-
Bathroom leakage generally does not involve the wall, if you knock on the wall, you only need to pay attention to whether it is a load-bearing wall. However, the waterproofing of the ground should be expanded. The location of the bathroom after expansion must be waterproof!
-
First, the load-bearing wall cannot be removed, which will have a great impact on the safety of the entire building. Second, the waterproofing of the bathroom must be done well. It is recommended to use CF-2000 high-efficiency composite waterproofing agent.
This material is rigid waterproof, which can be made of waterproof, good strength, and is not easy to be damaged by other construction links.
-
Start by asking the property developer. The type of structure of this building. Can the wall of the bathroom be removed?
If it is a load-bearing wall, it will be scrapped if it is dismantled. If it's just a partition wall, that's fine... It's easy to knock it off.
When laying bricks, it is designed to discharge water, and professionals are needed. @
-
There is no need to think too much about the new building, because now the new building is the whole floor slab cast-in-place, but if it is an old building with a hollow slab, it must be taken seriously, because only the bathroom is cast-in-place concrete! Look at the actual situation, if this is the case of the old building, it is not recommended that you change the interior layout!
-
The load-bearing wall cannot be demolished and the safety of the house structure cannot be destroyed. It depends on whether the previous pipes in your house are embedded in the wall or under the floor tiles, and the old pipes are dismantled if they are in**you**. Then tell the construction team to start work according to your preferences.
Water leakage mainly depends on whether the waterproof can be done, generally after the pipe is laid, before the floor tiles are not paved, try for a few days to see if the water seepage downstairs is not seepage. If there is no water seepage, you can stick the floor tiles. And the same goes for floor drains.
-
Apply a layer of waterproof paint on the wall or floor, and then pave the tiles with tile adhesive, so that it is 0k.
-
Yes, yellow mud may be dirt deposited at the bottom of the drain pipe and needs to be removed. Removal needs to be done carefully to avoid damage to the drain pipes.
Small holes in the joints of the floor slabs need to be sealed. If left unplugged, small holes can cause water to seep into the slab, causing problems such as dampness or bacterial growth. Therefore, in order to prevent these problems, it is necessary to block them.
-
Waterproof toilets need to be constructed in accordance with the specifications, including the following aspects:
Ground waterproofing: The ground waterproof layer should be made of waterproof materials, such as latex paint, etc.
Wall waterproofing: the wall and the interface between the wall and the ground also need to be waterproofed, and the waterproof material should be waterproof material with good water resistance, such as waterproof mortar.
Plumbing installation in the bathroom: Plumbing must be packed with waterproof material to prevent leakage.
Door and window installation: windows, doors, and the interface between windows and doors and walls should also be waterproofed.
Bathroom equipment selection: choose toilet equipment with good waterproof performance, such as smart toilets.
Finally, it should be noted that the waterproofing project should be completed by a professional waterproof company to avoid leakage caused by unprofessional construction.
In addition: If there is a circle of yellow mud at the bottom of the drain pipe, it may be caused by water accumulation inside the drain pipe, it is recommended to remove this circle of yellow mud first, and then clean and maintain the drain pipe. If there are small holes in the pipes at the joints of the floor slabs, they need to be plugged to ensure waterproofing.
-
For the waterproofing of the restroom, you can consider the following steps:
Check that the restroom plumbing system is working properly and that there are no leaks or leaks in the pipes.
Install waterproof paint on the floor and walls of the restroom to prevent water from seeping.
Install waterproof shower doors in the bathtub and shower area to prevent water from spilling out of the tub.
Install leak-proof water protectors on faucets and washbasins to prevent water from seeping into the basement.
Regularly inspect the waterproofing systems in your restrooms to ensure they are functioning properly.
If you're not sure how to fix the waterproofing of your restroom, it's a good idea to ask a professional for help.
-
Waterproofing of the bathroom is very important, and here are some waterproofing measures:
Use waterproof paint: Paint floors, walls, balconies, and other areas that are potentially leaking.
Install waterproofing membranes: Install waterproofing membranes on the floor, walls, and balconies of the bathroom.
Install anti-leakage products: Install anti-leakage products, such as floor drains in bathrooms and anti-leakage clogging agents for pipes.
Install waterproof partitions: Install waterproof partitions on the balcony and walls of the bathroom.
Keep your restroom clean: Clean your restroom frequently to prevent leaks and leaks.
Regular inspections: Regularly inspect the waterproofing systems in your restrooms to make sure they are working properly.
If there is a problem with the waterproofing system in the restroom, seek the help of a professional immediately to avoid further damage.
