Which is better, the common watering method or the soaking pot watering method

The soaking method refers to placing the pot in a shallow pot filled with water and letting the soil in the pot absorb the water on its own.

This sounds like a great idea, but there are pros and cons.

Advantages: As we all know, when watering flowers, the principle of not drying and watering is generally maintained, and watering is thoroughly watered. The soaking method starts to absorb water from the bottom, that is, the root end, so that there will be no watering that cannot be watered.

2.When watering some flowers, the soil is often lost, especially if they have just been planted or repotted, but this can be avoided by soaking the pot.

3.When sowing, some flower seeds are very small, like sunflowers, which are particularly easy to lose when watered, and unfortunately, flower friends are also distressed. If you use the dipping method, you don't have to worry about this problem.

Cons: 1Generally, how long to soak the pot, this is not easy to grasp.

2.This method is suitable for small bonsai, which are inconvenient to operate.

3.If this method of watering is used frequently, the soil will have no gaps in water for a long time, which will lead to a lack of oxygen in the roots and bring harm to the growth of plants.

4. It is also the reason that there is too much water, and the plant is prone to waterlogging, which is counterproductive to the original intention of flower friends.

It is possible to change the pot. Don't use wet soil, easy to rot roots, use damp soil, slightly with a little humidity, I think the peat bought by ** is a little humid when it is sent that is just right, you are also good, do not water after changing the soil, do not direct sunlight, at least wait for three days, I waited slowly for two weeks before watering, the problem is not big, three days of watering is not recommended to water thoroughly, first less, take your time, follow the dry and then water thoroughly after serving the pot, there will be a bottom meat slice in the pot to wither normally, When he stops withering and gently lifts it, he feels the grip on the soil, and the pot is over. Longevity flowers are also a kind of succulent, can be soaked in pots, but novices are not very easy to master, straw can be, very good, breathable, but I feel that the soil will keep falling, not clean, and it is estimated that it can not be used for a long time.

It is recommended not to use too large pots at the beginning, it is better to be larger than the meat, otherwise the root hairs will continue to grow without rest. Wait until the roots are full of pots and then change them to promote growth.

The three principles of soaking pots:

Principle 1: Use a large basin for water containers.

A large basin can be filled with more water, so that continuous soaking of the basin is not easy to cause the water level to drop significantly. After soaking a batch of pots, when you are ready to soak the next batch, you should add water to the large pot and add it to the same depth as the last time to ensure that the water depth is consistent.

Principle 2: Shallow water + longer soaking time.

How shallow is the water? It's best to just touch the bottom hole of the pot. In this way, the soil in the pot can slowly absorb the water in the pot. The water sucked up by capillary action does not cause water content in the soil.

Too large, the soil is more likely to remain breathable.

Principle 3: Soak until you see the humidity on the surface of the soil.

Only when the potting is immersed on the surface of the soil and the humidity is seen, we can probably know the current dry and wet condition of the potting soil. The dipping method takes about half an hour.

The dipping method is usually used for succulents.

On plants, and generally only for terracotta pots, because pots of this material allow water to penetrate slowly into the pot through the drainage holes at the bottom from the bottom up.

so as to meet the requirements of providing water to the plants. Usually when using the soaking method for succulents, it is usually done at night, when the water slowly penetrates from the bottom of the pot to the surface of the potting soil is wet, and the soaking is completed.

To place the pot in the water pot, add water and submerge it to 3 or 4 places in the pot, so that it is easy to water through, and it is more convenient and quick.

The soaking time is not fixed, you need to grasp the time, the soaking time is too short, the water is not fully replenished, and the soaking time is too long, which may lead to soil moisture. If the pot is small and the hole at the bottom is large, it will be soaked quickly, and if the pot is large and the hole at the bottom is smaller, then the soaking speed will be slower. Soak in water for about 10 minutes, take it out and observe the soil surface, and find that the soil surface is slightly wet.

