The best home remedies for electric welding to hit the eyes, a simple way to hurt the eyes by electr

To see the best home remedies, jump directly to the 7th small point of the second largest point and take a look; If you have time, it is recommended to read them one by one;

The arc light of electric welding is harmful to the human eye, so it will not be emphasized here; You've experienced it all;

After the human eye is damaged by arc welding:

It will burn in the early stage and itch in the later stage;

At this time, try to protect the eye area and face**, do not rub and pat with your hands, and do not cause damage to the leather clothing, so as not to cause infection;

And, don't participate in the welding work anymore at present, so as not to cause secondary burns; I'll talk about it when it's all right;

In terms of diet, eat more fruits and vegetables that make vitamin C;

And then there's the leather apparel aspect:

It can be applied with a cool ointment such as aloe vera;

Of course, for the ** part, some people have used Jing Wanhong to smear the wound to treat and relieve;

In the arc of electric welding, it involves the eye area, especially the eyeball part:

Fresh human milk can be used to apply dripping;

It can also be used if human milk is difficult to find"Cod liver oil", the effect is also good;

However, this is just some of the therapeutic treatments that should be done for minor eye burns;

If it has caused serious burns, it is better to go to the hospital as soon as possible.

When an individual operates electric welding, the personal safety and health of themselves and others are still worth paying attention to; Many occasions to be welded are complicated; Welders must pay attention to:

Do a good job of power supply inspection to prevent electric shock;

Work at height should pay more attention to personal accidents.

Pay attention to fire prevention; Pay attention to wearing anti-tools and clothing to protect your safety and health;

The welding site should be prompted and cared for, and non-professionals (especially children) are not recommended to be too close to the welding site; Wait a minute.

What should I do if my eyes hurt very much after being welded?

Hello dear, this is what I found, you can take a look.

It is not recommended that you use home remedies when welding and drilling holes**, because the home remedies used are not based on science, and random use may lead to aggravation of symptoms, you can first use the method of saline eye drops**, if you find inflammation, you can use anti-inflammatory eye drops**.

It is not recommended that you use home remedies when welding and drilling holes**, because the home remedies used are not based on science, and random use may lead to aggravation of symptoms, you can first use the method of saline eye drops**, if you find inflammation, you can use anti-inflammatory eye drops**.

Home remedies--- please skip over to the 4th point in point 2;

For those who have already caused welding arc burns to the eyeballs, in general:

First of all, don't participate in the welding work anymore, so as not to cause secondary burns; I'll talk about it when it's all right;

Second, do not touch it with your hands, so as not to aggravate the condition and feel complicated;

In terms of diet, eat more fruits and vegetables that make vitamin C;

When it comes to the eyes, especially the eyeballs, it can be used"Fresh human milk"Drip wipe; It is also available if it is difficult to find"Cod liver oil", the effect is also good;

Alas, the operation of electric welding, personal safety and health should still be paid attention to; Many occasions to be welded are complicated;

Do a good job of power supply inspection to prevent electric shock;

Work at height should pay more attention to personal accidents.

Attention should be paid to fire prevention during the welding process;

Pay attention to wearing anti-tool clothing; Wait a minute.

Be sure to wear goggles in electric welding, as long as you wear goggles, you can greatly reduce the damage.

It's not difficult to protect your eyes, it's not difficult to protect your **, it's not even difficult to protect your lungs, and the rarest thing is waist, waist, waist. I have done electric welding and know that I often have to change the angle, so it is impossible to have a stool for you to sit on at any time, and the waist will become more and more sore, and then it hurts, I have done it for 11 years, and the lumbar muscle strain is very serious, mainly on the construction site.

1. Welders must wear welding masks to protect their eyes when working.

2. Welders must wear filters to protect their eyes when working.

3. Welders must wear protective clothing when working.

Polyvinyl alcohol eye drops can alleviate it, I have been burning electric welding for more than ten years, and the first drop of my eye has never hurt after every work.

Welding eye, the medical term is called: electro-optic ophthalmia. It is a symptom of damage to human eyesight caused by strong arc light from welding.

At present, human milk eye drops are more commonly used** eye punching is best put away.

Human milk drops on the eyes, 1 2 drops each time, 3 5 minutes once a drop, ** the sooner the effect, the better.

When welding, wear protective goggles or a mask to protect your eyes and avoid eye damage. If you are unfortunate enough to have uncomfortable eyes, you can relieve the pain with cold compresses, you can drop eye drops, be careful not to rub your eyes, and wear sunglasses when you go out.

Welding is a technology that hurts the eyes, and to protect the eyes during the welding process, it is necessary to wear a welding mask or filter to protect the eyes.

