How to make a fish pond on the balcony?

A balcony at the end of the good end, why do you make a fish pond? Of course, this is a personal preference, and I have no right to interfere! Let's talk about how to deal with the leakage of this fish pond?

Building a fish pond on the balcony and building a bathtub in the bathroom are basically the same workflow, and then the tiles are pasted after the bricks are built, and the leaks need to be repaired before being done, and then the tiles are being pasted. It is recommended to use polymer cement-based waterproofing for waterproofing materials, and ask a professional master to carry out the construction. After waterproofing construction, it requires a 24-hour curing period and is covered with plastic film.

Since everyone has this kind of idea, do fish pond fish farming on the balcony, and there will be all kinds of problems when there are more people, for example, today this friend is sitting on the balcony with fish pond bricks are pasted, but found that the water is leaking, so how to solve this problem? So my husband used the remaining bricks to build a rockery fish pond on the balcony, my husband saw that I like to raise fish, so he joked that he wanted to contract a fish pond with friends to raise fish, but I didn't expect to wait to visit the new house, I was surprised to see the balcony! It turned out that my husband built a fish pond on the balcony, which really made me cry and laugh!

<> but when building a pond on the balcony to raise fish, it is a more important thing to prevent leakage, or not only can it not be raised well, but it can also affect the overall safety of the house due to fish leakage. Tested the water and found a water leak. And the construction master said that glue, this is just a make-up after the fact, remedial measures, a look at this master is the construction of the picture to save trouble, problems to make up for the sheep.

Irresponsible, to put it bluntly, glue injection can solve the problem in the short term, but it is not advisable in the long run.

There are also large-scale aquaculture and waterscape projects in use. According to the seller's boast, it has the functions of non-toxic, tasteless, environmentally friendly, long service life, good ductility, and preventing plant roots from piercing. It is strange that there is such a good material, but few people in the country use it to make ponds.

After making a layer of cement protective layer, then lay bricks on it, the pool must be made of good powder and cement must be made another layer of waterproofing, and then you can paste the tiles, so that there will be basically no leakage, if there is leakage, the tiles will be smashed from the new powder cement to do waterproof and then tiled, do not use polypropylene for waterproofing, the corners are easy to leak.

Re-stack the ground, knock off all the tiles, grind them all into cement, very tight, and then lay beautiful tiles on the inside again, so that the waterproofness is good.

We should make something drier, not wet, and we should also buy a waterproof material, so that's it.

The waterproof material of the fish pond should be non-toxic, environmentally friendly and odorless, and it can adapt to the small construction area of the pool. Among the waterproofing materials, polymer cement-based waterproofing slurry (general-purpose waterproofing slurry, flexible waterproofing slurry) is the preferred material for waterproofing of fish ponds.

The fish pond on the balcony is to store water for a long time, so before doing waterproofing, we must first understand and choose waterproof materials, common waterproof materials are polymer cement, polyurethane and waterproof membranes. However, it is not recommended for the owner to use waterproof membrane, because the fish pond will have yin and yang angles, if the waterproof membrane is used, it is not easy to cut and paste in the construction, and the fish pond is waterproof, it is not recommended to use the waterproof membrane, because the pool will have yin and yang angles, water outlets and other places, it is not easy to cut and paste the waterproof membrane to do waterproofing, and the construction technical requirements for workers are relatively high.

The fish pond is waterproof, it is not recommended to use waterproof membrane, because the pool will have yin and yang angles, outlets and other places, the use of waterproof membrane is not easy to cut and paste, and the construction technical requirements for workers are relatively high, if the construction is not standard, it is likely to affect the final waterproof effect. Moreover, the waterproofing membrane will have a certain pungent odor relatively speaking, which is not environmentally friendly enough and may affect the water quality and the growth of fish.

When doing waterproofing in the fish pond, do the waterproof layer in the middle, it is recommended to use JS polymer cement-based or polyurethane waterproof coating, paint the paint ratio 3 4 times, when brushing, you should wait until the previous time to dry into a film and then paint the next time, the thickness of each time is 3 4mm, remember that you can't build on the open water, nor can you paint it on a rainy day, and then apply the surface coating after the waterproof layer is done, which is beautiful and space-saving, and you don't need to change the water all year round, saving time and effort.

This is a careful **, when it was built, I didn't think it would be very heavy, but some professionals pointed out that the general balcony design load is 250kg per square meter. Then in the case of a water depth of 15 cm, plus an area without water, the average should be less than 150kg per level. Fish pond is divided into cement pond and tile pool, if the cement pond can be pasted on the side of the pond stone spring and other beautifying fish pond materials, but the cement pond is expensive and troublesome (just a personal point of view, especially in the balcony of the commercial house is really not good).

