When you apply latte to the car, do you need to go to the record?

This depends on the proportion of the latte art on the car sticker to the total area of the body. In accordance with relevant national laws and regulations.

It is stipulated that the roof and body of the car shall not exceed 30% of the body area, and if it exceeds 30%, it must go to the vehicle management office.

If you apply for an ICP filing and restore the status quo after the ICP filing is filed, you need to apply for an ICP filing again.

It should also be noted that there are also strict rules on the style and color of the body latte modification. There are three colors that belong to special vehicles.

I cannot use it as an exclusive color. Red is for fire fighting vehicles, yellow is for engineering rescue vehicles, and white on the top and blue on the bottom is for national administrative law enforcement vehicles.

Nowadays, many people are very keen on vehicle modification, which is often not limited to the modification of the body appearance. However, it should be noted that the relevant regulations of the state for vehicle modification are very strict, and once it is identified as an illegal modification, it will face very severe penalties, and the gains outweigh the losses. The main attention is the following:

First, the displacement of the car and other parts related to the technical parameters of the car must not be modified without permission. For example, in order to take advantage of loopholes, some people choose a cheap car and a car purchase tax when buying a new car.

Lower small displacement cars, after buying the vehicle displacement to upgrade privately, greatly increase the vehicle displacement. This is not just a serious violation.

There will also be a big security risk.

Second, widening tires, air intake systems, exhaust systems, etc. are also not allowed. These modifications may lead to changes in vehicle performance, which can seriously affect driving safety. If found, a fine will be imposed and restitution will be ordered.

Thirdly, for non-professional off-road vehicles, the chassis of the vehicle cannot be modified to enhance the off-road performance of the vehicle.

Some other modifications that do not involve vehicle performance are generally allowed after filing. However, once it comes to the modification of driving safety, it must be carried out cautiously after consulting professionals, and there must be no luck. This is a responsibility for one's own security and the security of society.

If not, only if you post an advertisement, you need to file for the record. There are generally three layers of sticker latte art, and you must pay attention not to pull during the process of pasting, otherwise there may be deformation.

In this case, there is no need to file for the record. Unless you have made a large rectification, or pasted a colored car film, in this case, you need to go to the record.

Generally speaking, the appearance of the car does not need to be recorded, but it is necessary to post a large body advertisement.

In fact, the state does not prohibit the discoloration of the vehicle, so many car owners will apply the film to change color after picking up the car for a period of time. Many friends may not be sure whether they should go to the DMV for the record. Let's have some frequently asked questions about body movies.

Friends who plan to change colors recently may wish to take a look first. If the area of your car sticker exceeds 30% of the total area of the vehicle, you need to file with the local vehicle administration office within 10 days. For example, put only a small sticker on the rear of the car, or put some decorations such as road flowers on the side of the car.

It should be noted that if your body film is chameleon or electroplating, it cannot be recorded, because these two colors have a certain impact on traffic safety, especially the color of electroplating can easily cause dazzle drivers behind the car.

It depends on the situation, if your vehicle has been filed after changing color, you don't need to tear off the sticker, and it won't exceed 30% of the body area. If your appearance sticker covers more than 30% and there is no filing, it will be torn off, otherwise you will not pass the annual inspection. With the exception of color-changing film or self-adhesive, all other undocumented modifications need to be removed and replaced with original parts.

If you take the manufacturer's finances when you borrow money, you can directly call the 4S store and ask them to borrow the green paper from the manufacturer. If you take out a bank loan, you can't help it. You can only change the color after the loan is paid off.

It can protect the original paint to a certain extent. In particular, the color-changing film using imported glue has a good protective effect on the original car paint.

There is no need to damage or thicken the original car paint like spray paint, which is not conducive to the protection and use of the original car paint, if the color change film is used in a new car, if the color change area exceeds 30% of the body area, according to the requirements to the vehicle management office for the record or renewal of the driving license, so as not to bring trouble to the Luyu traffic police inspection. Generally, there is no need to pull the flower outside the car, and only need to post a large body advertisement for the record. Earlier a common name, the car flower painting is now changed to a car sticker, which originated from racing cars.

