How can the ground of the bungalow return to moisture, so how can it isolate the moisture?

How can the ground of the bungalow return to moisture, so how can it isolate the moisture? Mystic Law 1:

When the humid weather arrives, be sure to close the windows of the house. In particular, close the windows facing south and southeast so as not to give the moisture outside the window a chance to sneak in. The most important time to protect against moisture is every morning and evening.

The air humidity during these two periods is higher than at noon. If the doors and windows are not closed in time, moisture can seriously penetrate into every corner of the house. In addition, the doors and windows are closed, and if you think that the indoor air is not circulating, it is best to open the windows for ventilation at a short time at noon.

Ben came to these five points to solve the problem of moisture in the house, and it was not too late!

Magic method 2: Meter method.

Generally, the air conditioner used in the household has a dehumidification function, which can be used for dehumidification work. In addition, the heater used for winter heating can also alleviate the humidity of the room to a certain extent, but the effective radiation range of the heater is small, and it cannot immediately produce a dehumidification effect.

Method 3: Hang desiccant.

At present, the most common desiccant is two kinds of dehumidifiers, humidity chambers and dehumidification bags, many of which have a variety of aromas, suitable for large spaces in daily life such as living rooms, rooms, bathrooms, and kitchens. After using it for a period of time, you can take out the substances in the hygroscopic box, buy bulk desiccant, and put it in the box before use.

In addition, it is best to hang a dehumidification bag on a dehumidification bag that absorbs resin and charcoal as raw materials to drive away confined spaces and moisture such as wardrobes and shoe cabinets.

Magic 4: Moisture-proof cabinet furniture.

Recently, moisture-proof cabinet furniture has appeared on the market. For example, a moisture-proof shoe cabinet can store shoes. Moisture-proof wardrobes store clothes, and moisture-proof pantries store dry goods. A moisture-proof multipurpose cabinet can store other things. Safe, environmentally friendly and noiseless, it is not only good for moisture, but also good for health.

Tip 5: Prevent manual moisture.

Buy 10-20 kg of lime, put it in a wooden box or cardboard box, put it under the wardrobe or in the corner of the house, cover it when the weather is not wet, open the lid when the weather is wet, do not open the large windows, the lime absorbs moisture, and the house is dry and pleasant. Or fry the sugar in a pan and put it in a paper bag and put it in a damp place to absorb the moisture.

Ventilate the house every day, let the wind take away the humid air, let the house slowly become dry, and the moisture inside is getting less and less.

You can raise the temperature in the house and light a stove in the room to dry the moisture, otherwise there is no way to isolate it.

Then you should put a plastic film on the floor or use an air dehumidifier to be effective.

The most effective way is to waterproof the whole house, which can effectively isolate the moisture from the ground. If you don't have the conditions to brush waterproof again, you can also buy a dehumidifier, which can also be effectively solved. In addition, if you are in the southern region, it is actually not easy to solve, because in the rainy day, the moisture is not only on the ground, but also in the air.

Open windows frequently for ventilation. This is the easiest and most effective way to do it.

When you feel that the weather is changing from cold to warm, please close all doors and windows immediately, and do not open the exhaust fan as much as possible except for cooking, so as not to draw the humid air from the outside into the room.

Turn on the air conditioner to dehumidify. Use a dehumidifier or refrigeration setting to dehumidify the room, and if the moisture regain is too strong, it is recommended to use a dehumidifier, which will be more effective. Pay special attention to remember to close the doors and windows when turning on the air conditioner to promote dehumidification.

It is generally difficult to completely dehumidify the floor of the room after the moisture returns, you can spread some newspapers and waste books on the ground to absorb water, and if possible, you can also sprinkle some chaff or sawdust on the floor, which can not only absorb water and dehumidify, but also prevent slipping.

Precautions for moisture-proof home improvement.

1. Gaps need to be left in the corners: when laying the floor, it is not necessary to be so tight, and between the wooden floor and the corner, it is best to leave a telescopic gap of about 1cm, so that the moisture on the ground can be more easily dissipated.

2. The door panel is customized: Usually the door panel of the customized cabinet is treated by a professional edge banding machine, and the effect is relatively good, which can maximize the water and air isolation outside the door and play a certain moisture-proof effect.

The above content refers to People's Daily Online-Five tips for moisture-proof at home.

The air is humid in the south, and the home floor is also relatively easy to get damp. At this time, you can try the following methods: Method.

1. Air conditioning dehumidification; Use a dehumidifier or refrigeration setting to dehumidify the room, and if the moisture regain is too strong, it is recommended to use a dehumidifier, which will be more effective. Pay special attention to remember to close the doors and windows when turning on the air conditioner to promote dehumidification. Method.

