How to change the building to water and electricity? What should I pay attention to?

Introduction: People must pay attention to skills when decorating the house, and they must be able to renovate their house after learning. <>

It is best to install the lights in the living room into a dual-control one, and you can design a few more sockets in the dining room and living room, and you must take into account the exhaust fan and bath bomb in the design of the bathroom, and you must consider waterproof when designing. At the same time, you can also make a few more power panels in the kitchen water and electricity design, because there will be more electrical appliances in the kitchen. <>

People must understand the layout of their rooms before decorating the house, and in the decoration of the bathroom, they must choose waterproof things, and they must also make other arrangements under the condition of ensuring that the bathroom does not leak, and they must not drill holes in the wall of their own rooms at will, because he will affect the stability of the house to a certain extent, it is best to choose some environmentally friendly homes, because in this way can create a healthier living environment. And the choice of lighting must be in line with the overall decoration style of the family, as far as possible to buy glass and stainless steel chandeliers. <>

If the house hydropower renovation chooses a bad material material, it will bring a lot of harm, first of all, it will affect the appearance, if the quality of the socket or lamp is poor, it will affect the overall decoration style, and the water and electricity decoration uses inferior products, there will be some problems during the installation, it will rust after a long time, so as to reduce the life of use, and the installed computer or bathroom material is not good, there will be water seepage for a long time, which will directly cause the user roof upstairs or downstairs to drip water, Causing distress to others.

The building must be changed to water and electricity, and it must be laid along the underground pipeline, so that it can save space and cost, and be careful not to lay it along the wall, which may not be good in subsequent maintenance.

It is very important to change the building to water and electricity, and in the process of changing the water and electricity at home, a special water and electricity master should be hired to operate. This is how it is safe to use.

I think we must plan well before changing hydropower, otherwise there will be problems again, and we must choose good materials for hydropower.

It is best to change the water and electricity of the building according to the living room design plan and your own specific requirements. It is necessary to pay attention to the quality of wires and water pipes, the diameter of sewage pipes, and the quality of construction.

Hydropower renovation is extremely important when building decoration, only according to the living room design drawings and their own specific needs for renovation design is the best, after taking out the specific renovation drawings, the decoration workers will carry out the slotting of the wall and the ground according to the drawings. Pipelines and cassettes will then be buried, and the circuit will be tested and the waterway will be tested to pave new pipes and wires, and the owner will be required to accept the construction after completion.

When the building is converted to water and electricity, it is necessary to think about all the equipment related to water and electricity, such as water purifiers, water heaters, kitchen treasures, and toilet basins, etc., and their specific installation locations must be planned in advance, and the installation method and whether hot water is needed. Before renovating hydropower, you should also think about whether to use a gas water heater or an electric water heater, and don't wait for the type of water heater to be replaced after the hydropower transformation is completed, and then it will be particularly troublesome to renovate.

For example, in addition to leaving a wash basin and toilet in the bathroom, as well as the inlet and outlet of the washing machine, you should also contact an outlet and install a faucet, so that it is convenient to wash clothes or mop the floor in the future. In addition, when the building is renovated for water and electricity, it is best to ask the cabinet manufacturer to come to the door to let them communicate face-to-face, so as to ensure the smooth installation of the cabinet and not affect the normal transformation of water and electricity.

When building water and electricity renovation, we must pay attention to the quality of wires and water pipes, because wires and water pipes need to be used for a long time, if you choose poor quality inferior products, there are often circuit failures or water leaks and other troublesome problems in the use of the meeting, which is particularly troublesome in maintenance. When hydropower transformation, we should also pay attention to the pipe diameter of the sewage outlet, try to choose a thicker sewage outlet and set up a filter screen to prevent the sewage outlet from being blocked. In addition, it is necessary to pay more attention to the quality of hydropower renovation testing, after the completion of hydropower renovation construction, to test the voltage and circuit, and to test the water pressure, after finding quality problems, to communicate with the construction party in a timely manner, maintenance.

Building renovation should pay attention to practicality and safety, so before the renovation, you must first consult a professional master and design it in advance. In the transformation, we should also pay attention to let professionals carry out the transformation, use regular hydropower materials, and pay attention not to affect others in the transformation process, and pay attention to water seepage, water leakage, electricity leakage, etc.

1.The water pipes should be along the wall as much as possible; Comprehensive analysis of common problems in new house decoration and water and electricity renovation;

2.PPR pipes are used for tap water pipes, the pipes are bright red for heating pipes, and the pipes are basket color for cool water pipes;

3.The wall sealing groove needs to be leveled, and the pavement joint can not be higher than the pavement 2 cm, which is conducive to tiling later.

4.The cold water pipe should be hot on the left and cold on the right, and the length of the connection head for cold water and hot water should be 15cm and off the ground. The height of the water part of the upper clamshell automatic washing machine. Flume. The height of the water supply part of the vegetable washing basin is 45-55cm;

5.If gas is available, a natural gas water heater is preferred, which can be used in the restaurant kitchen or for bathing with tap water. If it is far away from the electric water heater, you can consider installing the kitchen treasure independently;

6.The top of the water reform must be fixed with a metal hose clamp, and the interval should not exceed 60cm;

7.The drain of the shower room is hot on the left and cold on the right, the interval between cold water and hot water is 15cm, and the plan of the water outlet thread must ensure the level;

8.Hydropower line pipes cannot be in the same tank;

9.The wall is not allowed to open the spacing of the transverse grooves (30cm for load-bearing beams, 50cm for load-bearing beams);

10.After the drainage reform, the pressure test of the tap pipe must be carried out to ensure the smooth flow of each drainage.

I think it is the most common to change to above-ground water and electricity, and the cost is a little less; Before the hydropower, we should pay attention to find a professional plumber, otherwise the later maintenance project will be very troublesome.

In different regions, this method may not be applicable, and in the case that the network signal is not very good or even the set-top box and game console need to be used, the problem of partner's audio and embedded 50 sleeves needs to be considered. When transforming the TV cabinet of the set wall to form a complete set of equipment, it is more common to use a hanging TV cabinet or a floor-standing TV cabinet. However, some stylists can find that the height of the socket cannot be hidden in the installed TV cabinet during installation, which brings a good and obvious shape.

Hydropower renovation refers to the transformation process of using the original developer's waterway to complete or partially replace the circuit, which is an important part of the concealed project in home renovation, including waterway renovation and waterway conversion. Friends must know the effect of the backwater bend, but the two backwater bends cannot achieve the effect of 1+1=2! Therefore, when we decorate, we must pay attention to the effect of the backwater bend.

Now the washbasin water generally has its own backwater bend, two backwater bends used together, not only will lead to poor drainage, but also will appear odor-proof, blockage problems, before the installation of water pipe backwater reputation annihilation bend must be clear whether the washbasin water has its own backwater bend.

The reason for the layout of the water pipes is simple, our water pipes are installed under the roof. Even if the water pipe is leaking, we can easily tear down the roof for repairs. Many of my friends have taken this advice because it sounds very reasonable.

You can say that this method is a complete pitfall. My personal opinion is to change everything. The so-called radical renovation is to cancel the original indoor waterways and circuits and arrange new ones.

The above is a detailed interpretation of the problem, I hope it will help you, if you have any questions, you can leave me a message in the comment area, you can comment with me more, if there is something wrong in the void, you can also interact with me more, if you like the author, you can also follow me, your like is the biggest help to me, thank you.