Newly bought flowers, changed pots, and watered them for a few days when they got home

Most of the plants are transplanted with dry soil, and they should be watered immediately after the potting, which can play a role in fixing the roots, and the watering must be thoroughly watered at this time. However, not all plants need to be watered immediately, and there are some plants that are drought-loving and not moisture-tolerant and can be left to dry for a few days after being repotted. It should be noted that the specific length of watering is not fixed, if you use wet soil for planting, so move the pot and dry it for five to seven days and wait for the soil to dry before watering.

1. When to water after moving the pot.

In general, most of the plants are planted with dry soil, and they should be watered immediately after the potting, this watering is mainly to play the role of fixing the roots, so that the roots and the soil are fully fitted, and they can take root more firmly. However, not all plants need to be watered immediately, and some drought-loving and moisture-tolerant plants can be left to dry for a few days after being repotted before watering. It should be noted that if you are using wet soil for planting, you should dry it for five to seven days after moving the pot and wait for the soil to dry before watering.

2. Other maintenance of plants after repotting.

1. Control the sunlight: After the plant is repotted, it cannot be raised directly in the sun, and if you suddenly see a strong light, it will cause the plant to be sunburned, resulting in a large amount of water evaporation, which will affect the survival of the plant. After the plant is repotted, it needs to be kept in a cool place with astigmatism, and when the plant gradually adapts to the seedlings and begins to grow normally, then give sunlight and move it to the sun for maintenance.

2. Fertilization problem: after just moving the pot, the roots have not yet taken root, and the absorption function is very poor at this time, so it cannot be fertilized immediately. You can wait for the later growth to be stable, and then gradually fertilize to supplement nutrients.

3. Keep ventilation: After moving the pot, the plants should be kept in a well-ventilated position to maintain good air circulation, and the stuffy place is not conducive to the recovery of the pot.

When changing the potting soil for flowers, it will accidentally hurt the capillary roots, which will cause the root system to be unable to absorb water and nutrients normally in a short period of time, and the whole plant may wilt. Many flower friends will mistakenly think that this state is a lack of water, so they will water it immediately, which will bring great harm to the plants.

If you use tap water to water the flowers, you need to take them out in advance and let them stand for about 1-3 days. Tap water contains some chemical additives, direct watering will affect the growth of flowers, can be taken out in advance for a few days, the chlorine in the tap water.

Volatilize it off and then bring it back to water. In winter, it is especially necessary to pay attention to standing, the temperature of the water is very low, you can leave it indoors for a few days, and wait until the water temperature is equivalent to the room temperature before watering.

The water quality available for watering flowers.

1. Rainwater: Rainwater is water in nature, which is more beneficial to plant growth, especially for acid-loving flowers, which can promote vigorous growth. When it rains, you can prepare an extra container to store some and use it for watering.

2. River and lake water: Generally, river water, lake water and pond water are rich in nutrients, which is beneficial to the growth of plants and can promote the growth of roots. However, river water, lake water, and pond water all contain some impurities, and impurities should be removed in advance.

Water can be bottled with mineral water and then alum added.

After stirring, let stand for 20 minutes and wait for impurities to precipitate, and filter out the water for watering.

3. Magnetized water: Magnetized water can also be used to water flowers, which can improve the activity of flowers.

The water that watered the flowers last night is now repotted with watering. Many people are afraid that the flowers will be watered to death when watering, in fact, the water we repot the flowers is called fixed root water, if you change the pot without watering, it is easy to have problems.

What is Rooting Water? If the soil has no moisture, it is planted directly with dry soil, the soil and the roots can not be combined together, we only through watering, the soil will be compacted after watering, so that the roots and the soil are completely combined, so it is called the root water. The root system must be moist so that it will not dry up, and the root must be thoroughly combined with the soil to ensure that it grows into the new soil, so that it can quickly recover and grow new roots.

If you don't water, changing the pot will hurt the roots, and the injured roots will dry up, which will eventually lead to wilting of the plant or even the death of the whole plant.

