-
Do the math how much it will cost you to renovate your home
Usually, the bathroom is made of polypropylene cloth for waterproofing, and 2-3 layers need to be made. Polypropylene cloth is waterproof, stable, and resistant to aging, because the surface mesh structure and cement of polypropylene cloth can be directly solidified and bonded to achieve a strong waterproof effect.
Bathroom polypropylene cloth waterproof specification:
1. The waterproof construction of polypropylene cloth should be constructed in a normal temperature environment, and it will not work if it is too hot or too cold, which will affect the waterproof effect. Before construction, it is necessary to clean up the base layer, there can be no debris and oil stains, etc., and when encountering unevenness, it is necessary to level with cement mortar. In addition, polypropylene cloth waterproofing is best used for cement-based surface in order to exert the waterproof effect, sand wall or brick wall is not good, which will affect the viscosity of polypropylene cloth.
2. Before the polypropylene cloth is waterproofed, the root of the pipe, the yin and yang corners and other special positions should be cleaned to ensure that the pipe is unobstructed, especially the yin and yang corners should be strengthened. Before laying the polypropylene cloth, first lay the back side up on the ground, paint a layer of cement slurry on it, and then paint a layer of cement slurry on the base surface, paste the polypropylene cloth to the ground where the cement slurry is painted, pay attention to laying from the inside to the outside, and discharge the bubbles in the polypropylene cloth while laying, otherwise the waterproof quality will be affected.
3. After the polypropylene cloth is waterproofed, protective measures should be taken to prevent machines and tools from damaging the waterproof membrane and affecting the waterproof effect.
Enter the area and get the decoration for free**].
Enter the area and get the decoration for free**].
-
Bathroom waterproofing is generally done once, but the corners and the perimeter of the water pipe should be done twice.
-
Make two or two tarps at 90 degrees.
-
Bathroom waterproofing is very important, if the polypropylene cloth is used for waterproofing, it is best to use 2 for the ground and 1 for the wall.
-
Summary. Kiss. I'm glad to answer for you, is it okay to use a layer of polypropylene cloth for waterproofing the bathroom? Yes, use a layer of polypropylene cloth and brush it with cement mortar. But be careful when laying bricks and try not to break the polypropylene layer. <>
Kiss. I'm glad to answer for you, can you use polypropylene cloth to make a layer of waterproofing in the bathroom? You can sell the bridge state, use a layer of polypropylene cloth and brush it with cement mortar to close the rock. But be careful when laying bricks and try not to break the polypropylene layer. <>
It is better to use polypropylene cloth or waterproof coating, which of the two is better waterproof and has a long life.
Pro, is it better to use polypropylene cloth or waterproof coating, which of the two types of waterproof is better and has a long life? In these two cases, the coating ** chain is slightly higher early, at least more than two times, and the waterproof coating or shed reed has better performance and longer life. <>
The waterproof master said that there were two more layers of glue at the drain, and he said that there was no problem at all, ten thousand years prison, I was a little worried about whether it would work.
Pro, polypropylene cloth waterproof must be flat on the ground, the requirements of the environment in line with the construction process to be relatively high, afraid of hollowing, water is drilled on the seam, so waterproof or use anti-suspicion water paint is better:
Kiss. There is no problem without hollow drums, and there is no problem with the seams being taken care of.
How many years does it last when it is waterproofed with polypropylene cloth.
Dear, it is no problem to have no damage to the interior for 50 years<>
I'm just a little worried about whether it will work.
Dear, don't worry, the waterproof master said that he didn't have to worry, and he wouldn't smash his signboard. After doing the waterproofing of Jingyou, let the master of the sedan chair do a 48-hour closed water experiment <>
The main thing is that I don't believe what they say, and I don't feel at ease, so I consult you, dear, thank you for your trust. Your worries are right, waterproofing is indeed a more important part of the decoration, but the polypropylene cloth is low and sold early, and there are still many people who use it. As long as the closed water experiment is done in the early stage, there will be no problem in the later stage.
If you don't ask for 48 hours after doing it, it's completely okay?
