If you want to use burned cinders to make flower soil, how to do it?

When we raise flowers, we often pay attention to a lot of things, pay attention to the problem of watering, pay attention to lighting replenishment and ventilation, but there are still many problems. In fact, it usually has a lot to do with fertilizer supplementation. After all, the addition of flower fertilizer is of great help to flowers.

If the fertilizer supplement is wrong, it will also have some effect on the flowers. There is a substance in life that is very suitable for raising flowers. Because it has particularly good air permeability in drainage.

The roots of the flowers also have a good regulating effect, and the material of this good flower is cinders. Growing flowers with it definitely has great results. It can play a good role in regulating many flower problems, such as yellow leaves and rotten roots.

Because it is more transparent overall, Huayou can give it a try. Indeed, it can be a good regulator for both flowers and flowers.

Many pot friends use cinders according to the wrong demonstration when using cinders. This will also have a great impact on the flowers, there will be some problems with the roots of the flowers, and there are actually alkaline substances in the cinders, which will have some damage to the growth of the flowers. When using cinders, they should be soaked and broken after soaking, and it is best to treat them with physical fitness.

In this way, it is best to filter out the cinder fragments that are not suitable for the main and make it more uniform. Flower lovers can then put them in clean water and rinse them, soak them well and dry them in the sun. This was done to better obtain the effect of the antimicrobial vaccine, and it did not play a bad role, and basically the coal ash was made.

Cinder does have a lot of effects and effects on flowers, and it is also a very useful type of fertilizer, which can supplement nutrients to many flowers and make flowers grow faster, while some flowers can be put into flowers and plants for use. This enhances the air permeability of the loose flowers and avoids spoilage and other problems at the roots of the flowers. Coal ash also has substances that can provide nutrients.

Not only can it be mixed in the Chinese soil, but the Huayu can also be spread on the bottom of the flower pot, like ceramics and pine needles, which have the same effect, which can improve the drainage and air permeability of flowers and help the growth of flower roots.

Many people use the wrong way to plant cinders, and one of the points is that they don't soak enough when making cinders for the first time. This is very wrong. This is because the alkaline components in the soot will affect the fire soil and flowers, and direct use will also burn the flowers, so soak them well with water.

Because the time can be about a day.

First of all, at this time we can put the burned cinders aside, then add a small amount of salt water, then put it in the sun to dry, and then add a small amount of soil, and it is done.

Cinder to make flower soil into small pieces, directly mixed into the flower soil, cinder can make the soil more permeable, breathable, so that the soil does not connect to the board.

Put the burned cinders at the bottom of the pot, sprinkle one layer and then a layer of fertilizer, and finally sprinkle a layer of fine soil, a layer of cinders, a layer of fertilizer, and a layer of fine soil, so that the plant can grow strongly.

Honeycomb cinder can play a good role: when used as flower soil, it can not only increase the porosity and air permeability of the soil, but also contain trace elements in the honeycomb cinder, and the root system of the plant can grow stronger after absorption; It can be broken and then soaked, and it can be used after soaking for a week.

To crush the honeycomb cinders, soak them in water for two days. After drying thoroughly, sieve through a sieve, keeping the kernel-sized pellets of corn. Place the clamps on the bottom of the cloth and put in the nutrient soil for watering. To choose the right plant for planting, do not choose a thicker root system.

I think it is enough to break it up and mix it into the soil, and pay attention to the amount not to be too much, otherwise it will lead to poor soil.

Honeycomb coal, many rural or roadside breakfast shops have, if you don't feel shy, you can go to the roadside breakfast shop to ask, anyway, they are also thrown away as garbage, I sometimes go to the breakfast shop to ask people for it. However, when the honeycomb coal is broken, the dust is larger, and the burned honeycomb coal is used as flower soil to raise flowers, which is something that many flower masters have experimented with, and the effect is very good. Because honeycomb coal is fired at high temperatures.

There will be a lot of small holes in its residue, and the air permeability is very good, and honeycomb coal is really hard to find now, especially in recent years, when the country controls smog, and many places are not allowed to burn coal. However, some remote places, or a breakfast stall can still be found, and Dawn picked up some a few days ago.

