How to clean the leather perforated seats, how to clean the perforated leather seats

For perforated seats, it is not recommended to spray directly when cleaning, because this will seep into the seat, you can spray the detergent on a clean wet towel before wiping it (pay attention to wring out the water on the towel). Clean it well and wipe it again with a clean, damp towel. It is important to note that the towel must not be too wet. Hope.

Wash with foam detergent.

Hello car owner, clean with a brush.

Use an Enwald nano sponge, wipe it directly with water.

You can spray some leather cleaner first, and then gently wipe it clean with a soft brush, wipe it off with a dry towel, and ventilate and dry it after cleaning until the seat is completely dry. Car leather seats need to be cleaned regularly, at least 2 times a year or so, and light cleaning every month. If dirt appears on the leather, it should be cleaned immediately with a damp towel.

The following is the relevant information: 1. Car leather is the original leather peeled from the animal, and then processed by the tannery. Generally speaking, cowhide, sheepskin and pigskin are the main raw materials for making genuine leather.

However, leather seats do not mean full leather seats, usually only the backrest and seat cushions are leather, and the rest of the parts are replaced with artificial leather, or even all artificial leather. Nowadays, many leather seats have a lot of small holes in the leather. Originally, the ventilation of the seat was improved through a large number of small holes, which improved the ride comfort, but it also brought a problem, that is, the holes were easy to get into dust and debris, and it was very difficult to clean.

2. Leather is prone to aging after repeated dampness and drying, and over time, this aging will become more and more serious, and leather conditioner can restore the leather to bright and soft as new. When using it for the first time, a small area should be tested on an inconspicuous area, and after applying the conditioner, gently wipe it with a towel or sponge to ensure that the conditioner does not damage the leather or discolor the leather, and then apply it to a large area of care. It is important to note that the wrong cleaning method can cause the leather to harden and have small cracks.

In order to make the seats more ventilated, many car owners will choose to install perforated seats, but such seats are relatively easier to get dirty, so how to clean the holes in perforated seats?

If the small hole in the perforated seat is dirty, the owner can buy leather cleaner to clean it, and the specific operation method is as follows:

1. The owner needs to suck the dust on the seat first, or use a soft brush to remove the dust, and if possible, you can use a vacuum cleaner to suck the floating ash away.

2. Then spray the leather cleaner evenly on the seat, you can wait for a few minutes to let the stain be dissolved by the leather cleaner, and then use a rag or soft brush to brush it dry.

3. Use a damp rag to wipe the seat clean, pay attention to the rag is not too wet, so as to avoid moisture from penetrating into the inside of the seat, if the moisture penetrates into the inside of the seat, the seat will become moldy.

4. Then use a dry rag to dry the seat, if possible, the owner can use a hair dryer to dry the seat, or drive the vehicle to a ventilated place, and wait for the vehicle to dry naturally.