The balcony made a fish pond, pasted tiles, what should I do if I test the water and find a leak?

If there is a water leakage problem, check what is the cause of the water leakage?

The specific practice of the balcony fish pond There are generally two ways to make a fish pond on the balcony. These two practices are also the most popular at this stage, and I will tell you about them one by one.

The first way to make a fish pond on a balcony was to use bricks. That is, directly take bricks to build a wall, and then build a square or rectangular pool; The surface layer is waterproofed, plastered, tiled, and later served as a fish pond and placed on the balcony.

The second specific way to make a fish pond on the balcony is concrete. This practice is to support the formwork on the balcony first, and then start pouring concrete, and finally remove the formwork to appear the appearance of the fish pond we need. The surface layer is also waterproof, plastered, and tiled.

Personally, there is a question to be said here. Since balconies are cantilevered structures, they are limited in terms of force. Therefore, I personally suggest that it is best not to make a fish pond on the balcony, whether it is a brick structure or a concrete structure.

Because the fish pond itself is coupled with the water in the fish pond, the weight is very high, and it will cause the balcony board to crack over time.

After tiling the surface of the fish pond, the water was tested and it was found that there was a leak. At this time, I personally think that there are two ways to deal with it, one is the most thorough way to deal with it, and the other is a relatively simple way to deal with it.

The most thorough treatment for leakage in fish ponds. In fact, you may not agree with my point of view when you say this method. Because this method needs to smash all the tiles that need to be pasted, and then redo the waterproofing, do the closed water test after the waterproofing, and start to paste the tiles after passing the test.

A simple way to deal with the leakage of the fish pond after the tiles are pasted. This treatment method is to use a waterproof performance of the tile itself. At this time, we found that there was a leak after the fish pond was tiled, and we only needed to treat the brick joints of the tiles.

Personally, I recommend that you use the kind of weather-resistant silicone structural sealant that is used outdoors to treat the gaps in the tiles. First of all, clean the tile gaps, and then use structural adhesive to fill the tile gaps tightly. After this treatment, there is basically no water leakage.

If there are pipes nearby and the pipes are underground, it is advisable to break down the balcony tiles to find the location of the water seepage. Balcony tile joint seepage can not be without a source, the best solution is to go to the source, to solve it completely at one time, can not wait, the problem is big, water leakage downstairs will be troublesome.

Since your home is a fish pond leakage, I suggest that it is best to knock off the tiles and redo the waterproofing, because all the current materials and processes can not solve the problem of not knocking the tiles and stopping the leakage for a long time. In addition, the fish pond must be stored for a long time, and the requirements for waterproofing must be higher. For a long-term and effective solution, it is better to knock off the tiles and do it again.

Otherwise, the money spent on repeated repairs is enough to re-do the waterproofing, and it is better to solve the problem once and for all.

The first way is to smash all the tiles and re-lay them; The second is to reinforce and waterproof the brick joints of the tiles at the leakage to plug the leaking gaps, but this method is not used for a long time.

If the fish farm finds a leak after applying tiles, we only need to deal with the brick joints of the tiles. It is advisable to treat the crevices of the tiles with a weather-resistant silicone structural sealant used in the field. Clean up the tile gaps first, and then fill the tile gaps with structural adhesive.

After this treatment, there is basically no water leakage. Specific standard practices for fish farmsAfter we have completed the structure of the fish farm, we should do the first waterproofing at this time. Waterproofing materials can be polymer waterproofing coatings or polyurethane waterproofing coatings.

Specific paint brush method: Wipe all corners first, wipe three times in advance. Then, wipe the large cotton at least three times.

After brushing, carry out a closed test, the water level should be the highest position of the swimming pool, wait 24 hours to see the situation, if you enter the closed water, the wall, plaster, and finally pull the tiles.

Adding adhesives will only solve the problem in the short term, not in the long term. And the tiles of the fish pond are already pasted, and it is difficult to find the leakage. Unless the entire fish pond is injected with adhesive, it can no longer leak in the later stage.

Therefore, the path of injecting adhesive is not feasible, but it can also be solved by customizing glass fish tanks or laying tarps, but these measures are palliative. To solve the root cause, first find the leak in the fish pond, but pat the pasted tiles.

But if the owner wants to build a fishing ground on the balcony, waterproofing construction is very important. Wastewater tests must be carried out and are more rigorous than toilets. Fisheries always store water, so it's okay to not just be waterproof twice.

The wastewater test also takes 48 hours. Once a water leak is found, it should be remedied in time, and do not wait until the tiles are all pasted. Please note that it is not possible to waterproof directly on the tiles.

One is that it will affect the decorative effect, and the other is that the tile is too smooth, and the waterproof material is not well bonded, so in order to save **, do not directly waterproof on the tile. Otherwise, it will be a waste of effort and money.

The waterproof quality must be passed. Once there is a water leak in the later stage, the tile should be finished with a waterproof method. Just pour in the water, and after a while your downstairs neighbors will come back to you.

If you buy directly from a nearby hardware store, you can generally use more glass glue, meteorite glue, structural glue, etc. Specific operation method: First of all, find the leaking place, dry the sink completely, and then apply it vigorously to make the glass glue penetrate into the leaking gap, instead of using glue to solve it.

Moreover, it should be wiped flat for 24 hours before it can continue to be used.

The waterproofing material can be polymer waterproofing coating or polyurethane waterproofing coating. Brush each corner three times; Then brush the large surface three times. After brushing, a closed water test is performed. After the sealing water is qualified, the wall is plastered with wool and then tiled.

Water leakage is more troublesome, first you need to find the source of the leak, find out if it is due to seepage leakage or broken leakage. If there is water leakage, the material is generally not good, and the material needs to be replaced and repaired. If it is damaged and leaking, it will be repaired.

