How to raise brazilwood hydroculture brazilwood hydroculture skills

1. You can use clean water, if you use tap water, you need to dry it for a few days in advance to maintain a good water temperature. 2. Change the water regularly, change the water once every three days at the beginning, and change it once every seven days after stable rooting. 3. Keep it in a transparent glass vase.

4. Appropriate astigmatism irradiation, not strong light irradiation. 5. Add some nutrient solution to the water regularly.

Dracaena (Latin scientific name: dracaenafragrans (L.)Kergawl, alias:

Fragrant millennium), a plant of the genus Dracaena in the family Asparagus, native to the Canary Islands and Guinea in Africa, has been widely introduced and cultivated in China. Dracaena can reach more than 6 meters in height, with thick stems and grayish-brown or light brown bark; Its leaves are broad, the leaves are clustered at the top of the stem, oblong-elliptic-lanceolate, without petioles, spike-like inflorescences, the flowers are small yellow-green, and aromatic. Dracaena is light-loving, likes high temperature and humidity and a well-ventilated environment, is shade-tolerant, afraid of scorching sun, and likes loose and well-drained sandy loam.

Arborous or shrub-like plants, which can reach more than 6 meters in height in the native area, have thick, multi-branched stems. The bark is grayish-brown or light brown with peeling bark. Potted plants are 50-100 cm high.

The trunk is erect and sometimes branched. The blades are broad. Leaf clusters are borne at the top of the stem, oblong-elliptic-lanceolate, sessile; Leaves 40-90 cm long, 6-10 cm wide, curved into an arch, undulating margins, slightly blunt tips; Bright green, shiny.

Spike-like inflorescences, small, yellowish-green, aromatic.

1. Water quality. The requirements for water quality are not high, and well water, river water, and pure water are OK, but if you use tap water for a long time, it is recommended to use it after drying to avoid too heavy chlorine and hinder growth. During the maintenance of the water do not need to be too diligent, the initial maintenance of four or five days to change the water, and so it can not be changed after adaptation, when the water is less to add water in time.

2. Temperature. Brazilwood prefers warm environments and has poor cold tolerance. The temperature that is conducive to its growth is between 20 and 25, and the temperature is low after winter, so it must be placed in a warm place and the temperature must be above 10.

In addition, it is necessary to pay attention to the high temperature in summer, and more than 30 should be ventilated to avoid breeding pests and diseases.

3. Illumination. Brazilwood has a certain shade tolerance and is not sun tolerant. During the maintenance period, it can be placed in a well-ventilated and slightly cool environment, and it can only accept the morning and evening glimmer, and occasionally bask in the sun. Direct light and strong light must be blocked in time and should not be exposed to the sun.

4. Add nutrient solution dropwise.

The nutrient content in the water is small, in order to promote the better growth of brazilwood, the nutrient solution needs to be added regularly during the water cultivation period, once in about 20 days, and once or twice in the container each time. Or you can also put a few grains of compound fertilizer in the water, the nutrients are sufficient and the germination speed is faster.

5. Precautions.

If you find moss on the container or brazilwood stump during the water-raised brazilwood period, you should clean it in time to avoid breeding bacteria and hindering growth.

2.Water control: Brazilwood is a water-loving plant with high air humidity requirements, but there should be no standing water in the potting soil.

3.Light requirements: strong sunlight in summer needs to be properly shaded, and full light can be accepted in winter and spring.

When it comes to soil, brazilwood is not too demanding, but if you want to grow better, it is advisable to choose loose, fertile and well-drained soil.

Brazilwood has good drought tolerance, but in the watering season, it is necessary to keep the potting soil moist, and the family potted plants generally follow the watering principle of "see dry and water thoroughly". During the growth period, the leaves can be sprayed with 100 times diluted nutrient solution every half month to replenish nutrients.

Question: I heard that you don't need to put soil.

That's a lot of water.

Almond trees are highly tolerant of barren soils and can grow normally on individual barren soils, but their yields will be greatly reduced. Therefore, when we cultivate, we should choose the soil with deep soil layer and strong permeability, which can ensure the growth of almonds, enhance the growth ability and increase the yield.

So almonds can be planted in the soil.

It is necessary to change the culture water every three days to ensure that the water quality is clean and clean, and it is also necessary to place the almond potted plants in a ventilated and breathable semi-shaded environment for maintenance to avoid the plants being exposed to strong light, and it is also necessary to add nutrient solution to the water every half a month to make the almond potted plants grow more vigorously.

<>1. Choose a container: You can choose a transparent glass container according to the size of brazilwood, and do antivirus treatment before use, and you can use carbendazim or potassium permanganese to disinfect it.

2. Water quality control: the most important thing for water and fertilizer is water quality, the better is well water, and river water or rainwater can be used when there is no condition, which is a good choice, and it is also necessary to pay attention to the replacement of water quality to avoid poor water quality affecting the growth of plants.

3. Waxing: The perennial large columnar brazilian trunk is sawn into stem segments of different lengths or the branches growing on the stem are cut off as the material, and the upper end of the stem segment as the material needs to be waxed.

4. Hydroponics: Cut the Brazilian wood into sections, cut the slices, dry it for a few days, soak the cuttings for 1 3 hours, change the water once every 3-5 days, and disinfect with a small amount of carbendazim aqueous solution. At high temperatures, placed under bright scattered light, it is best to shade the container with a black plastic bag, which can promote rooting.

5. Nutrient solution: In the early stage, the specified concentration of 1 2 leaf nutrient solution can be appropriately added, water can be added for 7-10 days, and the nutrient solution can be updated once in 25-30 days. The starting level of nutrients should not be too high, immersed in the roots of 1 2.