2. Hygroscopic with desiccant; Commonly used household hygroscopic agents include quicklime, charcoal, activated carbon, etc. In particular, quicklime has a good water absorption effect, but the disadvantage is that quicklime (CAO) becomes mature lime calcium hydroxide (Ca(OH)2) after water absorption, which cannot be reused.

Charcoal is much less hygroscopic than quicklime, but it can be reused after drying. In addition, other desiccants with slightly higher costs include silica gel, calcium chloride, alumina gel, molecular sieve, phosphorus pentoxide, etc. The desiccant is wrapped in newspaper and placed around the house or under the bed when the weather returns.

If the desiccant is mixed with a small amount of sand, the permeability of the desiccant can be increased, and the effect of moisture absorption can be improved. Method.

3. Spread some newspapers, waste books, etc. on the ground to absorb water, and if possible, you can also sprinkle some chaff or sawdust on the floor, which can not only absorb water and dehumidify, but also prevent slipping.

If it is on the ground floor, it is necessary to deepen the outdoor drainage ditch to keep the drainage smooth, pay attention to the good ventilation of the room, the air can produce better convection, and the windows should be rectified if they are not reasonable. If you do the above two things, you will generally not regain the tide.

The weather gradually becomes hotter and the rainfall increases, which increases the water vapor content in the air, and the doors, closets, walls, glass, and floors at home are cooler than the air, and the water vapor in the air can liquefy when cold, resulting in resurgence.

The treatment methods for serious ground moisture return are as follows:1. Lay a moisture-proof mat to prevent the moisture in the air from touching the floor, causing the water vapor to condense into water droplets and scratch the floor.

2. Pour the salt into warm water, and soak the mop with a mop to mop the floor.

3. Put a cloth mat at the door of the bathroom and wipe the water stains on the soles of the shoes to avoid water stains from being brought indoors.

4. Regularly wax the floor and cover the dust grinding, which can not only ensure the brightness of the floor, but also maintain the waterproofness.

Causes of damp floors1. When the humid air with high temperature (relative humidity above 90%) encounters the ground with low temperature and smooth and does not absorb water, it is easy to produce condensate on the ground. Most of these cases occur during the rainy season, when there is a lot of rain, high temperatures, and high humidity.

2. The water in the foundation soil under the ground cushion rises through capillary action, and the vapor water penetrates upward, which makes the ground material moist and aggravates the humidity of the whole room. This tends to happen all year round and is difficult to deal with.

3. There are reasons such as poor outdoor drainage and poor ventilation of the room.

1. You can use desiccant for dehumidification, it is best to choose a desiccant that can be used repeatedly, which can not only save costs, but also have a very good effect.

2. The installation of a dehumidifier can effectively solve the problem of ground moisture, but this dehumidifier should be left on all the time, which is more power-consuming, and can be used if the economic conditions are sufficient.

3. Because the outdoor is relatively humid in the rainy season, moisture is easy to enter the room, resulting in dampness on the ground, so in order to avoid moisture entering the room, you can close the doors and windows to reduce the moisture entering the room.

Ground moisture reflux inspection and treatment

1. Inspection. Check the ground for cracks, because there are cracks that allow water to penetrate easily, and generally regular cracks will appear along the longitudinal or transverse direction of the house. In addition, you can also check whether the ground is hollow, you can use a tool to gently knock on the ground, if there is a hollow sound after beating, it means that there is a hollow drum phenomenon.

2. Treatment of cracks and hollows.

Clean up the cracks around, and then evenly apply the adhesive, and so that the adhesive is completely dry, the cracks will be filled.

3. Moisture-proof treatment.

After the cracks and hollows are treated, you can call for moisture-proof treatment, clean up the foundation first, and then brush the waterproof paint twice, apply force when brushing for the first time, so that the waterproof coating can penetrate deep into the pores, and wait for 24 hours later, the second brushing can be carried out, so that the waterproof coating film can be formed, and the waterproof coating can be applied higher for the connection between the ground and the wall.

Summary. Close windows appropriately.

Because the weather is relatively humid, so properly close the window, can solve the problem of ground moisture, especially in the morning and evening, the humidity is more serious, in the afternoon the weather is relatively dry, you can open the window to dry the ground, to achieve the effect of dehumidification.

2. Lay moisture-proof mats on the ground.

You can lay a moisture-proof mat on the ground, which can block the moisture from the outside world and achieve the effect of heat preservation and moisture-proof.

3. Spread waste newspapers.

For places where the ground is more humid, you can lay waste newspapers, which can not only absorb the moisture on the ground, but also rub the water on the shoes, which plays a role of killing two birds with one stone.

What should I do if the ground is retiring?