The mask must not have cracks, and it is best to use a welded mask made of fiberglass or nylon.

It is best to add a protective plate to the filter.

What kind of human milk is bullshit, cold medicine plus painkillers definitely work, or some anesthetic.

If you don't lose your sight at the time of welding burns (you have to go to the hospital if you are blind at that time), it is not a big problem, first of all, when the eye has not yet felt symptoms, you should drop eye drops to repair the cornea of the eye, such as Bei Fushu. After work, use a cold compress with a wet towel with ice water (to the extent that the towel does not drip water) and wake up fine.

In the case of not being able to get human milk, go to the pharmacy to buy a small bag of disease powder, get a little (about 5 ml) of warm boiled water, stick a little bit with chopsticks, put it in warm water, mix it thoroughly, and drop it into the eye, it will be effective immediately, and the pain will disappear.

You can eat two pieces of analgin, you can close your eyes first when you just flash, and then open them after the white spots in your eyes disappear, it will be much better

In life, we will often walk through the construction of the building place, many people will accidentally be welded to the eyes, particularly uncomfortable, the following will teach you a few tips, is the most effective way to weld the eyes. 1 First: Use fresh human milk, if there are lactating women around, you can take a few drops of human milk and drop it on the eyes, this is the most effective method

The home remedies that electric welding hit the eyes, that is, it is good to find someone once or twice.

Knowing that your eyes have been hit by electric welding, take painkillers before your eyes hurt, don't wait for the pain to hurt, and it won't work if you eat it Quack is a good thing.

An excellent home remedy for electric welding to hit the eyes! You see such an answer is your blessing from rest, pour 80-90 degrees of boiled water into a normal caliber water cup, put the injured eye above the mouth of the water cup and steam for about 20 minutes, try to get close to the best distance without burning your eyes, try to block the steam with your hands to see the eyes evaporate, keep your eyes open as much as possible and move around for four times, 20 minutes will be effective immediately, steam twice in the morning and evening, and heal in two days.

The home remedies for electric welding are really needed.

1. Drip breast milk.

If you feel eye pain after being welded, you can collect breast milk eye drops, and use breast milk eye drops to relieve pain, which is mainly due to the high content of nutrients in breast milk, and breast milk has the effect of clearing heat and reducing inflammation, but it should be noted that only mild pain can take measures to drop breast milk.

2. Apply a cold towel.

If the pain is not particularly severe, you can use a cold towel to wet the eyes, so that the pain in the eyes can be reduced repeatedly, or if the towel is not cold enough, you can add some ice cubes to the towel, which can have a better effect.

3. Soak your eyes in cold water.

After being welded, you can use a basin of clean cold water and soak your eyes in cold water, at this time, you should force yourself to open your eyes, and after soaking for another 10 minutes, you can relieve the pain in your eyes.

Fourth, use raw egg whites.

If the pain is only mild, you can use eggs at home, apply egg whites to your eyes for a few minutes, and you can feel a significant improvement in eye pain.

5. Eye drops.

If the above methods have no effect, you need to go to the pharmacy to buy eye drops for eye drops, to choose some anti-inflammatory eye drops, only anti-inflammatory eye drops can make the inflammation of the eye disappear, thereby relieving the pain, but it should be noted that eye drops and breast milk can not be dropped into the eye at the same time, and the indrip into the eye at the same time will cause a reaction to make the inflammation more serious.

6. Seek medical attention in a timely manner.

If the eye pain is severe and there is redness and swelling, it is necessary to seek medical attention in time, as long as the doctor can check and judge in time, so as to take relevant measures**. Depending on the condition of the eye, the doctor will perform an eye wash to help relieve pain and avoid worsening inflammation.

What should I do if the welding arc hits my eyes? This is a quick way to relieve pain, what other good ways do you have?

If you feel that your eyes are hitting, go to bed in advance, do more eye massage before going to bed, and then use a hot towel to warm your eyes, which can reduce the pain when your eyes are noisy at night. When your eyes hurt at night, use a cold towel to cool the compress. May reduce pain.

When I first started learning electric welding, I also often drilled holes, and accidentally the welding rod touched the ground wire, and the arc ignited.

Talk about how I prevent eye punching, and wear sunglasses at all times when doing dry welding, which can effectively prevent eye punching. Even if the welding torch is accidentally ignited, it can also be prevented.

When the welder is finished or resting, remove the unfinished welding rod from the welding tong to prevent the welding rod from hitting the base metal and arcing.

When welding, see if the mask leaks light, I generally use sealant to seal the mask around the mask to prevent light leakage and holes.

The smoke generated during welding can also hurt the eyes, so try to stay away from the weld when welding.