How can I make the sedimentation tank seep water quickly?

The sedimentation tank is generally used to precipitate sewage or chemical sewage, and the sedimentation tank can play a role in treatment! So how to improve the sedimentation effect of the sedimentation tank? Next, I will share with you the method of improving the sedimentation effect of the sedimentation tank, I hope it can help you!

Tools Raw materials.

Common sense of life. Method steps.

First of all, in order to improve the sedimentation effect of the sedimentation tank, the easiest way is to add enough sediment to the sedimentation tank, so that the sediment added to the sedimentation tank can be precipitated as quickly and optimally.

Please click Enter a description.

A sedimentation tank with a large enough capacity can also improve the sedimentation effect of the sedimentation tank. If the capacity of the sedimentation tank is not large, it will take more time for the sediment to settle down after the sediment is added.

Please click Enter a description.

In order to improve the sedimentation effect of the sedimentation tank, it is also very important not to stir the sedimentation tank during sedimentation. If you often stir the sedimentation tank when you are working in the sedimentation tank, it is basically difficult to degrade the sediment.

Please click Enter a description.

To improve the sedimentation effect of the sedimentation tank, if the time is not in a hurry, it is recommended that the longer the sedimentation time, the better, so that the sedimentation effect of the sedimentation tank can be better. This method is only suitable for sufficient time to settle.

Please click Enter a description.

In addition to the above-mentioned methods to improve the sedimentation tank, it is also a good idea to add substances that can cause chemical reactions with the sediment. A good sedimentation tank is also a very important method to use chemical reactions to improve the sedimentation effect.

Please click Enter a description.

It is recommended to filter the sediment while settling in the sedimentation tank, so that it will not accumulate too much, and too much accumulation is not conducive to the subsequent treatment of sediment, and it is easy to affect the sedimentation effect. The above is the introduction to improving the sedimentation effect of the sedimentation tank shared with you, I hope it can help you!

Please click Enter a description.

How can I make the sedimentation tank seep water quickly? I think that the way to quickly seep water is to let him filter it, clean, and carry out it in all aspects.

Hello, it is a pleasure to serve you and give you the following answers:1Reason:

The sedimentation tank is easily full due to the insufficient capacity of the sedimentation tank in the sewage treatment system. 2.Workaround:

1) Increase the capacity of the sedimentation tank: The problem of the sedimentation tank water is easy to fill can be solved by increasing the capacity of the sedimentation tank, but this method needs to cost a lot of money and takes a lot of time to complete. (2) Improve the operational efficiency of the sewage treatment system

The problem of easy filling of sedimentation tank water can be solved by improving the operation efficiency of the sewage treatment system, such as improving the control system of the sewage treatment system, improving the seepage and cracking preparation of the blind closed treatment system of the sewage cluster, and improving the operation and management of the sewage treatment system. 3.Steps:

1) First of all, a comprehensive inspection of the sewage treatment system should be carried out to determine whether the operating efficiency of the sewage treatment system meets the requirements. (2) Secondly, according to the inspection results, the control system, equipment and operation management of the sewage treatment system should be improved to improve the operation efficiency of the sewage treatment system. (3) Finally, the sewage treatment system should be inspected regularly to ensure that the operating efficiency of the sewage treatment system can be continuously improved.

4.Personal tip: The problem of a sedimentation tank filling up easily can be solved by increasing the capacity of the sedimentation tank or improving the operational efficiency of the sewage treatment system, but both methods require a lot of money and time.

Therefore, when implementing the sewage treatment system, the capacity of the sedimentation tank should be taken into account as much as possible to avoid the problem that the sedimentation tank is easy to fill.

BAI function of sedimentation tank: sedimentation tank is generally in DU

The structures of the sediment moisture separation before or after the biochemical process are mostly sludge with finer separation particles. Before biochemistry, it is called the primary sedimentation tank, and the sedimented sludge has more inorganic components, and the water content of the sludge is lower than that of the secondary sedimentation tank. The sedimentation tank located after biochemistry is generally called the secondary sedimentation tank, which is mostly organic sludge with high water content.

The plane of the sedimentation tank body is rectangular, the inlet is located at one end of the pool length, the submerged water inlet hole is generally adopted, and the water flows into the pool body by the inlet channel through the evenly distributed water inlet hole, and the baffle plate is arranged after the water inlet hole, so that the water flow is evenly distributed in the cross section of the whole pool width.

The sedimentation tank adopts the principle of compound gravity separation. Under the action of gravity, the density of the manure is partly high

Suspended solids of 1 103 kg mzhi3 (density of water) are separated from the manure by natural sedimentation.

According to the flow direction of manure in the tank, the sedimentation tank can be divided into advection, vertical flow, radial flow and other basic forms, which have their own characteristics and can be applied to different occasions. The advection sedimentation tank has a simple structure and convenient construction, but it covers a large area and has uneven water distribution. The structure of the vertical flow sedimentation tank is circular, occupies a small area, the mud discharge is inconvenient, and the depth of the tank is too large, and the construction is difficult; The radial sedimentation tank has a stereotyped sludge discharge machine, which has a good operation effect, but requires a higher construction quality and management level.

In general, the residence time of manure in the gravity sedimentation tank is 1 3 hours, which can remove more than 50% of the solids. The investment and operating costs of the sedimentation tank are low, but the water content of the solids separated from the sedimentation tank is high.

The advection sedimentation tank inlet mode is composed of three parts: inlet, water outlet, water flow part and sludge bucket. The plane of the pool body is rectangular, the inlet and outlet are respectively located at both ends of the pool, the inlet generally adopts the submerged inlet hole, the water flows into the pool body by the inlet channel through the evenly distributed inlet hole, and the cover mu after the inlet hole is provided with a baffle, so that the water flow is evenly distributed in the cross-section of the whole pool width; Overflow weirs are mostly used at the outlet to ensure that the clarified water after precipitation can flow into the outlet channel along the width of the pool evenly and ridge-resistantly.

1. The plane of the sedimentation tank is rectangular, the inlet is located at one end of the pool length, the submerged water inlet hole is generally used, and the water flows into the pool body through the evenly distributed inlet hole by the inlet channel, and the baffle plate is provided after the water inlet hole, so that the water flow is evenly distributed in the cross section of the entire pool width.

2. The outlet of the sedimentation tank is located at the other end of the pool length, and the overflow weir is mostly used to ensure that the clarified water after precipitation can flow into the outlet channel evenly along the leg of the pool.

3. The width and depth of the pool should ensure that the water flow is evenly distributed along the water section of the pool, and the flow rate is slow and stable according to the design. The length-to-width ratio of the pool is generally not less than 4 meters, and the effective water depth of the pool is generally not more than 3 meters. The sludge bucket is used to accumulate the precipitated sludge, which is mostly located below the bottom of the pond at the front of the pool, and there is a sludge discharge pipe at the bottom of the bucket to discharge the sludge regularly.