Yes, dear, you can rest assured. <>
-
Summary. Bathroom waterproofing on the use of polypropylene cloth to make a layer of can you do hello, the general bathroom waterproof material will choose K11, JS, etc., so it is not recommended that you use polypropylene, the construction is inconvenient, and it is easy to appear hidden dangers in waterproof performance when it is not in place, and polypropylene may endanger human health.
Is it okay to use polypropylene cloth to make a layer of waterproof in the bathroom, the general bathroom waterproof material will choose K11, JS, etc., so it is not recommended that you use polypropylene Li noisy, the construction is inconvenient, and it is easy to have hidden dangers in waterproof performance when it is not in place, and polypropylene reed may endanger human health.
Is it okay to use polypropylene cloth.
Yes pro. Make a layer of polypropylene cloth, and do not brush waterproof paint on it, if this is done, how many years will the waterproof life of the polypropylene cloth be.
Generally, it is not too heavy to cover the occasion will be picked and used polypropylene cloth to do waterproofing, this waterproof material mold cleaning material is not very beautiful, if the temperature is very high, it will also lead to the possibility of fusion, after all, it is used just like filtration.
My bathroom is made of bent dust polypropylene cloth, and the water pipes are pasted with two more layers, and the waterproof master said that this is no problem, and it is better than brushing waterproof paint to bury it, and I am a little worried about whether it can work.
Polypropylene is guessed that Hu waterproof is rarely used for home improvement waterproofing now. The main existence is:1
The structure of the kitchen and bathroom area is complex and needs to be cut and spliced, which will lead to the position of the splicing being easy to produce splicing seam coverage. 2.Pipes and corners are not easy to handle.
These areas are the key areas for water leakage. 3.The façade wall is not easy to do, because the polypropylene has to be made as a bonding layer.
If it is not wiped well, it will not be smooth. affect the tiling. It is recommended that home decoration kitchens and bathrooms still choose cement-based waterproof coatings.
Rigidity and softness, simple construction. And it does not affect the tiling construction.
Is it the same as brushing waterproof paint when it is done with polypropylene cloth?
Simple polypropylene cloth does not have the ability to resist water. Generally, the polypropylene is stuffed with a cloth cover to clamp between the waterproof coatings to play a reinforcing role. That's why waterproof coatings are good.
The advantage of polyurethane coating is that it is a seamless coating film, because it is a liquid directly painted on the wall, there will be no gaps when painting again, the tightness is good, and the waterproof effect of Sun Qin is self-evident. In addition, if the polypropylene membrane is not done well, it is equivalent to not doing waterproofing, and water will seep in. When we are in construction, we use polyurethane in terms of long-term waterproof effect, I hope it will help you.
Not the same pro.
1.Polypropylene cloth waterproofing is a waterproofing membrane. >>>More
Bathroom leakage generally does not involve the wall, if you knock on the wall, you only need to pay attention to whether it is a load-bearing wall. However, the waterproofing of the ground should be expanded. The location of the bathroom after expansion must be waterproof!
The height is determined according to the need, generally speaking, the bathroom is waterproof 180 cm high, and the non-shower wall waterproof coating cannot be less than 35 cm in principle. However, in order to strengthen the waterproof effect, it is recommended to achieve a uniform height of 180 cm. In addition, for the light wall of the toilet and bathroom renovation and the self-built light wall, it is recommended that the waterproof height should be at the top. >>>More
Directly on the waterproof paint. And I personally recommend that in the shower room, a position with a lot of water, don't brush to a meter as required, and brush it directly to the top. Stay on the safe side.
The first thing to do in the decoration of the new house is to make waterproof for the bathroom, this thing must not be forgotten, because if this is not done, it will bring you a lot of trouble in the later stage, our old house is because of the waterproof membrane is done, so the back always quarrels with the downstairs, because our home will always leak, I don't know what the reason is, and then I went to their house to see the water in our toilet, all of which leaked to their toilet, this is our full responsibility, so we need to be responsible for their maintenance. <> >>>More