How to remove limescale from the base of a flower pot

There are a variety of ways to remove limescale from the base of a pot. Here are some effective ways to do it:

1.Use a gray knife or other tool to gently scrape off. This method is suitable for smaller limescales, which can be scraped off and rinsed with clean water.

2.Use a cleaning solution. Pour an appropriate amount of cleaning solution into a plastic basin, use an old toothbrush to dip the cleaning liquid to scrub the scale, observe the dissolution of the scale while brushing, if it is not clean enough, you can repeat the second step until the scale is completely removed.

3.Use vinegar. Mix vinegar and water in the established proportion, then soak the base of the pot in the vinegar solution, let it stand for 10 minutes, observe whether the scale has become lighter, if there is still soak until the scale is completely removed.

4.Ferrous sulfate is used. To be precise, ferrous sulfate should be a strong acid and weak alkali salt, which is weakly acidic after being dissolved in water, and is used to eliminate scale without harming the material of the tray itself.

5.Use toilet sanitizer. Mix the toilet cleaner with water and wipe the tray with a cloth that is dipped in the mixture and can be easily removed. This method is suitable for limescale removal over a smaller area.

It should be noted that the above methods are for reference only, and the specific methods can be selected according to the situation. If the limescale is severe, it is recommended to try to remove it using the above method first, and if it cannot be removed, you can consider replacing the base of the pot.

The scale on the base of the pot is an inorganic salt that has been precipitated for a long time.

Cleaning method: first wet the parts to be cleaned, and then gently scrape them with a gray knife or other tools (such as bamboo, iron, etc.), and then rinse with water if there is a slightly unclean part, and then wipe it with a rag to eliminate. You can also sprinkle some baking soda.

Mix with white vinegar and water, then rinse with water.

Ways to remove residual dirt under the bottom of the pot:

1. Wet the parts of the pot to be cleaned with water, and then gently scrape off with a gray knife or other tools (such as bamboo, iron, etc.), and then rinse with water if there is a slight unclean part, and then wipe it with a rag to eliminate.

2. Scrub it with a little vinegar first, or wipe it with a small amount of gasoline, and then wash it with water.

3. Mix citric acid.

Pour it on the stain, wipe it with a rag and wash it off with water.

First of all, you can use a brush to clean some dirt on the surface of the flower pot that is easy to brush off, and you also need to clean the flower pot, at least to remove the old soil in the flower pot.

Then you can prepare some white vinegar and add it to the water, the concentration of white vinegar is about 5%, you can mix them with water. The ratio of white vinegar to water is not too high, white vinegar to water can be mixed in a ratio of 1:5, if you add a little more water, the soaking time will be extended a little.

Mix white vinegar with water at a ratio of 1:5, and it will take 30 minutes to soak the pot in it, and if the water is in the solution in a higher ratio, the longer it will be soaked.

After soaking the pot in white vinegar solution, the saline substance on the surface can be easily removed. Soak them directly in clean water, after which the white stains will be completely removed. After the flower pot is cleaned, it can be scalded with boiling water once, so that it can achieve the effect of sterilization and disinfection, and the flower pot is used before use, in addition to cleaning it, it is best to disinfect it in advance, and put it in the scorching sun for two or three days, it can also play a good sterilization effect.

Eliminate the production of white alkali

1. The flower soil is kept loose and breathable, and has good water filtration. When watering, the water flow can seep out of the pot quickly, and will not seep out of the pot wall, which can eliminate white alkali.

2. Flower maintenance for a period of time should often loosen the soil to maintain the water filtration of the soil. When watering, you can add a small amount of white vinegar to subtly alkali the water alkali in the soil, neutralize it, and it will not produce white alkali.

3. When fertilizing, use liquid fertilizer water, and the "rice water" prepared can supplement "nitrogen, phosphorus and potassium", and the rice water after fermentation becomes acidic, which can also play a role in neutralizing and removing white alkali.

4. When watering, it must be watered thoroughly, and half of the water is easy to retain calcium carbonate and other substances in the water in the soil.

1. Buy some ferrous sulfate in the market, and then dilute it with water into a concentration of 1% ferrous sulfate solution, and use this solution to water flowers, which will neutralize the acid and alkali, and achieve the effect of alkaline becoming acidic and removing white alkali.

2. Do not throw away the rice water used for cooking, you can collect it, let the rice water ferment and use it to water the flowers, which can reduce the alkalinity in the pot, improve the soil quality, supplement nutrients, and be very beneficial to the growth of plants.

3. Rainwater and snow water are acidic liquids, which can be collected more and packed in containers and used when watering flowers, which can make the white alkali disappear slowly and be conducive to the growth of plants.

1. Ferrous sulfate.

Buy some ferrous sulfate in the market, and then dilute it with water into a concentration of 1% ferrous sulfate solution, and use this solution to water flowers, which will neutralize the acid and alkali, and achieve the effect of alkaline becoming acidic and removing alkali scale.

