The new Focus air conditioning duct is flushed with water

What does LZ want to express? Do you clean air conditioning ducts? If you want to clean, there is a special air conditioning air duct cleaner, which is very effective and inexpensive, or go directly to the car beauty shop to clean, dozens of dollars.

Air conditioning cleaning is divided into several parts, the first is condenser cleaning, first using high-pressure air to blow out catkins, insect carcasses, dust, etc. from the inside out, and then rinsing with clean water. Absolutely no high-pressure water cannons! Remember!

If necessary, the tank or condenser screws need to be loosened so that they can be cleaned thoroughly. For evaporation tank cleaning, generally use special chemicals, and then rinse with clean water, remember to check the air conditioning water outlet to prevent the cleaned booty from blocking the water outlet. Check and replace the pollen filter of the air conditioner (except for vehicles that do not have it) Air duct cleaning:

Buy a bottle of foam cleaning disinfectant "Household Car Air Conditioner Cleaner". Ignition, turn off the AC button of the air conditioner, use external circulation, open to the maximum air volume, use the head gear in the direction of the air outlet (that is, do not blow to the feet), and then insert the catheter into the cleaning agent and shake it vigorously several times, spray foam into the air inlet in front of the co-pilot, spray how much you can control, pay attention to the foam sprayed at the air outlet at this time, and use a cloth to be ready to dry the foam at any time. After completing the above steps, continue to blow high air volume for about 10 to 15 minutes, then turn off the air, turn off the heat, and let the dirty water drain from the drain pipe of the air conditioner.

FYI, hope best, thank you.

Hello, it's better not to rinse with water, if my answer is helpful to you, please set to.

Landlord, it's better not to rinse with water, I hope mine will help you.

The specific operation steps for adding water to Fu Zi Fiber Key Fox are as follows:

1. Press the one-button start button of the Ford Focus to turn off the engine.

2. Let the engine of the Ford Focus cool down to room temperature naturally.

3. Pull the switch handle on the front hood of the Ford Focus.

4. Lift up the front hood of the Ford Focus.

5. Slowly unscrew the lid of the small kettle of the Ford Focus's water tank and release the pressure.

6. Add water to the max line vertical stove of the small kettle, that is, complete the operation.

The specific operation steps for Ford Focus water filling are as follows:

1. Press the one-button start button of the Ford Focus to turn off the engine.

2. Let the engine of the Ford Focus cool down to room temperature naturally.

3. Pull the switch handle on the front hood of the Ford Focus.

4. Lift the front hood of the Ford Focus upwards.

5. Slowly unscrew the lid of the small kettle of the Ford Focus's water tank and release the pressure.

6. Add water to the max line of the small kettle to complete the operation.

Antifreeze is generally to go to the 4S store for maintenance is someone to add to you, you can also buy your own antifreeze to add (add water is also OK), antifreeze pot is the "red liquid" pot in the upper left corner of the engine. The wiper kettle is next to the front bumper, and there is a wiper symbol on the cover, and if there is a glass of water, add a glass of water (you can also add water).

The wiper water tank is on the left side of the fender, add some water and drop a few drops of detergent.

Antifreeze?

Generally, don't add it.

If the water level is below the min, you can add a little pure water to it.

The structure of the Fox tank itself is automatically discharged. The radiator in the engine water cooling system is composed of three parts: the water inlet chamber, the water outlet chamber, the main piece and the radiator core. The steps to add water to the car water tank are as follows:

1. Turn the pressure cover in a counterclockwise direction, if you hear a hissing sound, wait until the sound disappears before opening it;

2. Fill an appropriate amount of coolant into the coolant expansion tank to reach the position between the max and min scales of the expansion tank;

3. Start the engine when the coolant expansion tank cover is opened;

4. After starting the engine, the coolant in the tank will be slowly reduced, and then add an appropriate amount of coolant to the expansion tank until the liquid level reaches the position between max and min degrees of the coolant expansion tank;

5. Reattach the lid and make sure the pressure cap is tightened by hand and fully seated. Sen or.