After decoration, I found that the tiles were uneven, what should I do?

For most owners, understand more tile identification skills and methods, it may not be useful, to the scene you will find that you feel that the quality is not good 20 yuan per piece, *** of 70-150, you can not distinguish where the good is, where the difference is. Because the surface of the brick body is sanded and polished, the surface is very smooth, and it is more resistant to grinding than ordinary floor tiles, so it is called polished brick. Because of its hard, wear-resistant and corrosion-resistant characteristics, polished tiles are widely used in the paving of large spaces such as living rooms, balconies, and corridors.

<> big brands have natural advantages compared with small brands in terms of style, quality and service of ceramic tiles, R&D and design talents, and the coverage of sales and service networks are incomparable to small brands. There is no standard answer to what brand is better, and in terms of brand size, it must be the top dozen. If you talk about the difference in quality, it won't be very big.

Combined with the selection of the store where you buy tiles, see if the service of the store is good.

The light carcass is much looser, the brick-making process is to add adhesive with stone powder, and then stamped through thousands of tons of equipment, so the higher when the brick equipment is very expensive, medium and low, when the old machine eliminated by large companies The pressure tonnage is small, and there are four bricks for splicing, the specific size of the brick should be based on the size of the area, if the living room area is relatively large, you can choose 1000*1000, if it is a small living room, the tile may need to choose 600* 600, the choice of tile size directly affects people's visual touch, and the glaze of the tile mainly plays a role in increasing the beauty of ceramics. Glazed tiles are divided into floor tiles and wall tiles according to the place of use. According to its finish, it is divided into matte glazed tiles and glossy glazed tiles.

At present, there are more matte glazed tiles for floor materials.

Like Mona Lisa, Dongpeng, Jin Rudder, etc., these brands can be, I use Jin Rudder tile, has a history of more than 20 years, is a first-line brand of Chinese ceramic tiles, product quality is not bad, there is no fishy smell, I think it is very good.

You can contact the decoration master to re-paste the tiles, so that they can carry out reasonable remedial measures according to the actual on-site investigation, and they must deal with it as soon as possible.

The tiles should be destroyed and re-paved. Be very careful when decorating tiles, which are particularly prone to becoming uneven, so we should be extra careful when decorating.

If the tile is uneven, there is a way to repair it. Nowadays, when many families decorate their houses, they will use tiles to stick to the wall or floor, and the effect is very good. In addition, they can choose the right tile according to the decoration style of their home.

There are many styles of ceramic tiles sold in the market, and there are many opportunities to choose. However, when pasting tiles, you also need to pay attention to the way of pasting, otherwise it is very likely that the tiles will be uneven.

2.If there is a bulge in the floor, you need to cut the floor tiles with a professional blade, and prepare a sponge dipped in water as an aid to cut and remove the badly damaged floor tiles, so that there is enough space for tile leveling. If the degree of inner porcelain of the tile is very low, the decoration laid directly will be deformed due to the action of cement, and the tile will be warped, which will have a great impact on daily use.

Therefore, when buying ceramic tiles, it is recommended to choose the brand, quality ***.

3.The tiles purchased in the home renovation will be marked on the back or bottom in the correct direction of laying, and in general, the builder will also lay the tiles in the specified direction. In this way, not only can the tiles be over-connected with the tiles, but the overall effect of the pavement is good, and the overall construction quality will also be improved.

The above is the answer to the question of uneven tiles, what are the good ways to deal with them.

Tile unevenness, the best way to deal with the uneven tile is to connect the uneven tile to fill it to a certain extent and the product to re-pave, you can choose to re-paste the uneven tile, replace the whole thing, pave the tile to a certain extent, and repair the uneven place.

If it is only a small area of tiles, uneven phenomenon, you can replace a tile again, if it is a large area of uneven phenomenon, you need to re-pave, in the re-construction must check the number of tiles and the flatness of the ground, to avoid the situation of incomplete paving again.

You can remove the uneven tile and replace it with a new one, or you can polish the uneven floor, or you can find a professional to deal with it, because this situation is very troublesome, the cost is very large, and it is not easy for us to operate ourselves.

