanger to the ceiling.

2. Put the hanging bowl into the boom, lead the wire of the motor out of the inner hole of the boom, and be careful not to pull the wire hard. Then put the end of the boom with two holes into the head at the top of the motor, rotate and align the hole, insert the connecting bolt, lock the safety bolt, and tighten the fixing screw. Bend both feet of the socket pin to prevent the socket pin from falling off.

3. Hang the installed motor on the hanger, pay attention to the slotted hanging ball on the top of the hanger, and get stuck in the bump of the hanger, and check whether the mold is stuck firmly after hanging. There is a wire mark on each wire, connect the wire according to the identification, then put the wire into the junction box, push the hanging bowl to the top, and lock it firmly on the hanger with screws.

4. Align the small hole on the fan blade with the small hole of the leaf fork, lay the rubber gasket, lock it with screws, and put it carefully after installation.

5. Fix the assembled fan blades to the motor in turn and tighten the screws. Then gently rotate the fan blades with your hand to see if the motor is flexible and check the parallelism of the fan blades. The fan blades are inclined after installation, in order to have a sweeping angle, and the high bottom of each fan blade should be on the same horizontal line on both sides.

6. Assemble the lamp stand, connect the wires, and fix the lamp stand and the motor with screws. Unscrew out the lamp head ring, install the lampshade, lock the lampshade with the blue wheel lamp head ring, install the light source and screw it tightly.

7. After the overall installation, check whether all the screws are tightened, energized and operated, and test whether the ceiling fan light is normal and stable. If there is shaking, it means that the fan blades are unbalanced, and the balance is adjusted with a black balance weight. Observe the fan blades at the lowest windshield to find the unbalanced one, place the balance weight on the back of the fan blades, and run the observation again until the ceiling fan light no longer shakes when it is running.

8. Stop after 10 minutes of trial rotation and confirm again that all screws and spiral rings on the ceiling fan are not loose. Confirm that the rope switch remote control and wall control can be used normally.