What is the process of double piece solid wood flooring?

The solid wood floor of the double is a kind of building decoration parts, which includes the floor body, the longitudinal two edges of the floor body have the convex tenon and groove that are suitable respectively, and the transverse two edges of the floor body also have the convex tenon and groove that are adapted respectively. The floor is made of two longitudinal long blocks of solid wood plates; The upper surface of the floor is coated with protective paint, and the bottom of the floor is made with more than 2 longitudinal balance grooves. There are more than 2 longitudinal balance grooves at the bottom of the floor and are arranged symmetrically along the center of the floor.

The upper surface of the floor body has grooves that match the wood grain. The utility model improves the utilization rate of timber resources, and the processing amount is less, and the longitudinal flex resistance is good; The bottom is processed with a longitudinal balance groove, which is stable in size and good in flatness; Solid wood has a good foot feel, which can achieve the effect of optimizing the mechanical properties of wood flooring, and is suitable for hotel and home installation.

Installation Notes:

1. The ground should be flat and dry.

2. During construction, sprinkle insect-proof powder first, and then lay a layer of moisture-proof paper, and the moisture-proof paper should be stacked 20 cm with each other and coated with asphalt oil two to three times. Moisture-proof paper must be spread 10 cm above the corner of the wall.

3. The keel of the bedding must be dry.

4. In the humid East China, South China and some particularly humid areas, when installing the floor, do not lean too tightly between the floor and the floor, so as not to get the floor damp in the humid season.

Is it spelled by herringbone? **More than 30% more expensive than the regular one.

1. The pavement scheme should be constant.

For each stadium, or theater stage, what materials to pave, and how to pave, are determined according to the actual parameters of the sports venue and the investment budget. Therefore, once the sports wood floor paving scheme is decided, it should not be changed easily.

Frequent changes to the design and construction plan of sports wood flooring will cause additional investment and even affect the construction period. Therefore, in the design of sports wood floor paving scheme, it is necessary to communicate and coordinate with sports wood floor manufacturers, clarify standards, and avoid unnecessary problems.

2. Customized products should be in advance.

The overall structure of the sports wood floor is basically all solid wood structure, and the moisture content of the floor will be done according to the climatic conditions and moisture content changes of the installation project site during production, which is generally about 6%-14% on average. Before ordering sports wood flooring, it is important to allow sufficient time for production in order to ensure the quality of the flooring.

3. Avoid cross construction.

Cross construction, that is, the paving of sports wood floors, is carried out at the same time as other construction projects of stadiums and conflicts with each other. The sports wood floor paving project should avoid cross construction, so as to affect the smooth progress of the sports wood floor pavement, or the construction of other stadium construction projects destroys the paved sports wood floor floor.

4. Supervision and acceptance should be involved.

Although it is said that the installation project of sports wood flooring is operated by the pavement engineer of the sports wood floor manufacturer. However, the stadium contractor and Party A should also arrange a special person to be responsible for tracking and supervision, and solve the problems in the installation of sports wood flooring in a timely manner.

Laminate flooring and solid wood flooring are installed on the wall to see the size of the pavement area, the small area can be spliced first, and then framed with a picture frame with appropriate thickness, and finally the upper and lower end of the picture frame is fixed on the wall. The advantage is that it can be replaced, and the disadvantage is that the load bearing is limited; If the area is large, use floor glue to fix the floor directly on the wall (the wall surface is required to be relatively flat, and it is best to do waterproof treatment), and then use the edge strip to close the edge. Or hit the wooden bottom on the wall, and then fix the floor on the wooden bottom with nails and then close the edge, the composite floor nailing can be covered around the edge, and the solid wood can be obliquely beaten at the tongue and groove.

The advantages can be paved in a large area, but the disadvantages are high cost and not easy to replace.

Two. To have a wall effect on the wooden floor, in addition to the floor and floor wallpaper, there are also wood grain bricks that imitate the floor color, and the visual effect and the floor are almost indistinguishable, but the material is also more than 100 per square meter.

Three. On the floor and wall, you can consider the floor oblique paving or herringbone pavement (to see if the tongue and groove are suitable), and the effect is very outstanding.

Hardwood flooring is a flooring that is directly processed from wood and is the most traditional and ancient flooring. Solid wood flooring (also known as log flooring) has the advantages of no pollution, natural pattern, elegant and heavy, rich texture, elasticity and truth, and is the preferred material for floor laying in home decoration. Its disadvantage is that it is not wear-resistant and easy to lose its luster.

However, now there are products that can replace solid wood flooring, such as the new type of ceramic tile of Forest Wood, the appearance texture is very similar to that of solid wood flooring, but it is easy to take care of, does not contain formaldehyde, and has high hardness and good stability!