When the tile is uneven, you can choose to fill the gap in the tile with sealant, or you can choose to pick up the tile again and polish the ground before laying. Or you can choose to make use of a tile filler purchased online.

At this time, to redecorate, directly ask the master to remove all the tiles, and then re-paste the tiles, or you can carry out partial repair, **uneven repair**.

When the brick corners are not flat, the brick corners are uneven, and the quality of the tiles themselves is generally the majority. The tile is arched, low around and high in the middle, similar to the shape of the pot lid, but the arch is small, and we do not pay attention to it in the daily purchase and use. The effect is similar to our daily life that the earth is a sphere, but the earth we see has no arc for a reason.

The specifications of the tile firing process that cause uneven corners are not up to standard, the material is poor, and the tile is deformed during firing. This kind of brick is not only uneven, but also of different sizes, and must be adjusted by leaving joints when laying.

It is best not to choose, generally cheap tiles, ceramic tiles are prone to this kind of problem. Repair: If it is a tile quality problem, it is difficult to repair. If not, you can knock the bricks off and re-pave.

If it is hollow and the tile is loose, you can remove the brick, re-pave, or inject glue into the brick joint. If it is caused by no seams, it can only be re-paved. The uneven corners of the bricks caused by the quality problems of the floor tiles can be used to weaken the height deviation when paving, and the arch in the middle of the floor tiles after the four corners are leveled can try to pressurize with heavy objects until the cement mortar solidifies.

In the past, we used the topwood method to deal with uneven floor tiles, although the effect was okay, but it was very troublesome! What is the situation of a horizontal error of 10mm per meter? I can analyze it using the criteria for the horizontal error of the tile.

800 specifications of high-quality ceramic tile four-sided center level error, the enterprise internal control standard is less than or equal to, the national standard is. The internal control standard of the first-class product is less than or equal to, and the national standard is. If the tile is paved with a good joint, even if the level error standard of the first-class product is paved, it will feel very flat and the effect can be. With my 20 years of experience in the development of the ceramic tile industry, I rarely look at the tiles with more than the level error. The horizontal error reported by the owner actually went to 10mm, even compared with the worst tiles, it is several times different.

If there is such a large horizontal error, the tile force will also be uneven, and soon there will be bulging, cracking, hollowing, and then it is necessary to rework, and live in, more troublesome. By identifying the problem early, the rework loss is minimal.

There must be some quality problems, otherwise this will not be the case, and it is better to replace the uneven floor tiles with new ones, or use cement mortar to fill them.

The uneven floor tiles are not necessarily a problem of quality, and it may also be that the floor tiles are pasted after the ground itself is not leveled. It needs to be re-repaired.

1. When the tile is trampled on and causes it to sink, you can call the decoration worker to re-pave and smooth it, and you can repair it in an uneven place. If several bricks are uneven, you can take out the uneven floor tiles and replace them with new tiles. If a large area of floor tiles is uneven, it is best to re-install the tiles to avoid affecting future walking.

What to pay attention to when laying tiles.

1. Check before paving.

Pay attention to check the quality of the tiles before laying them, after all, it is also very troublesome to rework. Therefore, when paving tiles, you must first check the size and color of the purchased tiles and the same as your own plan, whether there is any color difference or missing corners, etc., only the quality of the tiles can start construction.

2. The ceramic tile pre-arrangement is beautiful.

Before the tile is paved, it is best to pre-arrange it to every corner to avoid incomplete paving. When the tile is pre-arranged, the problem of non-whole tiles should be avoided, and if there is a non-whole phenomenon, it should be laid in an inconspicuous part, such as: behind the door, under the cabinet, etc.

3. The wall must be flat.

Before paving the wall tiles, first of all, we must ensure that the wall surface is flat, otherwise the wall tiles will fall off in the number of envy and how long it will take, so once the wall is found to be uneven, the wall should be smoothed first. Moreover, the base layer of the wall should be dealt with well to avoid the problem of stains and cracks.