Properly close the window because the weather is more humid than Pipei, so properly close the window, can solve the problem of good tide on the ground, especially in the morning and evening, the humidity is more serious, in the afternoon, the weather is relatively dry, you can Chi Hui lead open the window to dry the ground, to achieve the effect of dehumidification. 2. The moisture-proof mat can be laid on the ground, which can block the moisture of the outside world and achieve the effect of heat preservation and moisture-proof. 3. Laying waste newspapers can be used for places where the ground is more humid, which can not only absorb the moisture on the ground, but also rub the water on the shoes, which plays a role of killing two birds with one stone.

Wipe the wooden floor with a soft dry rag You can wipe the floor with a soft dry rag, and after wiping, you must close the window, and you must not open the window, otherwise it will cause the ground to be wetter. 5. The food shouts that Heng salt water can be used to mop the floor with warm water, and after the salt is fully dissolved, you can use salt water to mop the floor, wring it out as much as possible and then dragging, Zheng does this can have the effect of moisture-proof. 6. Quicklime moisture-proof quicklime is a desiccant, which can absorb moisture in the air and keep the indoor air dry.

7. Candles can be lit, which can not only remove indoor mildew, but also reduce indoor moisture and play a role in preventing moisture on the ground. 8. Use an air conditioner or dehumidifier to turn on the air conditioner or dehumidifier, which can effectively reduce indoor humidity, keep indoor air fresh, and solve the problem of moisture return on the ground.

In the rainy season, many places in the south will have the phenomenon of "returning to the south sky", in this weather, the ground and walls are very wet, and the clothes we dry are not easy to dry, and there will be a musty smell. The ground is damp, which is easy to cause some damage to the floor, and people are also easy to slip and fall when walking. How to deal with the re-damp ground?

Doors and windows can be closed tightly to prevent humid air from entering the room; You can turn on the air conditioner to heat the house, so that the temperature in the house rises, and the evaporation rate of water droplets on the ground is accelerated; You can put some dehumidifier in all corners of the ground, which can effectively play the role of moisture absorption; You can also spread newspaper on the ground, which can effectively absorb the moisture on the ground.

What is the cause of the return of moisture on the ground.

1. High air humidity.

In the spring of each year, there are many rainy days in the south, and the humidity is large, when the humid air meets the low temperature and smooth ground with poor water absorption, it is easy to condense water on the ground, making the ground become wet. Once the air humidity decreases and the temperature rises, the phenomenon of moisture return on the ground will gradually improve.

2. The reason for the ground base.

Another reason is that the ground base layer is not treated well, or is not treated with moisture, which causes the water vapor in the foundation soil to penetrate upward, so that the ground material is damp, and the entire Moling ground becomes wet.

How to prevent moisture on the ground.

1. During the ground construction, the construction must be strict and standardized, and the construction quality must be strictly supervised.

2. The ground fill must be dealt with well, and the clay ramming cannot be selected, nor can the method of loose filling and water immersion be adopted.

3. In the construction of bulk fiber at the ground base, it is necessary to pay attention to the construction of the moisture-proof layer, the foundation soil should be tamped, the overhead plate should be ventilated, the joints of the overhead board should be focused on moisture-proof treatment, and the wall foundation should be arranged with a waterproof mortar moisture-proof layer.

Ground moisture reflux treatment method:

1. Reduce the temperature difference between indoor and outdoor.

We can use heating, heaters and other equipment indoors, so as to increase the indoor temperature, so that the temperature difference between indoor and outdoor is minimized, or the indoor temperature is slightly higher than the outdoor temperature, so as to effectively avoid moisture-proof phenomena on the ground.

2. Isolate the immersion of moisture.

Pay attention to the weather forecast and actual weather changes at any time, once you find that the southerly weather is coming, you should close the indoor doors and windows in time, and the doors of each cabinet should also be closed, so that you can effectively isolate the outdoor moisture immersion, and effectively avoid the dampness on the ground.

3. Use hygroscopic items.

We can place some items with hygroscopic function in all corners of the indoor ground, such as: quicklime, etc., when the quicklime melts with water, it will absorb the moisture in the indoor air, and will release a certain amount of heat, which will increase some temperature for the room, so as to effectively avoid moisture-proof phenomena on the ground.

4. Use dehumidification equipment.

We can place some dehumidification equipment indoors, such as air conditioners, dehumidifiers, etc., use the moisture absorption function of these equipment to reduce the humidity in the room, and then use the heating function of these equipment to heat the room, so as to effectively avoid the moisture-proof phenomenon on the opposite side.

5. Wipe with a dry rag.

We can also often use a dry rag to wipe the ground constantly, wipe off the moisture on the ground, and keep the ground dry, so as to effectively avoid moisture-proof phenomena on the ground.