Summary. Waste of resources, high cost price.

The second disadvantage of solid wood flooring may be that the cost price of waste resources is relatively high, because it depends on the solid wood materials in nature, which is more wasteful of natural resources, even if it is destroyed, so relatively speaking, its cost price will be relatively high.

There are those disadvantages of duplex solid wood flooring.

Waste of resources, high cost price The second disadvantage of solid wood flooring may be that the cost price of wasting resources is relatively high, because it depends on the solid wood materials in nature, which is more wasteful of natural resources, even if it is destroyed, so relatively speaking, its cost price will be relatively high.

It is more difficult to maintain. Routine maintenance is required.

I'm asking if Larry is good?

Forehead. The stability of the conventional plate is better than that of the wide version. The loss of the conventional plate is also small, that is to say, the deformation coefficient of the conventional plate is small, so the stability is good. But grandeur is good when I spread out a wide version in a large area. So you should choose according to your own situation and needs.

Hello, I am glad to serve you, and I have found the network publicity through the teacher's inquiry. It is normal to buy a solid wood floor that is double-pinched. The double-piece floor is the source of the two materials, and the floor is spliced together.

It is often found on hardwood floors. There are single, double and triple parquet floors. Among them, the double-piece solid wood floor is made of two pieces of pure solid wood.

This kind of double flooring has better stability and is more durable. The quality is more robust and reliable. Don't worry.

May happiness hail Qiaole, with you, career success, happiness and happiness look forward to your <>praise

Nowadays, in some public places, you can see all kinds of assembled floors, assembled with a variety of patterns, which makes people shine. But there are still many friends who don't know much about assembling floors. So, what is assembled flooring?

1. What is assembled flooring?

1. Assembled floor is a new type of green environmental protection board with polypropylene (PP) as the main material. Originally, assembled flooring was only used for indoor football fields, but with the continuous advancement and innovation of technology, the usable field of assembled flooring has become wider and can be stationed in various trembling indoor fields.

2. Compared with the plastic surface layer and wooden floor, the spliced floor is lighter in construction and installation, and it is also convenient for mobile transportation. Even if it is exposed to wind and rain, it can maintain good stability, is not afraid of insect damage, and has a long service life. As a result, videotape flooring is often used for the laying of floors in various sports venues.

Second, the characteristics of the assembled floor.

1. Environmental protection. Its raw material is polypropylene, which is a non-toxic, non-polluting and harmless green and environmentally friendly material. Among them, PP material is also a food-grade material!

2. Low maintenance cost.

The site of the assembled floor is very easy to clean, only need to be washed with water, and no maintenance measures are required, and the maintenance cost is very low.

3. Cushioning and high elasticity.

If the floor is cut off, the whole is bow-shaped, and because of this structure, it has good cushioning, which can effectively reduce the injury of the athlete and increase the resilience to the ball. Gear up.

4. High outdoor utilization rate.

The basic structure of the assembled floor is a hollow structure of a bird's nest, and a sink is also designed at the bottom of the floor, so there will be no water accumulation after cleaning or rain, which also ensures the utilization rate of the floor and is also an important basis for long life.

5. Beautiful. The assembled floor is processed by precision molds, so the dimensional accuracy is very high, and the installation effect is also very outstanding. The product is spliced with high precision, coupled with the internal nest structure, it is difficult to see where the seams are without careful identification.

Coupled with the variety of colors, various patterns can be combined.

The visual effect of the double-spelled solid wood floor will be much better, and it will feel very atmospheric.

Laminate flooring is a non-standard term, which cannot be found in any national standards and normative materials. The term laminate flooring referred to by consumers generally refers to laminate flooring (scientific name: impregnated paper laminated wood flooring).

It is made by filling glue, preservatives and additives after the log is crushed, and is pressed by the hot press at high temperature and high pressure, so it breaks the physical structure of the log and overcomes the weakness of poor stability of the log. Laminate flooring has high strength and uniform specifications.

First, the wear coefficient is high, anti-corrosion, anti-moth and the decorative effect is good, which overcomes the problems of scars, insect eyes and color difference on the surface of the log. Laminate flooring does not need to be painted or waxed, has a wide range of uses, is easy to care for, and is the most suitable floor material for the rhythm of modern family life. In addition, the wood use rate of laminate flooring is high, and it is a good environmentally friendly material.

The composite wood floor is made up of several or more layers of criss-crossed, insect-proof and mildew-proof pine veneer as the base material, and the base layer is pasted with 5mm solid wood veneer, and the finished wood floor is evenly painted on the surface and tenon after the dust-free paint coating operation.