Flower Planting Management:

Adjust the sowing (planting) period.

Some flowers, under suitable growing conditions, can bloom as long as the plant body grows to a certain size. For this type of flower, its flowering period can be adjusted by adjusting the sowing (planting) period. Early sowing (planting) means early flowering, and late sowing (planting) means late flowering.

For example, most annual flowers do not have strict requirements for photoperiod, and can be sown in batches in areas or seasons with suitable temperatures. Seedlings are sown in advance in the greenhouse to bloom early.

Pruning, topping, bud removal.

Pruning, topping, budding and other cultivation measures were used to regulate the growth rate of flowers, so as to control the flowering period. Through pruning, topping and other technical measures, woody flowers or perennial herbaceous flowers can be made to bloom regularly.

Fertilizer and water management controls flowering.

Different nutrients have different effects on the growth and development of flowers. Generally, the application of nitrogen fertilizer can promote the vegetative growth of flowers and delay flowering, while the application of phosphorus and potassium fertilizer is beneficial to inhibit vegetative growth and promote flower bud differentiation. In the whole growth cycle of flowers, apply 3 to 4 times to emerald water-soluble fertilizer series products.

Artificially controlling the water to force the plants to fall defoliation and dormant, and then giving sufficient water at the right time can promote the release of dormancy, promote early germination and flowering.

It needs to be watered.

1.Watering. Usually watering flowers don't have nothing to do, it doesn't matter if the pot soil is a little dry, the most feared thing about the pot is that it is wet every day, especially those flower pots are relatively large and deep, many times although the surface is dry, in fact, the bottom of the pot is still wet, so frequent watering is easy to cause rotten roots.

2.Potting soil. Generally speaking, the flowers bought home from the flower market are with potting soil, just buy home do not rush to change the soil and pots, generally need to be housed for a period of time to adapt to the pot and then change the pot, it is best to change the pot with the original soil when changing the pot, so that basically it will not hurt the root system, and there is no problem.

3.Fertilize. There are two types of fertilization methods: top dressing and basal fertilizer.

Base fertilizer: Fertilizer applied to the soil before planting, the fertilizer can be spread on the bottom of the pot or mixed with the soil; Top dressing: Fertilize the plant during the growth period, taking care not to apply the fertilizer close to the roots.

When fertilizing, we must pay attention to the diligent application of thin fertilizer to prevent root burning, and water-soluble fertilizer can be applied to vine leaves.

Regardless of whether you watered last night or not, you must water thoroughly for the first time after changing pots, so that it is conducive to the close binding of the soil on the root system of the plant and the growth of the plant.

After watering, it is generally not possible to repot the flowers. If you change it, you don't need to rush to water it first, and then water it when it dries.

If the root system is not pruned during repotting, it can be watered immediately after potting, and it can be used for colonization. However, if the root system is pruned, do not water it immediately, otherwise it is more likely to rot the root system, you can dry the wound of the root system before potting, so that it can be watered immediately.

It is best not to water before changing the pot, and water thoroughly after changing the pot, so that it is conducive to the flower and slow down the seedlings, you watered the flower last night, "I think I should water the pot once after changing the pot today.

I watered the flowers last night, and I'm already changing the pot, do I need to water it? If the soil is not too dry, you don't need to water it, but if the soil is a little dry, you should water it a little!

This is required, if the plate is changed, the soil will become loose, then it is necessary to pour some water to compress the soil and roots, which is conducive to its growth.

Freshly repotted flowers need to be changed depending on what kind of plant they are, and generally do not need to be watered, unless they are moisture-loving plants. Plants such as cacti do not need to be watered, and succulents can be repotted with wet soil, so they can also be watered without watering.

For freshly repotted cacti, just fill the pot with flower soil, and there is no need for watering. As a super easy to raise and easy to live green plant, cactus is the first choice for many people who are not very good at raising flowers or are lazy, because it can grow quite well in one place for a month, and its growth will be relatively fast.