There are many flower friends who directly use pure cinder to grow succulents, which has reached a very good state. Therefore, cinder is a rare substrate for raising flowers. So, what kind of treatment does the honeycomb cinder need to go through, and the honeycomb coal after burning can be used to mix soil and plant flowers, which is not a new thing, and it also makes many gardening shop owners see business opportunities.

In fact, you don't have to spend money, let the breakfast shop that is often consumed As a person who has been using cinder + peat soil + granular stone to grow succulents, let me answer this question simply. What do I need to pay attention to when using burned honeycomb cinders to make flower soil? First of all, it should be noted that it cannot be used directly, and after burning, it needs to be put aside to cool thoroughly, and then put it in a basin or container, mainly because it needs to be poured with water for soaking, and wait for two or three days to take it out to dry.

Honeycomb cinder needs to pay attention to things, some places of coal, contains more sulfur, it is best to soak in water for a few days before use. Cinders are generally neutral, but also weakly alkaline, and acid-loving flowers generally need to adjust their pH. Honeycomb cinders should be difficult to collect now, especially in the cities.

Honeycomb coal, in fact, is processed coal, which is mainly composed of carbon, hydrogen, oxygen, nitrogen, sulfur, silicon, calcium and other components. Burners that grow after combustion contain silica, calcium oxide, iron oxide, and more.

You can make flower soil, you need to thoroughly grind cinders into powder, and you need to mix some other soil to make flower soil, pastoral soil, sand and so on to mix it will have a better effect.

Of course, it can be used as flower soil, and it is also very easy to use, because after adding cinder, it will become loose and breathable, and as for the use item, it only needs to be smashed into pieces to mix into the soil.

After honeycomb coal is fired at high temperatures. There will be many small holes in its residue, the air permeability is very good, and after high temperature firing, there are no germs in it. Make it into kernel-sized pellets.

It can play the role of water permeability and breathability. And its small pores are also able to absorb some nutrients. Soak the honeycomb cinder first and then crush it, if the size of the container can't put too large pieces of honeycomb cinder, you can crush and soak it again, basically soak for a week before you can use it.

Absolutely. First take out the cinders, then spread a layer around the flower, you can provide nutrients, and then watering can better keep warm, and then the flower grows better.

After being placed for a period of time, it is processed with a hammer and crushed into a crushed shape, and it is necessary to pay attention to it, not to put too much, otherwise it will not have an effect.

First of all, they have some residual sulfide after combustion, and at this time, they need to be crushed and left in the air to dry for more than a week. Then you can mix some soil or some weeds into the pot. Be sure to pay attention to the amount of weeds and the amount of soil must be small.

Mix it evenly with the soil in the pot, and stay away from the roots of the flowers, not too much, and mix it in a ratio of 2:1 between soil and cinder.

Honeycomb coal flowers must be soaked in water for a few days, and then the particles should be made smaller, and not too much.

Flowers that need strong water retention should not be made of cinder.

With the improvement of people's living standards, more and more people like to raise some flowers and plants at home, and granular soil is one of the most popular particles with high content accompanying soil, and cinder is the most common granular soil, cinder is a very good material for raising flowers. Cinder is also called slag, pick the cinder that is completely burned through, after soaking, sieve off the dust that is too fine, as a succulent cultivation medium is good, breathable and absorbent. Usually the soil where flowers are planted can be mixed with some parts, but not all of them can be raised with cinders.

Slag is a material adapted to most flowers. Although the cinder of honeycomb coal can be used to raise flowers, it is not recommended to use it directly or all of it, it must be treated and screened before it can be used, and it is possible to use cinder as a drainage medium with other media, and it is not advisable to use cinder completely.

How to grow flowers with cinders?

Raise flowers in the family, we plant it in pots, many flower friends will choose to use granular soil to cultivate, granular soil we can see everywhere in the family, cinder is a very good choice, such as our common honeycomb coal, it is a very good medium for raising flowers with soil, generally we buy desert rose cactus balls from the south, they are all cultivated with stupid cinder, and the old traces are also used to raise cinder balls in the flower shed, and some will be mixed every time they plant flowers.