2. White vinegar. Pour a little white vinegar on a paper towel or towel, soak the paper towel completely, soak for a while, and rub the alkali scale on the pot vigorously to remove.

3. Lemon. If you have lemons at home, you can use lemons to treat alkaline scale, the acidity of lemons can dissolve scale, and there is a fresh lemon aroma, cut lemons into slices, soak them in water for a period of time, and then wipe them with paper towels to wipe alkaline scales.

When watering when raising flowers, some minerals carried in the water, as well as calcium carbonate and other substances will be trapped in the flower soil, and when the water penetrates into the pot wall, calcium carbonate and some minerals will be trapped on the wall of the pot. In large quantities, it accumulates into a white calcareous substance. In the process of raising flowers, compound fertilizers are often used, which will produce inorganic salts, and too many inorganic salts are retained in the pots to react with the elements in the soil, and a lot of alkaline substances appear, which flow out of the pots under the penetration of water, and white adhesion substances are produced on the pots.

1. Use the "cleaning agent" used to clean the toilet. Most cleaning agents use oxalic acid, or "citric acid" as the main ingredient. Acids and alkalis can undergo chemical reactions. Soak in water and wipe it off.

2. Toothpaste with a mixture of baking soda is also a good way to clean white alkali. Where the water alkali appears, you can spray it wet, and then apply the toothpaste with baking soda. It can be cleaned after a minute.

3. Spray the white vinegar directly on the position with water alkali, and wash it after 1 minute to remove the white alkali.

The dirt on the outside of the purple sand flower pot particularly affects its appearance and is particularly difficult to remove, so it solves the problem of unsightly appearance on the outside in this way.

Vinegar removal method is adopted. Clean up the soil in the pot first, and then spray the edible vinegar on the inner and outer walls of the pot, especially at the bottom hole and the outer wall hole of the flower pot for raising orchids, spray more, especially the sediment at the bottom, stay for 2 3 minutes, and then use a steel wool ball dipped in warm water to scrub the saline-alkaline substances attached to the pot wall, bottom hole, air hole, etc., which can be removed.

(1) Edible vinegar is used to remove white alkali

Clean up the soil in the pot first, and then spray the vinegar on the inner and outer walls of the pot, especially at the bottom hole and outer wall hole of the pot where orchids are raised, and spray more, especially the sediment at the bottom.

After staying for 2 or 3 minutes, use a steel wool ball dipped in warm water to scrub the saline-alkaline substances attached to the basin wall, bottom holes, air vents, etc., which can be removed.

(2) Remove white water alkali by physical methods

After cleaning the soil inside and outside the pot, put it in the sun to dry the pot for 20 30 minutes, wait for the saline-alkali substance on the wall of the pot to dry, and then use fine sandpaper to wipe off the saline-alkaline substance.

(3) Use detergent to scrub the white saline-alkali substance

The method is: first clean the soil on the inner and outer walls of the flower pot, then spray some detergent on the wall of the flower pot, and then scrub the flower pot with a soft cloth dipped in detergent.

After repeated scrubbing, some of the saline and alkaline substances that stick to the wall of the basin are removed. However, if you want to completely remove the oak, you need to remove it with acetic acid.

How to prevent alkaline objects from sticking to the walls of the basin.

1. In the northern region, due to the alkaline water quality of tap water, a small amount of dilution of 500 times of ferrous sulfate should be regularly applied when watering flowers, or a few drops of rice vinegar without salt should be added to the watering water.

It can not only improve the alkalinity of the potting soil, make the potting soil more acidic, reduce or avoid the alkaline objects in the water, and attach to the pot wall and other places through watering, but also make the acid-loving flowers and trees have bright green leaves and grow better.

2. Acidic or physiologically acidic fertilizers should be used for fertilizing flowers and trees. Fertilizers such as ammonium bicarbonate and plant ash are alkaline fertilizers, and should not be watered for acid-loving flowers and trees; The use of fermented organic fertilizer is more reliable and fast than inorganic fertilizer.

For example, watering flowers such as rice washing water after fermentation and decomposition is a good fertilizer for raising flowers, which can avoid alkaline substances damaging the pot wall.

Hello dear! We'll be happy to answer for you. How to remove limescale on the ceramic wash basin A:

Hello dear, the scale on the ceramic wash basin can be wiped with weak acid. Generally, cleaning companies mostly use oxalic acid, and other weak acids can also be used, even white vinegar, or fresh lemon. It will not hurt the ceramic glaze.

The following three-point toothpaste method: take an appropriate amount of toothpaste and apply it evenly to the tea scale, gently scrub it with a dishcloth, and then rinse it with water. Vinegar method:

The tea scale on the metal tea pavilion can be easily removed by soaking it in vinegar or soaking it in bleach. Potato method: first prepare hot water, chop the potatoes and put them in a cup, pour the prepared hot water into the cup and soak for 10 minutes to remove the tea scale.