Maintenance method.

1. Vase: The vase should be selected with a larger capacity, and the vase made of transparent glass material can be generally selected.

2. Water quality: clean water can be used for breeding hydroponic brazilwood, and mineral water is also a good choice. The time to change the water at the beginning of breeding is about three days, and the water can be changed in about seven days when it grows for a period of time.

3. Nutrients: After hydroponic breeding, it is necessary to inject some nutrient solution into the water from time to time, and generally choose the nutrient solution containing nitrate nitrogen acidic substances, so as to protect the absorption of nutrients by its rhizomes and promote its growth needs.

4. Light: Proper sunlight exposure is fine, and soft light is more suitable for it. Too much light exposure can cause sunburn to its stems and leaves, which must be avoided.

Problem diagnosis and treatment

1. Yellowing of leaves: The roots of the plant will become soft and the leaves will turn yellow in the second year of growth. At this point, it should be removed from the water and transplanted into the soil so that it can continue to grow.

2. Curling of branches and leaves: Curling of branches and leaves is caused by the fact that the air in the environment is too dry and the humidity is not enough, because it likes a humid environment. Spray some water on the branches and leaves with a watering can when they are curled to make them moist.

How to raise brazilwood, it's very simple, come in and take a look if you buy it.

Brazil wood style elegant, rich in southern style, is a very popular indoor ornamental plant in recent years, many people like to carry out water farming, but always do not raise well, after a few days will wither, people are very distressed, today I will tell you four breeding tips, easy to breed to burst pots, so that your sense of achievement bursting.

1, some flower friends raise brazilwood only afraid that it will be thirsty, just add water to the bottle, fill the water to the full, brazilwood will not be thirsty to death in it, but will be suffocated, you think, the lower part of the plant is soaked in water, can not breathe oxygen, can still live?

Therefore, the water in the water raiser container can not be too much, be sure to expose the trunk to the outside part, I recommend that you soak the trunk of 2 3 cm in water on the line, not too long, so that the plant can breathe smoothly, it is difficult to keep it alive.

2, a friend of mine came back from a business trip for half a month, and was shocked when he came back, the wall of the container of water-raised brazilwood was covered with green moss, and there were small insects in the water, poor brazilwood was already dying, I told her to hurry up and treat it, clean the container, and then replace it with clean water, so that the plant could recover slowly.

Aquatic plants must be cleaned frequently, water change, especially in summer, the water is easy to breed bacteria and small insects, will endanger the health of brazilwood, it is recommended to change the water twice a week in summer, keep the water clean and hygienic. Note that it is best to use purified water for raising brazilwood, and if you use tap water, you should leave it for 1 2 days before use.

3. Many people think that as long as there is water, there is no need for fertilization, in fact, water-raised brazilwood also needs to "eat", just drinking water can only maintain the life of the slag, and the nutrition is sufficient to be full of vitality, so don't forget to fertilize the brazilwood.

Water-fed flower fertilization is also relatively simple, every 20 days to drop a few drops of nutrient solution into the water, generally can meet the needs of plant growth, Brazil wood stalks are stout, large leaves, in its growth period fertilizer needs a large amount of fiber punch mold, it is recommended to spray 100 times the nutrient solution of the foliar surface every half a month. The leaves of the plant are bright in color and the appearance is off the charts.

4. Soil-cultured brazilwood should be repotted every year, although the water-fed one does not need to be repotted, but the root system of brazilwood that grows for one year is aging, and it has been stuffed with containers, if you ignore it, some old roots have poor vitality, and the diseased roots are rotten, which will cause root infection, unable to germinate new roots, and brazilwood will gradually die.

Remember to prune the root system every spring to cut off the old, diseased, long, and dense roots, so that you can promote the growth of new roots, so that the plant is full of vitality and youthfulness.

Brazilwood, also known as fragrant dracaena, is a perennial evergreen tree foliage flower of the lily family dracaena, native to the African tropical rainforest in Guinea, now China has been widely introduced and cultivated, many people use Brazil wood as interior decoration plants, how to raise the Brazilian wood planted indoors?

1. Loose, well-drained, and humus-rich soil is required to be slightly acidic (?).Soil is appropriate.

Second, Brazilian wood is drought resistant, but insufficient watering will have an impact on its growth, the growing season often makes the soil in the pot moist, especially in the summer when the growth is vigorous, to fully water, but do not accumulate water, in the autumn, to gradually reduce the amount of watering, the winter dormancy period to control the watering, excessive watering will rot the roots.

3. Top dressing every 15 30 days during the growth period, stop applying nitrogen fertilizer in September, and apply phosphorus and potassium fertilizer two or three times a month to increase the cold resistance of the plant.

Fourth, the growth of brazilwood needs a temperature of 20 30, and it can spend more than 10 winters in winter, and when it is high in summer, proper shading is necessary.

Fifth, brazilwood likes sunlight, but rejects exposure and long shade, it is recommended to put the bag in a bright and ventilated indoor location for maintenance, if in order to watch in a dark room, you need to pay attention, after a period of time, put it in a suitable position for the sun.

6. The main diseases are soft rot, leaf spot and stem rot, ventilation and dehumidification can reduce the occurrence of diseases, and diseases need to be produced immediately.

Seventh, the plant is too tall or the lower leaves fall off will affect the ornamental effect, need to prune, generally from the root node to prune, the reduction of those thick branches and leaves, can be inserted into the new soil, as a new seedling treatment, cultivate new plants.

The above are the things that need to be paid attention to in the cultivation of brazilwood, if you want to know more deeply, you have to continue to practice on the road of planting brazilwood.