You can ask the property for help, or you can go downstairs and ask a relevant repair team to come to your home to solve this matter, which can be repaired very professionally.

The best thing to do is to remove everything from the balcony. Then do a new layer of waterproofing and you can solve the problem.

I think that if the fish pond on the balcony is found to be leaking after tiling, we can use some super glue on the market to glue the leaky place, or we can brush the cement again.

In order to be able to use it for a long time, it is recommended to apply a waterproof layer on the surface of the tile to strengthen the waterproof effect, and then re-paste the tile, so that it is once and for all.

You can apply some waterproof oil to the fish pond, of course, the fish pond should not be too big, otherwise the cost will be too high.

After the fish pond is tiled, it is found that it is leaking, how to remedy it? the specific method of the pool; There are generally two ways to make a pool. These methods are the most popular at this stage, and I will give you a look at these methods below.

The first way to make a pool was to use bricks. In fact, it is to immediately take bricks and build a wall, and then build some square or square pools to be used as fish ponds. The specific method of the second type of pool is concrete.

This kind of practice is to support the formwork first, and then start pouring concrete, and finally remove the formwork to appear what we should look like a fish pond.

How to deal with water leakage after the fish pond is pasted with floor tiles; After the floor tiles were applied to the entire surface of the fish pond, the water was then opened and it was found that there was a water leak. The use of floor tiles themselves has a waterproof property. It was found that there was water seepage after the fish pond was pasted with floor tiles, so everyone only needed to solve the bottom of the wall of the floor tiles.

It is proposed that everyone can use outdoor weather-resistant silicon copper structural sealant to solve the gap of floor tiles. Clean the tile gaps first, and then fill the tile gaps with weather-resistant glue and beat them tightly. After that, most of them will not seep water.

How to prevent water seepage after the fish pond is tiled with floor tiles; A standard manufacturing method of the details of the fish pond. After people have carried out the construction of the fish pond, it is time to do the first time to prevent moisture. The raw materials for waterproofing can be made of polymer waterproofing materials, and polyurethane coatings and architectural coatings can also be used.

The actual way to brush latex paint: brush every corner position first, and brush it three times in advance; Then put a lot on top of the brush at least three times. After brushing, do the irrigation test, the water line must be the highest level of the reservoir, and then wait for 24 hours to watch the situation, if the irrigation test is up to standard, carry out the calendering of the wall, batch putty, and finally paste the wall tiles.

The specific method of making a fish pond on the balcony There are generally two ways to make a pool on the balcony. These methods are the most popular at this stage, and I will give you a look at them one by one. The first way to make a pool on a balcony was to use bricks.

In fact, it is to immediately build a brick wall, and then build some square or square pools as fish ponds and put them on the living balcony.

This is that it is necessary to add more cement, which will not leak, because the cement is very waterproof.

In the process of installing the fish pond, this situation should be remedied in time, and the tiles in the leaking place should be removed to find the leakage and repaired.

Then you can remove all the tiles, and then waterproof the fish pond, so that you can see the situation to prevent water leakage.

Personally, I think there are two methods, one is the most thorough and the other is simpler.

Back to the first method, the most thorough treatment of aquarium leakage. In fact, if this approach is mentioned, probably everyone disagrees with me.

Because this method requires all the tiles to be broken and then waterproofed. After the waterproofing is completed, a closed water test is carried out, and only after passing the test can the tiles be pasted. Simple treatment of water leakage after tiling of aquaculture ponds, this treatment method takes advantage of the waterproof properties of the tiles themselves.

At this time, we found that the tiles were leaking after sticking to the aquarium. We only need to deal with the joints of the tiles. Personally, I would recommend that you use an outdoor general purpose weather-resistant silicone structural sealant to deal with cracks in your tiles.

First clean the tile gaps, and then fill the tile gaps with structural adhesive After such treatment, there is basically no water leakage, here is a specific standard practice involving fish ponds.

Let's give you a detailed introduction, when we finish the structure of the fish pond, we need to do the first waterproofing at this time. The waterproofing material can be a polymer waterproofing coating or a polyurethane waterproofing coating. Specific painting method:

Brush each corner first, first three times; Then brush the large surface at least three times. After brushing, perform a closed water test. After the sealing water is qualified, the wall is plastered with wool and then tiled.

Here we need to pay attention to a few key issues: the first is to strengthen the treatment of all corners, and the second is to pay attention to at least three times. The third thing to note is to do a closed water experiment after the painting is completed.

The material of the fish pond is very particular, the material can be replaced, and the concrete can be used to rebuild one.

You can find the leak first and then replace a tile.

You should first find the leak and then plug it with a special tool.

Find the leak and see if the leak is particularly serious, if it is serious, it is recommended to do it again to waterproof.

Find out the source of the leak, and then fix it with the right medicine, and you should be fine.

If there is a water leak, you need to find the leak and fill it with cement.

Turn off the water switch first to see if there is a leak between the tiles, if so, just change it.

This solves the problem, it really can't be done, use styrofoam to stick a layer on the outside.

Check first to see if there is a problem, and then repair the problematic place.

Then only the tile is warped and re-brushed with the waterproof layer, otherwise the leakage will become more and more serious.

It is best to check the ** water leakage, repair it and then continue to use it, otherwise it will be too wasteful of water.

Then just change the tile, change the waterproof, change the good one.

If the fish pond is found to be leaking, put the water out first to see if there is a problem.

It's best to upload** Let's see what it looks like and then analyze whether it's a problem with decoration materials or where.

Carefully check that it is a water leak, and then repair it in time.