The new Focus Style gauge shows whether the fuel consumption is the average of the whole or the last

The driving habits are different, the road conditions are different, the traffic jam, the load, the oil, the hot and cold air, whether the run-in period of the old car is different, and the fuel consumption is not the same. It is recommended to calculate it yourself according to the following method:

1.According to the trip computer on the car. Generally, better cars have a trip computer with real-time fuel consumption and average fuel consumption.

When you want to calculate fuel consumption, empty the data inside, and the average fuel consumption read is more accurate. Some cars do not support the driving computer or the computer does not support clearing data, so the second method can only be used.

Some people also say that the data calculated by the driving computer is inaccurate. But the amount of fuel is controlled by the car, and the car can also know the number of kilometers, so why is the data inaccurate? Therefore, the data calculated by the driving computer should still be reliable.

2.Each of the following steps is required to be strictly implemented, otherwise the calculated fuel consumption may not be accurate. When refueling first, add until you jump the gun, don't refuel at this time, and record the kilometers at this time.

Why is this method more accurate to calculate fuel consumption, because the size of the fuel tank of the car is fixed, and the fuel gun is also standard, so when it is added to the jump gun, basically the amount of fuel in the fuel tank is fixed, so we can use this method to ensure the accuracy of fuel consumption calculation to the greatest extent.

Average fuel consumption is the average fuel consumption that shows the last hundred kilometers.

The method of Focus fuel consumption display: there is a SET button in the middle of the turn signal lever, the car key is connected to the power, press and hold it without loosening, wait for about 3 5 seconds to enter the test mode, and then press the SET button continuously for 26 or 27 times, fuel consumption can be displayed.

Ways to save fuel in your car:

1. Follow the recommended methods in the car maintenance and repair manual, and a well-maintained car will be more fuel-efficient to drive.

2. Dirty spark plugs and dirty air filters will reduce fuel economy. Therefore, it is necessary to replace the spark plugs regularly and clean the air filtration.

3. Maintain proper tire pressure. If the tire pressure is too low, it will be more fuel-intensive, so you need to check the tire pressure frequently.

The lever of the turn signal on the left, there is not a rotation on it, you dial it, it will show fuel consumption, mileage, how much mileage can be driven, average speed, temperature. Mine is 07 model, I don't know if it has changed now.

To enter the project mode to view.

To do this, insert the key and hold down the steering lever with your left hand"set/reset"button, while the key goes from 0 to 2 and holds it for a few seconds until the trip computer display in the instrument cluster appears"test", and you have successfully entered the engineering mode. Then you can press it one by one"set/reset"to view the data in the driving computer.

At the end of the turn, there is a RAFE project, which is the average fuel consumption.

The lever of the turn signal on the left, there is a button at the end of the lever, press and hold, turn the car key to the position before the ignition, pause for 5 seconds, and then turn the key to light the ignition (during the above process, the button has been held down). After getting on the car, the driving computer displays the word test, press the button continuously, the word switch, when the word RAFE appears, the displayed parameter is fuel consumption! If you want to exit this mode, press and hold the button for about a few seconds and the trip computer will recover!

If there's anything unclear, ask me again!

After 09, there is no average fuel consumption shown, but you can use these data to calculate it yourself before and after refueling: the number of kilometers you can run before refueling; After refueling, it can run kilometers b; refueling volume c (liters); The formula is c (b-a) 100 = liter 100 km.

1. First insert the key of the classic Ford Focus vehicle and make the key in the 0 position.

2. Next, press and hold the "Set Reset" button on the light control handle of the classic Ford Focus vehicle with your left hand.

<>7. Finally, the classic Ford Focus vehicle display screen can show fuel consumption for 100 kilometers.

1. First, insert the Changan Ford Focus vehicle key and screw it to the 0 position.

2. Next, press and hold the "Set Reset" button on the light control handle of the Changan Ford Focus.

3. Next, screw the Changan Ford Focus vehicle key to the position of II.

4. When the following interface appears on the dashboard of Changan Ford Focus vehicles, you can release the button on the light control lever.

5. Next, you need to press the "SET RESET" button on the light control lever of Changan Ford Focus vehicle continuously, and you need to pay attention to pressing it once and again.

6. At this time, the instrument panel of Changan Ford Focus will display various parameters.

7. Finally, the average fuel consumption information of Changan Ford Focus vehicles appeared.

The method is: press and hold the set reset key and do not move, insert the key to go to the gear position, until the trip computer shows test, enter the engineering mode, press the set key directly, check one by one, and see "rafe*". L", and then press and hold SET to exit the engineering mode.