Generally, soak for about a week, change the water once every three days, the cinder is not broken and used directly, it needs to be used after treatment. To sieve out the dust and debris, we can choose the different sizes of sieve holes we need according to our own needs, so as to obtain particles of different diameters. After the honeycomb cinder is brought, put it in the basin and soak it in water, and try to break it to about 1 cm of particles.

OK. It needs to be treated before it can be used, and the soil needs of different flower plants are different, and the size of cinder particles needs to be determined according to the growth habit of the maintenance plants. The cinders need to be crushed first, and then the powder is filtered out with a filter tool such as a sieve.

Choose the right size cinder for use, after the selection, you need to soak it in clean water for a few days, put it in a sunny location to expose it, which can effectively remove harmful substances, and then you can mix it with the soil to raise flowers.

Substrate selection method for flower cultivation3. Precautions: Before preparing the soil for planting, it needs to be sterilized before it can be used, there are many ways to sterilize, you can spray the soil with potassium permanganate solution, you can also put the prepared substrate in the sun for two days, and you can also use boiling water for brewing. It is recommended to change the potting soil every 1-2 years to avoid soil compaction affecting the growth of plants.

Cinder is good for flowers, do you know how to use it.

Min Qi 1, after the coal has been used, the remaining cinder is a whole piece, we can't directly use the whole cinder to plant flowers, so we need to use tools to crush the whole cinder.

2. We have to prepare a sieve, the first step is that we have crushed the cinder socks, and now you can directly put the cinder in the sieve, and the result will screen out a lot of granules of different sizes, if you feel that the first sieve is not careful, you can sieve several times, and finally get the cinder, these granular cinders are the key to planting flowers.

3. Put the cinder after the sieving above into a container and pour water to soak. When pouring the water, just over the cinders.

4. This step is the key to the whole process, we need to find a sieve with a diameter of millimeters to screen cinders in water, why in water? Because there is no interference of dust in the water, we use a millimeter sieve to screen out the cinders and put them in another container, and then we need to find a sieve with a smaller diameter, about 1 mm is OK, and screen again, this time we must screen out the cinders with smaller particles and put them in another container for preservation, and then, look for a smaller diameter of a good sieve again for screening, and select a smaller cinder to put in another container. The remaining cinders are useless and can be directly discarded.

5. Soak the cinders of different diameters sorted out in the previous step in their respective containers, and then dry them in the sun for later use.

Burned cinders can be used to grow flowers, but not directly, and the roots of flowers can be harmed by the burnt cinders, so they need to be fully treated before they can be used to grow flowers. There are many benefits to planting flowers with treated cinders, which can increase the thermal insulation effect and moisturizing effect of the flower soil, and can also increase the air permeability and water permeability effect of the soil, and prevent the lack of rotten roots of the flower type.

Can you plant flowers after burning cinders.

Burned cinders can be used to grow flowers, but not directly, and the roots of flowers can be harmed by the burnt cinders, so they need to be fully treated before they can be used to grow flowers.

There are many benefits to planting flowers with treated cinders, which can increase the thermal insulation and moisturizing effect of the flower soil, and can also increase the air permeability and water permeability of the soil, prevent the flowers from rotting their roots, and make the growth of the flowers better.

The key points of planting flowers after burning cinders are suitable for planting what flowers are suitable for planting after burning.

The burned cinders can be used to grow flowers such as spider plants, tiger pill orchids, and yueji.

Burnt cinder planting method.

If you want to plant flowers after burning cinders, you need to soak it for about seven days, during which you need to change the water more than three times, so that you can remove the impurities in it, and you can also clean it, and the cinders after soaking will become weakly acidic, and then mix it with the soil in a certain proportion to plant flowers, or cover it with the soil of flowers, both of which can be.

Precautions for planting flowers after burning cinders.

When planting flowers with burned cinders, we must pay attention not to use it directly to plant flowers, and you cannot directly plant Huihua without soaking it.