In fact, some waterproof materials can be used, and this fish pond can also be made with a layer of plastic bags or plastic paper on the outside to achieve a waterproof effect.

We should coat all the floors of the balcony with waterproofing, and we must keep a height of about 3 cm or 5 cm, and we must make a floor drain so that there will be no leakage in the later stage.

I think when building a fish pond, we should do a few more layers of waterproofing, so that we can achieve the desired effect.

1。Surface treatment: remove anti-alkali, dust, paint, surface loose layer and other foreign substances, and the surface should be slightly rougher;

2。Wet concrete: Thoroughly wet the concrete surface with a clean and thorough coating to ensure crystal formation;

3。Preparation of coating mortar: mix powder and water into a uniform slurry in the ratio of 1:;

4。Brushing: scraping with a scraper or special spray equipment, the coating is brushed twice, after the first coating is basically hardened, the second coating is done, and the reference amount per square meter is as follows: , depending on the construction site and the base surface;

5。Maintenance: The full curing of the coating should be ensured, and it should be covered with a damp burlap in time after the coating is applied to ensure that the coating is wet. After the coating is hardened, it can be cured with spray and covered with burlap, which must be cured for 72 hours;

6。This product can also be used as a waterproofing agent in mortar and concrete according to the external mixing method, and the dosage is 2 3% of the weight of cement.

7。For the newly poured concrete, because of its high moisture content, it can be directly sprinkled with dry powder on the base surface for waterproofing.

Test the water. The water test can only be carried out after the coating is completely dry, usually drying for 7-10 days in a climate with humidity less than 80%, and the surface of the coating can be stored after a certain hydrophobic effect.

The waterproofing treatment of fish ponds can generally be done in the following ways:

1.Use waterproof coatings: First of all, coating waterproof coatings on the inner and outer surfaces of the fish pond can effectively prevent the penetration of water and protect the fish pond from water damage.

2.Use waterproof felt: Place waterproof felts on the inside and outside surfaces of the fish pond to prevent water from seeping into the fish pond and protect it from water damage.

3.Use anti-cement slurry: Applying anti-cement slurry on the inner and outer surfaces of the fish pond can effectively prevent water penetration and protect the fish pond from damage caused by the water.

4.Use a layer of caulk: Filling the inner and outer surfaces of the fish pond with a layer of caulk can effectively prevent water penetration and protect the fish pond from water damage.

1. First build the fish pond, and then the cement mortar in the fish pond is plastered and leveled, and the slope is found. If it is a fish pond that has been built, clean the interior and check whether the plastering layer has cracking, hollowing, sanding and other phenomena.

2. Generally, the outdoor small fish pond is waterproof, and the construction can be done with rigid waterproof mortar. Stir the rigid waterproof mortar evenly, directly brush the cement mortar in the fish pond to wipe the dust, paint it horizontally and vertically with a brush, paint the oak first, wait for it to dry, and paint it again, and at the same time make the corners of the arc chamfering, and make a waterproof additional layer at the floor drain. The last pass is to use the method of roller coating to carry out the roller brush, mainly to brush the wall, which is convenient for subsequent tiling.

3. Polymer membrane waterproofing, rigid waterproof coating is painted on the cement mortar base, if the water-type sock mud mortar base cracks and falls off, it will directly lead to waterproof cracking. The waterproofing of polymer membrane is better in crack resistance. Before waterproofing construction, keep the base clean and tidy, then lay the membrane on the cement mortar, lay the waterproofing membrane with adhesive, and use polyurethane waterproofing treatment at the joints.

In addition, before making a fish pond on the balcony, the balcony as a whole needs to be waterproof, make a floor drain, or lay an impermeable membrane to avoid water leakage. Or in the waterproof construction of the fish pond integrated construction. After completion, the closed water test is done as a whole, generally for 48 hours, and then observe whether there is water leakage.

4. The best way is to weld a fish pond with steel, and then install it directly on the balcony, or weld it with steel on the balcony and paint it with better anti-rust paint. Then the inner wall of the fish pond is thinly built with red bricks, and it is decorated with tiles. This kind of steel structure, do a good job of rust prevention, generally will not leak.

The problem that is more likely to occur in the balcony fish pond is water leakage.

5. Balcony fish pond waterproof with environmentally friendly and non-toxic waterproof, if there are toxic and harmful substances in the waterproof, it will affect the later fish farming, or lead to the death of fish. The incumbent needs to consider the depth of the water, as well as the load-bearing floor of the house and the load-bearing balcony.