The average fuel consumption of the new Focus manual transmission is generally within 8, and the automatic transmission is about 8 slightly higher than the manual transmission, in addition, the new Focus has advantages in handling and power, and the advantages of Langdong are mainly reflected in the space and comfort are better, and other aspects are not as prominent as the new Focus. Each car has its own advantages and disadvantages, and if you prefer its advantages, you can also accept its shortcomings.

Excuse me** how good is the Fox normal oysters.

The 2019 Focus sedan is equipped with a naturally aspirated engine with a maximum power of 90 kW, a maximum horsepower of 122 PS, and a maximum torque of 153 Nm. Comprehensive fuel consumption of the Ministry of Industry and Information Technology.

Constant velocity fuel consumption refers to the fuel economy index of the car when driving at constant speed on a good road surface. Because constant speed driving is a basic working condition for cars to run on the road, and this fuel consumption is easy to measure, it is widely used. However, due to the fact that the car often accelerates, decelerates, brakes and idles in the actual driving and other working conditions, so the constant velocity fuel consumption is often low, and the actual fuel consumption is quite different.

The difference is even greater for cars that often travel short distances in the city. Road circulating fuel consumption is the fuel economy index measured by the car on the road in accordance with the specified speed and time specifications for repeated cycle driving, also known as multi-condition road cycle fuel consumption. In the wide sliding range of the speed and time gauge, it is specified that each cycle contains various driving conditions, and the shift time, braking and stopping time, as well as the driving speed, acceleration and braking deceleration values in each cycle are specified.

Therefore, the fuel economy measured in this method is relatively close to the actual driving situation of the car.

As follows:

12 new Iwahiro Focus manual transmissions.

The dashboard does not have a fuel consumption gauge. There is basically no comprehensive fuel consumption in the 12 models, and there may be instantaneous fuel consumption, which can only be calculated by refueling and kilometers. Ford has not installed a driving computer for the time being, and it is impossible to view it for the time being.

The instrument shows the gear prompt, the temperature outside the room, the size and mileage, and the old Focus low-profile version is not as strong. The fuel consumption of the previous model can also be seen in engineering mode. The 12 manual comfort can not be displayed, the manual fashion can be displayed, because it needs the button adjustment display on the multi-function steering wheel, and the comfort should not have a multi-function steering wheel.

12 Focus automatic transmissions.

What is the fuel consumption?

The fuel consumption of this car is generally around 7 gas. The fuel consumption of the automatic transmission is significantly higher than that of the manual transmission, and the transmission.

The maintenance cost is high and the service life is short. However, if there are many cars, it will be troublesome to turn on the manual transmission. If there are not many cars, then the manual ones are fuel-efficient.

Fuel consumption per 100 km.

It refers to the fuel consumption of a vehicle driving 100 kilometers on the road at a certain speed. It is a theoretical indicator of the vehicle. 100 kilometers of fuel consumption is the manufacturer in the objective environment, with the vehicle chassis installed in the dynamometer measured value measured into the speed parameters, and then specify the speed to drive, calculate the model of the theoretical experiment 100 kilometers fuel consumption data.

Yes

On the left side of the steering wheel, you can switch between instantaneous fuel consumption, average fuel consumption, and mileage. The above information is displayed on a small screen between the speedometer and tachometer.

Fuel consumption, constant velocity fuel consumption: Constant velocity fuel consumption refers to the fuel economy index of the car when driving at constant speed on a good road surface. Because constant speed driving is a basic working condition for cars to ride on the road, and this fuel consumption is easy to measure, it is widely used.

However, due to the fact that the car often accelerates, decelerates, brakes and idles in the actual driving and other working conditions, the constant speed fuel consumption is often low, and the actual fuel consumption is quite different. The difference is even greater for cars that often travel short distances in the city.

Road Cycle Fuel Consumption: Road Cycle Fuel Consumption is the fuel economy index measured by the car on the road in accordance with the specified speed and time specifications for repeated cycle driving, also known as multi-condition road cycle fuel consumption.

In the speed and time specification, it is specified that each cycle contains various driving conditions, and the shift time, braking and stopping time, as well as the driving speed, acceleration and braking deceleration values in each cycle are specified. Therefore, the fuel economy measured by this method is relatively close to the actual driving situation of the truck scale.