What should I do if the window of the plastic steel window leaks after the window is closed?

What is a "folding"? There is no such word!

Those that need to be repaired and replaced can only be checked gradually.

It is recommended to replace the damaged and worn sealing strips or sealing accessories such as the hair, "the most important thing for windows is the sealing fittings", as well as the sealing strips on the upper and lower horizontal positions of the window sash.

Then try again.

If there is, it means that it is a problem with the profile structure of the window itself, which cannot be solved.

In general, casement windows (sashes that can be opened indoors or outdoors) are slightly more sealed; The sealing of the sliding window (the sash pushes and pulls horizontally left and right on the window track) is slightly worse, and the reason for the poor sealing of the sliding window is that the sliding window is pushed and pulled by the gap, and the poor sealing is a disadvantage that cannot be improved.

If there is air leakage, you can install a double window (install another layer of windows on the window sill), in order to save costs, you can use a single glass window, which is more economical.

If the air leakage is caused by the quality of doors and windows, such as the large gap of the hinge, the lack of air leakage of the rubber strip at the corner, you can find the window factory to mediate and repair the hardware, and the air leakage of the rubber strip can also buy a bottle of building sealant to apply to the air leakage.

The way to take a step back is to tape the gap, or put a layer of plastic sheeting, or put some covering.

It is necessary to check the cause of the air leakage of the plastic steel window before carrying out the repair work.

1. If there is air leakage due to the deformation of the window. At this time, check the degree of deformation, if it is only a subtle deformation, you can contact a professional to repair it. For more serious deformation, the entire plastic steel window should be replaced.

2. If the sail is due to a problem with the installation, resulting in air leakage from the plastic steel window, then check that the wind leaks from the plastic window. If it enters the room through the gap between the window frame and the wall, it needs to be filled with sealant and it can be treated.

3. If the connection between the window frame and the window sash is not tight, resulting in air leakage, this is mainly due to the wrong hardware accessories. At this time, it is necessary to change the position of the hardware accessories, or replace the hardware with new ones.

Plastic steel window maintenance is not easy to leak skills

1. In the process of daily use, the plastic steel window should be protected by the necessary bend, and try not to let the heavy noise hit the plastic steel window, otherwise it is very easy to have scratches, which will affect the overall quality and is not conducive to long-term use.

2. If there are more stains on the plastic steel window, it is necessary to clean it up in time, otherwise a large amount of dirt is easy to accumulate on the plastic steel window, which increases the difficulty of cleaning and easily affects the quality of the plastic steel window.

3. When opening doors and windows daily, it is necessary to control the strength, and make the force when opening and closing the windows as suitable as possible to avoid damage. Moreover, it is necessary to prevent the window from hitting as much as possible, otherwise cracks will appear, which will affect the normal use in the later stage and cause air leakage in the room.

Kiss, <>

We're glad to answer your questions! Plastic window glass air leakage 1. If we find that there is a problem of air leakage in the plastic steel window, we first need to find the cause of the air leakage, that is, which part of the air leakage, so that it can be solved.

Most of them are due to problems left over from the installation process, such as air leakage in the window frame and door casing wall. 2。Find the gap first and choose to fill it with styrofoam.

Using styrofoam to fill the gap is more suitable for the phenomenon that the gap is not particularly large. However, if the gap is large, concrete needs to be used to fill the gap. After solidification, it can be effectively blocked, and there will be no more air leakage problems.

3。If the glass is ventilated around the perimeter, the gap between the glass and the window frame should be filled with sealant, and then the glass should be reinforced. The air leakage is also due to the aging problem of the sealant after a long time, which can be solved by replacing it in time.

Extended InformationGlass silicate non-metallic materialsGlass is an amorphous inorganic non-metallic material, which is generally made of a variety of inorganic minerals (such as quartz sand, borax, boric acid, barite, barium, barium carbonate, limestone, feldspar, soda ash, etc.) as the main raw material, and a small amount of auxiliary raw materials are added. Its main components are silica and other oxides. The chemical composition of ordinary glass is Na2SiO3, Casio3, SiO2 or Na2O·CaO·6SiO2, etc., and the main component is silicate double salt, which is an amorphous solid with irregular structure.

It is widely used in buildings to insulate wind and light, which is a mixture. In addition, there are colored glasses that are mixed with oxides or salts of certain metals to show color, and tempered glass that is prepared by physical or chemical methods. Transparent plastics, such as polymethyl methacrylate, are sometimes referred to as plexiglass.

The world's earliest glassmakers were the ancient Egyptians. Hope mine can help you! <>