4. The tile should be soaked in water.

There are small voids inside the tiles, and the tiles also have a certain absorbency, so remember to soak the tiles in water when paving. If the tile is not soaked in water, the tile will absorb the moisture in the cement, resulting in poor tile bonding, which will eventually lead to hollowing, tile falling off and other problems.

Summary: The above is about how to deal with uneven tiles, I hope it will help you! There are many problems to pay attention to when laying ceramic tiles, so you can learn from the above methods when constructing.

As an important decoration material, ceramic tiles will inevitably have various problems during construction, many friends are complaining that the tiles laid at home are uneven, a little uneven, and sometimes accidentally fall, which is very dangerous. So is tile unevenness a quality problem? What causes uneven tiles?

Here is an introduction to the treatment method of tile unevenness.

Is tile unevenness a quality problem?

Not necessarily, there are many reasons for the poor flatness of tiles, the main ones are as follows:

1. The tile is paved in the wrong direction.

Ceramic tiles need to be made by 1200 degrees of high temperature of the shed, so there will be concave and convex inside, in order to ensure that the paving effect is good, the bottom layer of the tile will be marked with arrows, prompting the unified construction in accordance with this direction, if the direction is wrong, the mistake will also appear uneven.

2. There is no reserved gap in tile paving.

Because the owner may not know much about the decoration, in order to ensure the beauty, the construction did not reserve a gap for the tile, but the tile will be affected by thermal expansion and contraction, and the moisture of the mortar inside will volatilize, resulting in an uneven state in the place where the tile drop is large.

3. There is a thickness error in the tile.

The difference between the thickness of normal tiles is maintained at 5 to 10 percent, for example, the error of 10 mm thick tiles is plus or minus 1 mm, if the thickness of 9 mm and 11 mm tiles are constructed together, and the paving is not flattened, there will be a difference of two mm.

4. The thickness of different tiles is different.

In order to make the effect better, sometimes mixed bricks or parquet are used, and different types of tiles are used, but the thickness of different types of tiles is different, so there will be unevenness.

5. The construction technology is not in place.

During construction, if the workers cut corners or are not skilled, it will also lead to the problem of uneven tiles, so it is also important to find a reliable construction company before decoration.

How to deal with uneven tiles?

1. If there is an uneven situation in a small area of tiles, then the uneven place can be repaired, and new tiles can be used to replace the uneven tiles.

2. If the tiles at home are uneven in a large area, then there is no need to repair them locally, you need to knock off all the tiles, and then re-pave the new tiles, so as not to affect the overall effect, and at the same time in the process of walking in the future, it is not easy to step on the void, thus affecting the walking.

In fact, tile unevenness is not necessarily a quality problem, it may also be caused by the wrong direction of tile paving, no reserved gaps in tile paving, thickness errors in tiles, differences in the thickness of different tiles and lack of construction technology, etc., so in order to avoid this problem, we need to find a professional and experienced decoration master when decorating the house.

1. If in the process of pre-paving, the second piece of floor tiles appears uneven, the method of 180-degree paving should be adopted. In the process of pre-paving, if the second brick is uneven, the second brick needs to be rotated 180 degrees to pave.

This is because the 800 specification bricks are mainly used in the way of parallel discharge from the kiln, for this reason, the production process is mainly through the sticks on both sides of the kiln for up and down fire, so the 800 specification products will have the characteristics of two pairs of convex or flat sides, and the other side will also show the characteristics of flat or concave on both sides.

Paste method. If 180 degrees of paving still does not achieve the desired effect, then you may want to try the 502 adhesive method. The paved bricks, the four corners are knocked flat, and then the middle of the brick is protruded, and then the middle of the brick is flattened, this kind of small brick with a length and width of about 3 cm is knocked flat, and at the same time 502 glue is used to stick it, generally 1-2 minutes after 502 glue is needed to dry, so that the corners of the knock down are mixed to the bottom, so as to lay a brick again.

3. Top pressure paving method.

After the tile is paved, you can use a wooden stick for top pressing, or use a heavy object instead of top pressure to adjust the flatness of the tile.