The working environment of sticker drawing is between 15 and 30, because the temperature is too high, the film will become larger, and the wet solution will evaporate quickly; If the temperature is too low, it will affect the flexibility of the film, which will affect the bonding effect. Clean the body surface thoroughly with water and a mild detergent. In order for the color stripes to be pasted properly, the surface of the body must be free of dust, wax and other dirt.

The sticker diagram is divided into three layers. The base paper, the PVC sticker drawing itself, and the transfer film are all protective films, and the surface protective film is removed after the final completion. During the pasting process, be careful not to pull the sticker too hard to prevent it from stretching and deforming.

This is not used, but it is not necessary to change the color and decal of the car, this is within the allowable range.

If the decorative area is too large, then you must go to the vehicle management office for the record, otherwise you will be deducted points if you are found.

It depends on how much latte art you have to put on the car, if it exceeds 30% of the body, then you have to go to the DMV for filing.

It is not illegal to exceed 30% of the body.

1. Car stickers cannot be used in special vehicle colors.

China's laws stipulate that although the owner of a motor vehicle can modify the body color, the special red for fire fighting, the yellow for engineering rescue, and the white and blue colors for national administrative law enforcement and collocation belong to the special color of special vehicles, and ordinary vehicles cannot be used.

Therefore, in order to pursue individuality or other purposes, if you want to modify the whole car by changing the color film (or other means), this behavior is an illegal modification of the motor vehicle, and you will be fined 500 1000 yuan, and you will also be ordered to restore the original state.

2. The area of the car sticker cannot exceed 30% of the body area, and more than it needs to be approved.

If the car sticker area is too large (more than 30%) and does not go to the public security traffic management department for approval, this will lead to inconsistency between the vehicle and the driving license. It will also be found to be an illegal modification of the vehicle and will be fined 500 to 1000 yuan. In addition, when the vehicle is out of insurance, the insurance company is likely to refuse to provide relevant compensation services.

Precautions. 1. Because the red color for fire fighting, the yellow color for engineering rescue, and the white and blue colors for national administrative law enforcement are all special colors for special vehicles, so our ordinary vehicles are not allowed to use.

2. The logo sprayed or pasted on the car or the advertisement on the body shall not affect the safe driving.

If the change is too large and the ** on the driving license is different, it will still be considered an illegal modification.

Moreover, in the event of an accident, the insurance company may also refuse to pay the claim.

Therefore, a large area of stickers also have to be reported to the relevant departments to renew the driving license**.

The above content reference: Phoenix Network - Will stickers on the car be punished by the traffic police? What is the abnormal noise in the engine compartment?

It's not illegal, but it affects sight.

There are hidden dangers in insecurity.

1. The choice of the position of the latte art is very important, so as not to affect the line of sight of the car. 2. Choose the best products for latte art, and don't choose those that are easy to fade and fade. 3. The choice of pattern should make people comfortable, and do not choose a pattern that causes discomfort.

First, it is best to use tape to gently stick it on it, second, don't leave too many traces on the car, third, to make the latte art look better, fourth, pay attention to symmetry, fifth, pay attention to the choice of color.

Pay attention to the car paint, to avoid sticking on the glass, to pay attention to the body clean, the range of the paste should be moderate, not too large an area, the sticker should be controlled within a certain range, in order to have the corresponding beauty.

Documents and procedures to be submitted to apply for change:

Fill in the Application Form for Change of Registration of Motor Vehicles, and then submit the Identity Certificate of Motor Vehicle Owner and Driver, Motor Vehicle Registration Certificate, Motor Vehicle Driving License, and the standards for applying for change of registration of motor vehicles**.

1. The body color, engine, fuel type, frame number, etc. can be modified, but there are three colors that belong to the special colors of special vehicles and cannot be used. Red is for fire fighting, yellow is for engineering rescue, and white is for national administrative law enforcement.