-
Use good waterproofing, brush at least twice or more, the wall should be meters, and the closed water test should be completed for 48 hours.
-
Apply waterproof glue and tarpaulin. There are those who specialize in this, and those who dry plumbing on the roadside know it.
The main attention is to the height, you can go up a little higher.
-
General polyurethane, or K11, and JS, different, it is recommended to go to our company** to see.
-
1. Inspect and accept the appearance, variety, specification, packaging, size and quantity of materials, and form corresponding acceptance records.
2. Check the quality certification documents of the materials and include them in the engineering and technical files.
3. After the material enters the site, the material inspection report shall be issued according to the specification.
4. When all the indicators of the physical properties of the material meet the standards, it is qualified; If an index does not meet the requirements of the standard, the index should be re-sampled in the tested product for re-inspection, and the re-test result meets the requirements of the standard, and the batch of materials will be judged to be qualified.
5. Waterproof material. There are three main categories: waterproofing membranes; 911 polyurethane waterproofing material; New polymer cementitious waterproofing material.
The last category is divided into general-purpose GS waterproof materials and flexible JS waterproof materials. Among them, the universal waterproof material is suitable for the waterproofing of the indoor floor and wall of the family.
-
**Method: Chisel the old "floor drain and the upper mouth of the sewer pipe and the floor slab", connect the interface between the floor drain and the sewer pipe, and then use 1:1 cement mortar and 15% of the cement content of the alum stone expansion agent to make up, you can.
It turns out that the bathroom waterproofing is the overall flexible waterproofing, and after moving here, "brush the joint and its surroundings with cement slurry and 20% of the cement content of alum stone expansion agent", which will not affect other places in the future!
In addition, the bathtub drain is useless, remove the bathtub, chisel the interface of the sewer pipe, first plug the nozzle and then use 1:1 cement mortar and 15% of the cement content of the alum stone expansion agent to make up, you can.
Added:1Alum stone expansion agent, brown-red, ask where cement is sold, there should be, the unit price is 500-800
Yuan tons, slightly more expensive than cement, but the amount used is less.
2.If you buy more (up to 1 package, 50 kg), then you can "chisel the floor tiles on the flexible waterproof layer of the original bathroom, and use 1:1 cement mortar and 15-18% alum stone expansion agent with cement content to make up the whole while reattaching the floor tiles."
3.Special attention is paid to the fact that "the ground is at the corner of the wall, the mortar at the upper mouth of the sewer should be done", the base layer should be chiseled before the mortar, and the floating dust should be cleaned up.
4。Pay attention to the two days before you can get on, so that there will be no water leakage in the future!
-
If you need it, go to a waterproofing company.
To must, when the rough house comes down, the real estate developer is waterproof, but their hydropower location is not in line with their own home, generally have to carry out hydropower transformation, in the hydropower transformation of the original waterproof layer destroyed, the bathroom water consumption, the environment is humid, so the waterproof division must do, the general shower place to do 1800mm, others to do 600mm from the ground, on it.
The size can be selected according to your own needs, most of the toilet is about 70 in height, 70 in length, the smallest is about 62, the big one is 72, 3, the width is between 36 and 40 37, 38 or so is more common The unit is all centimeters, and the installation hole position under the toilet bowl 30 and 40 are national standards. There is also a saying that it is 28, 38The two are actually the same, just the edge of a measuring hole and the other the center. >>>More
If the mirror absorbs yin qi during the day and releases it at night, facing the bathroom door, the feng shui of the air outlet at the bathroom door will be directly destroyed, resulting in a fierce qi that damages the health and financial fortune of the family. This kind of problem can be solved in this way, first consider hanging a curtain behind the bathroom door, and then hang a gourd outside the bathroom door, which can absorb evil qi, but the feng shui function is relatively weak, and it is the five emperor money that specifically resolves the situation of the door to the toilet, and the five emperor money is composed of Shunzhi, Kangxi, Yongzheng, Qianlong, and Jiaqing Tongbao, you can go to the antique street by yourself to complete the five copper coins, if the requirements are relatively high, you need to use people who understand feng shui to prepare items like the five emperor coins that are strong to block and resolve the door to dissolve the trouble. It is specially aimed at the more powerful feng shui home problems, and the function is the best. In addition, you can also put green plants next to the bathroom door, which has a certain purification effect on dirty gases and can also play a certain role in improvement.
It is recommended to pave the floor of the bathroom with floor tiles. Because it is most convenient to rub, walk, mop, clean, and lay floor tiles frequently, it has good durability. The type, quality and even fashion of the domestic magnetic floor tiles are in line with the best and most high-end international market. >>>More