When succulents grow to a certain extent, they need to be repotted and soiled. Generally, in March, it is necessary to combine the repotting for branch culture. You can only water after planting after the succulent pot is repotted, but the potting soil should not be too dry when changing the pot, and the potting soil should be kept moist.

When changing pots, you can use wet soil, so you don't need to water again.

According to experience, it is better to plant new flowers in pots with damp soil than with dry soil. The tidal soil is the tidal soil that feels the moisture when you pinch it by hand, but the tidal soil will not stick together, otherwise the soil that sticks together is no different from the watered one. With tidal soil, you don't need to worry about the roots being soaked and damaged, resulting in poor plant growth.

Even some flowers with fast root resilience and strong absorption capacity can be watered after the soil has dried out after planting.

Therefore, changing pots and watering depends on what kind of plant it is, and it is necessary to explore the properties of the plant, and then water it according to the demand, otherwise it is easy to damage the flowers. It is also important to note that the frequency of watering should not be too frequent.

Be sure to water it well. After watering, the soil and root system can be tightly integrated, so that new roots can occur, which is conducive to survival. If not watered, the root system and the soil can not be tightly integrated, and it is difficult to root and affect the survival rate.

When choosing a flower pot, you should also pay attention to the size, the height should be appropriate. The flower pot is too large, just like a thin person wearing big clothes, which affects the appearance, and the flower pot is large and the plant is small, and the plant can absorb water and the pre-rent force is relatively weak. After watering, the potting soil will be kept moist between the rocks for a long time, and the flowers and trees will have difficulty breathing, which will easily lead to root rot.

The pot is too small, it looks top-heavy, and it affects root development. In addition, there are three points for reference when choosing the size, height and height of the flower pot

The diameter of the mouth of the pot should roughly match the crown diameter of the plant.

For plants with mud balls, after placing them in the pot, there should be a 2-4 cm gap around the pot to allow new soil to be added.

Plants without mud balls should be able to stretch out after the root system is placed in the pot, and should not be bent. If the taproot or fibrous root is too long, it can be pruned properly and replanted in pots.

1. After changing the pot of flowers, it is generally 3-5 days after watering, and when changing the pot, pay attention to the need to properly prune the roots of the plant, mainly to cut off the dry and rotten roots. It is best to use potassium permanganate after pruning the roots. And the scissors used should be sterilized first to avoid bacteria invading the incision.

2. Herbaceous branches with ornamental value are the general name of plants used to appreciate in Sanjing, which is sun-loving and cold-resistant, short branches with reproductive functions, and there are many kinds of fierce halls. A typical flower, on a short, limited-growth axis, bears calyxes, petals, and stamens and pistils that produce germ cells. The flowers are composed of corollas, calyxes, receptacles, and stamens, and come in a variety of colors, some of which grow brightly and have fragrances.

The newly bought flowers can be directly repotted, but for novices, it is best not to change the pot in a hurry, otherwise the whole plant has not adapted to the new growth environment, which will affect the development of the root system.

Newly bought flowers can be repotted directly, but for novices, it is best not to change the pot in a hurry, otherwise the whole plant has not adapted to the new growth environment, which will affect the development of the root system and cause damage to the leaves and branches, it is recommended to place it in a cool and ventilated place for a period of time.

Before depotting, loosen the soil in the pot, then remove the flowers and plants from the original pot, remove the old soil from the roots, keep one-third of the original soil, and finally replant the flowers into the new potting soil, and water the root water once after planting.

Planting flowers and plants choose more clay pots, this kind of flower pots have good permeability, help the respiration of plant roots, the soil can be prepared according to the growth habits of flowers and plants, generally to meet the requirements of loose and fertile, good drainage, it is recommended to mix with garden soil, humus soil, and sandy soil.

After the newly bought flowers are successfully repotted, they can be placed in the semi-shade environment on the inside of the window sill, and after the plants recover their growth, they can be supplemented with an appropriate amount of flower fertilizer, and the dead leaves and diseased branches should be cut off in time during the growth period, and the excess flower buds should be removed during the flowering period to promote the large and colorful flowers.