Changes to the body, frame, and engine can only be carried out if they have been damaged beyond repair or have quality problems. When applying for a change, a certificate from the repair shop and a certificate of origin for the replacement of the engine, body or frame must be provided at the same time.

2. Replacing the front bumper is a change in the shape of the car, which is feasible after approval, but it is not allowed to improve the off-road performance of the car and other modifications such as raising the chassis. Once illegal modifications are found during the annual review, they must be restored to their original state.

3. Modifications such as widening tires, air intake system, and exhaust system are not allowed. According to the relevant provisions of the Ministry of Public Security's "Measures for the Registration of Motor Vehicles", the specifications of automobile tires in use, the modified air intake system and the exhaust system are not allowed to be changed by the state.

If the above-mentioned modification of the car in use may change the engine power, affect the driving safety, the owner of the motor vehicle who has carried out the illegal modification will be fined 500 1000 yuan according to law, and ordered to restore the original state.

The installation of the rear wing and body surround does not need to be recorded, the total area of the roof film and body latte art shall not exceed 30% of the body area, do not use more than three colors, otherwise it must be recorded! If you want to restore the original status after filing, you must also file for the record!

Car decals do not need to be recorded, as long as the color of the car is not changed, and the internal parts of the car are not changed, there is no need to go to the record. If the owner of the car body latte area more than 30% of the total area of the body, at this time the owner is required to record, if the latte area does not reach 30%, then the owner does not need to go to the vehicle management office for the record.

The filing process for vehicle modification is as follows:

1. Log in to 12123 to exclude vehicle violations first, and the vehicle can only be filed after the violations are processed;

2. Call the vehicle management office where the vehicle is located to make an appointment to register the vehicle;

3. Bring your ID card, driving license, and green book to the vehicle management office to take pictures;

4. Go to the designated window to get **, and copy the ID card by the way;

5. Fill in the vehicle change application form, and then submit ** and ** to the audit window Bisongkou and pay the fee;

6. Wait for the traffic police to check the car. After the vehicle inspection is correct, you can get a new driving license at the designated window;

7. The archiving is completed.

Legal basisArticle 9 of the Provisions on the Registration of Motor Vehicles.

Those who apply to change the color of the body of a motor vehicle or replace the body or frame of a motor vehicle shall fill in the Application Form for Change of Registration of Motor Vehicles and submit statutory certificates and vouchers.

The vehicle management office shall make a decision on whether to approve or not to change it within one day from the date of acceptance. If the change is approved, the owner of the motor vehicle shall submit the motor vehicle to the vehicle management office for inspection within 10 days after the change.

The vehicle management office shall, within one day from the date of acceptance, confirm the motor vehicle, withdraw the original driving license, and re-issue the driving license. If the body or frame is replaced, the rubbing film of the vehicle identification number (frame number) shall also be checked, and the source certificate of the body or frame shall be stored.

The latte art on the exterior of the car is generally not needed, and it only needs to be filed when a large body advertisement is pasted. Car latte art is a common name in the past, but now it is changed to car stickers, and car latte art is derived from motorsports.

Precautions for car latte art:

1. The working environment of sticker latte art is better between 15 and 30. Because the temperature is too high, the film will become larger, and the wet solution will evaporate rapidly; Too low a temperature will affect the flexibility of the film, which will affect the adhesion effect.

2. Use water and neutral cleaning agent to thoroughly clean the surface of the body. In order for the color bar to be properly attached, the surface of the body must be free of dust, wax and other dirt.

3. The sticker latte is divided into three layers, the bottom paper (white glass paper), the PVC sticker latte itself, and the transfer film are both protective film (transparent), and the surface protective film is removed after the final completion. In the process of pasting, be careful not to pull the sticker hard to prevent it from being elongated and deformed.

Yes, otherwise you won't be able to pass the annual review of the online car inspection in 6 years.

Friend, I advise you not to pull the art, not because the police want to take care of it, because after a long time after the whole car is drawn, it will definitely be caught, hehe, is the body sticker legal? Will the car sticker be punished by the police, and will it affect the annual inspection?

No, only large body advertisements need to be recorded.