Plant seeds are a common way to give water to the soil of the pot when the plant is grown in a pot.

Instead of pouring water directly into the pot, place the pot in a pot with a larger amount of water.

However, the surface of the water does not exceed the pot, and the water can seep evenly into the soil of the pot through the hole at the bottom of the pot.

It can avoid the situation of direct watering to wash over the soil or uneven watering.

Regarding the watering tutorial of the dipping pot method, the text is detailed as follows:

1. The method of soaking pots to water Changlu flowers refers to directly immersing the flower pots in water to achieve the purpose of watering. Prepare a larger pot, the size is to fit your pot completely, and then a little deeper than the pot, fill it with water, if it is tap water, it should be left for a day or two before it can be used, and the water temperature should be similar to the air or ambient temperature, just put the pot that needs to be soaked in water into the water. It seems simple, but it is also necessary to distinguish what kind of flower.

2. If it is a perennial woody bonsai, the potting soil is a pastoral soil, put the pot into the water, let the water not pass the pot and the potting soil, let it absorb water by itself, until you can't see the bubbles coming out of the pot, pay attention to the action when putting in or taking it out, the action is too large and the potting soil is easy to wash out, and it is not good for the plant after rushing out.

3. If it is a potted orchid with loose humus, the water is best to resist the empty stool not too much, do not pass the flower pot, the height of the water to two-thirds of the flower pot, and then put the flower pot into the water, because there is a vent under the pot, the water will be immersed in the soil from the vent itself, and the placement time is between three minutes and five minutes, and then take out the flower pot and put it on the ground to control the water, so that the excess water flows out from the exhaust hole at the bottom of the pot. Remember not to accumulate water, it will rot the roots.

If you often use this method, the water outlet hole at the bottom of the pot is also equal to (water) occlusion, which is inconvenient for the respiration of the root system and is easy to produce water rotten roots.

Advantages: 1. Prevent watering impermeability, as the saying goes, do not dry and do not water, watering is watering, this method can easily water the potting soil;

2. Prevent the loss of potting soil caused by water flow washing the potting soil when watering on it;

3. It solves the problem that the soil surface is higher than the pot and is not easy to infiltrate along the watering flow.

4. Some flower seeds are small, and watering is easy to wash over the soil, and the soaking method can be avoided.

5. The pot is dry and cracked due to lack of water in the soil, and if the watering from the top is often too rapid, affecting the water absorption, it can also be used to supplement the water by soaking the pot.

Disadvantages: 1. It is not easy to grasp how long it takes to soak the pot, or how much water to absorb.

2. This watering method is not easy to operate, and it is even more inconvenient to take this method for some large flowers.

3. If the soaking pot method is blindly used for a long time, too much water in the pot is easy to cause hypoxia, and it is also easy to lead to the rise of salt and alkali contained in the pot soil, which brings harm to the flowers.

4. If the soaking pot method is used for too long, it is easy to make the flowers suffer from waterlogging and cause the death of the whole plant.

Use the soaking pot method to water the orchid, these points should be kept in mind, otherwise it will be harmful!

The soaking pot method is suitable for dry soil, and can be used interchangeably with ordinary watering methods. View the original post

Only immersion irrigation can automatically regulate (i.e. closed-loop control) the humidity in the cultivation medium without excessive humidity. --I like this sentence View the original post".

The question is: does immersion really cause compaction? Why? View the original post

The water is usually sucked up in less than an hour, and the outlet hole at the bottom of the basin is blocked in less than an hour, and even within this hour, the roots can breathe through other routes. The water in the tray is moderate, even slightly less than the water used for regular watering. Water accumulation and root decay do not happen.

What I want to ask is, "Ordinary watering water goes from top to bottom in the soil, and I watering water goes from bottom to top, will the two different watering methods have an impact on the structure of the potting soil?" Will there be any effect on the salinity of the soil? Please advise all flower friends! ”