What s going on with the pump s flow rate suddenly getting smaller? Is the pump broken?

The reasons for the decrease in the water output of the pump and the treatment methods are:

1. The filter screen of the water pump is blocked, and the debris of the filter screen should be removed.

2. The use of head is too high. If the use range of the pump is exceeded, the pump should be adjusted to the operating height or the pump with a suitable head should be replaced.

3. If the impeller of the pump is blocked or worn, the impeller debris should be removed. Replace the impeller if worn.

4. The outlet pipe of the water pump is blocked by debris, and the debris in the outlet pipe should be removed.

5. If the pipe diameter does not match the pump, replace the outlet pipe.

6. The gap between the pump cover is too large, which increases the volume loss of the pump, and the gap should be adjusted.

7. If there is leakage between the pump body and the pump cover, the screws of the pump cover should be tightened to make the pump body and the pump cover fit tightly.

8. The speed of the pump is low, and the voltage is too low. The voltage should be adjusted to the rated value and the thicker cable should be replaced.

Or avoid peak use.

9. The diving depth of the pump is too shallow and there is air intake, so the diving depth should be adjusted. The pump runs at a depth of not less than meters.

It is necessary to carefully check the indicators of the pump, including working conditions, such as power supply parameters, wiring, inlet water pressure temperature, outlet pressure, etc., if they are normal, it can only be suspected that the pump itself is faulty, and it needs to be overhauled, open the pump body to check whether there is an abnormal situation inside, and all parties need to cooperate to solve the problem.

Summary. Hello dear, the reasons why the water output of the pump is smaller are as follows

1. There is not enough water in the well, and the water level is too low.

2. There is a problem with the selection of water pumps.

If the amount of water becomes smaller after running for a period of time, there are also two possibilities:

1. The water level in the well is too low.

2. The impeller of the pump body is seriously worn. The solution is as follows:

1. Change a well with a large amount of water to pump water.

2. Choose different pumps according to different terrains.

3. Replace the impeller of the water pump body.

What is the reason for the smaller water output from the pump?

Hello dear, I am a teacher who asks a little friend, the teacher is good at electronic digital, software programming and engineering maintenance, electrical equipment use, etc., has been engaged in this kind of industry for 5 years, I am happy to serve you, please kiss and wait for a cup of tea, the teacher's will come to your eyes immediately

Hello dear, the reasons for the small amount of water output from the pump are as follows: 1. The water in the well is not enough, and the water level is too low. 2. There is a problem with the selection of water pumps.

If the water volume becomes smaller after running for a period of time, there are also two possibilities: 1. The water level in the well is too low. 2. The impeller of the pump body is seriously worn.

The solution is as follows: 1. Change a well with a large amount of water to pump water. 2. Choose different pumps according to different terrains.

3. Replace the impeller of the water pump body.

The water volume of the new pump becomes smaller, and the head cannot be reached?

In other words, you can be satisfied when you first use it!

Hello, the reasons for the small water output of the water pump and the treatment methods are: 1. The filter screen of the water pump is blocked, and the debris of the filter screen should be removed. 2. The use of head is too high.

If the use range of the pump is exceeded, the pump should be adjusted to use the height or replace the pump with a suitable head. 3. If the impeller of the pump is blocked or worn, the impeller debris should be removed. Replace the impeller if worn.

4. The outlet pipe of the water pump is blocked by debris, and the debris in the outlet pipe should be removed. 5. If the pipe diameter does not match the pump, replace the outlet pipe. 6. The gap between the pump cover is too large, which increases the volume loss of the pump, and the gap should be adjusted.

7. If there is leakage between the pump body and the pump cover, the screws of the pump section should be tightened to make the pump body and the pump cover fit tightly. 8. The speed of the pump is low, and the voltage is too low. The voltage should be adjusted to the rated value, and the thicker cable should be replaced or used to avoid peak use.

9. The diving depth of the pump is too shallow and there is air intake, so the diving depth should be adjusted. The pump runs at a depth of not less than meters.

1. Performance problems of the pump itself: It may be that the impeller of the pump is damaged or aging, or the motor performance of the pump has changed, or the pressure regulator of the pump has failed. 2. Pipeline blockage:

It may be that there is a blockage of debris in the upstream line of the pump, or the pipe itself is narrowed, causing the flow of water to be blocked, thus reducing the amount of water on the pump. 3. Insufficient water supply: It may be that the water volume of the upstream water source is insufficient, or the water pressure of the water source is too low, resulting in a decrease in the amount of water, which affects the water volume of the pump.

4. Blockage of the drain port: It may be that the drain port of the pump is blocked, resulting in a decrease in the amount of water on the pump.