The plastic steel windows at home are deformed and some air leaks, what should I do?

1.If the deformation is severe, it is recommended to replace it with a new one, because there is no repair value. 2.The deformation is not serious, and it can be repaired with some sealant.

I think it's because the material of the window you chose is not strong, so it's good to replace it with a new set of doors and windows, and then seal the glass cracks of the window with glue. There will be no more air leaks.

You can find a way to plug the air leakage of these plastic windows, or you can directly choose a plastic window and replace it again.

Just buy a new one and replace it. And the cost of this kind of window is not very affordable.

Summary. If you find that there is a gap between the window frame and the wall of the plastic steel window at home, air leakage is inevitable in this case, if you want to solve this problem, you can directly deal with the position of the gap, then fill the styrofoam, and then plug the position of the gap, and then make a modification to the surface, you can achieve the situation of not showing the wind.

The plastic steel windows at home are deformed and some air leaks, what should I do?

If you find that there is a gap between the window frame and the wall of the plastic steel window at home, in this case, air leakage is inevitable, if you want to solve the problem of early defeat, you can directly deal with the position of the gap, and then fill the styrofoam, and then plug the position of the gap, and then make a modification to the surface, you can achieve the trembling situation of not Lu Huai dew.

If my answer is helpful to you, please also give a thumbs up (in the lower left corner of the ambush brigade into the Yu Hall annihilation evaluation), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that my answer is still satisfactory, you can click on my avatar to consult one-on-one. Finally, I wish you good health and a good mood!

Use sealant strips.

Prepare materials: scissors, sealing tape.

Specific steps: 1. Determine the location of air leakage, where the gap is taken as an example of the position of aluminum alloy edging and window frame edge;

2. After the window gap is determined, select the raw edge banding strip of the same color and length according to the color of the window, and make sure that the window frame is on it before pasting, so that it is more beautiful.

3. Uncover the back glue, paste the intercepted edge banding strip on the inside of the frame, and press it back and forth with your hand after pasting, so that the edge banding strip is fully bonded with the inside of the frame, and you can close the window and feel the effect after pressing.

1. If the ventilation is caused by the deformation of the window, then it is necessary to determine the degree of deformation of the window. There is only a slight deformation of the window frame or sash, at this time, you can ask a professional to repair it, and the middle lock can generally solve the deformation problem. However, if the plastic steel window is seriously deformed and cannot be repaired, it must be replaced as a whole to completely solve the ventilation problem.

2. If the window ventilation problem is caused by non-standard installation, first look at the wind coming in from the first place. If it comes in from between the window frame and the wall, it means that the connection between the two is not tight enough. Or if there is a crack, then a sealant can be used to fill it.

3. If the ventilation is caused by the poor connection between the window frame and the window sash, it is often caused by the dislocation of the hardware accessories during installation, and the position of the hardware must be adjusted or replaced with new hardware to solve the problem of household ventilation.

The air leakage of plastic steel windows in <> buildings can be solved by installing plastic film, cleaning grooves, gluing gaps, and installing curtains. When it comes to installing plastic film, you don't have to worry too much about the thickness of the plastic film, because it is not breathable, so it can block the wind, as long as it is firmly installed around it. Regarding cleaning the recess, the window leak may be due to the debris in the recess that prevents the window from being closed tightly, so it needs to be cleaned.

Regarding adhesive gaps, it is necessary to check the windows for cracks, which can be repaired with glass glue. Regarding the installation of curtains, you can hang a heavy layer of curtains on the windows, which is both beautiful and can block the cold wind.

1. See what causes the window to leak, if the window gap is too large, you can use sealant to fill the gap, so that the air will not enter.

2. If the size of the glass is useless, it may also be as if the glass is not used to reinforce, shaking back and forth, and it will naturally enter the air, at this time, you can also use sealant to fill the gap between the glass and the window to strengthen the glass.

3. If you feel that the window glass is getting air, you can hang heavier curtains, which will block part of the wind and make the house feel warmer.

4. The current window materials are mainly broken bridge heat-insulated aluminum and plastic steel windows, and aluminum alloy doors and windows have been gradually eliminated due to their poor sealing performance. But even if you buy plastic steel windows and broken bridge aluminum windows, you should also pay attention to the material. If the material is poor, the window will be deformed after two or three years of use, and once it is deformed, the sealing performance will be poor, and air leakage will occur, so this also reminds the owner to pay special attention to the material when buying windows.

If the window of your house is because of this air leak, you can only find the window manufacturer to explain and decide.

5. If the gap of air leakage is left over from installation, the best measures to be taken are to clean up the gap between the window frame and the door sleeve and the wall, stuff it with styrofoam, and then fill the gap with cement and sand, and then repair it.

6. Another important reason for window leakage is the failure of the sealing fittings. The common thing is that the sealing strip is aging and cracking, which directly leads to the deterioration of the sealing performance of the window; Another is that the styrofoam is too soft, and it will be pulverized after a few years of use, and the gap between the window frame and the wall will become larger, resulting in air leakage.

The air leakage of plastic steel windows can be treated as follows:

1. Glue to seal the gaps in the windows

If the window is leaking because there is a gap between the window frame and the wall, you need to glue the window gap. If the gap is large, it will also need to be filled with styrofoam before being treated with sealant.

2. Adjust the installation of hardware accessories

Some plastic steel windows are not installed with hardware accessories during installation, and the hardware does not achieve a good locking effect, so the hardware lock needs to be adjusted. Even if the window leakage is too serious, it is necessary to replace it with new hardware accessories.

3. Correct window deformation

It is well known that plastic steel windows are easy to deform, and if the air leakage of Zhengtong windows is caused by the deformation of the windows, the windows need to be corrected. In addition, for the severely deformed plastic steel windows, they need to be replaced.

4. Seal the diagonal part of the window strip

The window frame of the plastic steel window has a drainage system, and the outer drainage hole is connected to the cavity where the insulating glass is placed, and cold air will enter the glass cavity along the drainage hole. Window air leakage can also be caused by air leakage at the opposite corner of the window strip. At this time, it is necessary to seal the diagonal part of the bead with sealant.

5. Replace the aging rubber strip

If the window is leaking due to the aging of the window adhesive strip, it is necessary to replace the adhesive strip with a new one.

How to maintain plastic steel windows that are not easy to leak:

1. In the process of daily use, the plastic steel window should do the necessary protection work, and try not to let heavy objects hit the plastic steel window, otherwise it is very easy to have scratches, which will affect the overall quality and is not conducive to long-term use.

2. If there are more shouting stains on the plastic steel window, it is necessary to clean it up in time, otherwise a large amount of dirt is easy to accumulate on the plastic steel window, which increases the difficulty of cleaning the plastic steel window, and is easy to affect the quality of the plastic steel window.

3. When opening doors and windows daily, it is necessary to control the strength, and try to make the force when opening and closing the windows to avoid damage. Moreover, it is necessary to prevent the impact of the window as much as possible, otherwise cracks will appear, which will affect the normal use in the later stage and lead to indoor air leakage.