Can a civil meter be used for manipulation? I feel that the meter of the rented house is going so fa

Updated on society 2024-07-15
10 answers
  1. Anonymous users2024-02-12

    There are two kinds of watt-hour meters: mechanical watches and electronic watches, mechanical watches are very good to do tricks, as long as the upper cover is opened and his gears are staggered, you can use electricity and not go. The electronic watch is difficult to get, and the situation you said is either stolen by others, or the meter is inaccurate. It is recommended that you check whether the circuit from the meter has stolen electricity, and if not, change the meter!

    Nowadays, there are many problems with renting a house meter, which are generally not obvious, but they are faster than the speed of normal households. There are a lot of ways to do this, and if you want to do it yourself, you can reverse the wires that come in and out, causing them to reverse, but that's not very safe. After all, you are not an electrician, and the meter is generally sealed with lead, and if you open it, you will be fined if there is an electrician meter.

    It is recommended that you find a property manager to help you get it. And I have felt this way before, but after measurement, I know that the feeling is wrong, that is, your power consumption is indeed large, not that you feel that you use more than you actually use, but that you use so much, such as the computer uses extra electricity and so on.

    There should be no problem with the meter, or find the cause from the internal electrical appliances to see if there is any change, and it is more obvious if there is a problem with the meter.

  2. Anonymous users2024-02-11

    If you don't use electricity, you don't turn it, so there's nothing wrong with it. There are several types of speed at which the meter travels. Saving first, safety first!

  3. Anonymous users2024-02-10

    It's just that the table is inaccurate. There are two kinds of watt-hour meters: mechanical watches and electronic watches, and the situation you said is not stolen by others, and mechanical watches are very good to do. It's hard to get an electronic meter, so if you don't have one, change it.

    It is recommended that you check the circuit coming down from the meter to see if there is any electricity stealing, as long as you open the upper cover and stagger his gears, you can use electricity without leaving.

  4. Anonymous users2024-02-09

    Do the math how much it will cost you to renovate your home

    In life, it is common to hear tenants complaining that the electricity meter in the landlord's home is moving fast, and the large household appliances are rarely used in the rental house, so how can the meter go fast? And the monthly electricity sales fee is also very high, I don't know what the reason is, I feel very confused, worried about whether the landlord has done something on the meter. Next, I will introduce to you the reasons why renting fiber makes the meter go faster.

    The reason why renting a meter is going fast.

    One of the reasons: the meter goes fast, first to see what type of meter is rented, there are generally two kinds, one is that the new type of smart electronic meter is not easy to control, and the other is that the mechanical meter is more sensitive and more accurate. In the past, the mechanical watch has been used for a long time, there will be some aging and wear, so it is easy to lead to errors in the watch, the mechanical watch needs a certain starting current, and can be controlled by some strong magnets, so it is more necessary to pay attention.

    Reason 2: Now the new smart electronic meter mainly relies on the pulse number display, just like the TV standby and the plug will go as usual; Mechanical meters, on the other hand, will not go to the meter even if the appliance is on standby and the plug is not unplugged, so tenants will feel that the meter will be destroyed faster than before.

    Reason 3: It may also be because some electrical appliances at home will consume more electricity, resulting in an increase in voltage, which will also cause the meter to go faster, or think that the voltage is controlled, which will also cause the rental meter to go faster. Generally, the voltage fluctuation fluctuates at 220V to 237V, which is within the normal range, but if the voltage exceeds 237V, it means that the voltage fluctuates quickly, and the meter moves faster, so it is good to detect whether the electrical appliances at home are aging and consume electricity.

    Conclusion: The above content is an introduction to the reasons why the rental meter is fast, I hope it can help you. I believe that after the above content, you will have a better understanding of the 3 main reasons why the meter is faster, and if you encounter such problems in the future, you can refer to it first.

    Enter the area and get the decoration for free**].

    Enter the area and get the decoration for free**].

  5. Anonymous users2024-02-08

    They may change meter settings without authorization to use more electricity without being penalized for dismantling the mill. They can also change the billing rate of the meter without authorization to get more benefits. 2. How to avoid meter landlords from manipulating?

    1. When renting a meter room, the landlord should be required to issue a formal written contract and record the accurate readings of the meter. 2. Check the readings of the meter regularly and check whether they are consistent with the previous readings, so as to detect abnormalities in time. 3. Regularly check the installation and setting of the meter to ensure that the meter has not been changed without authorization.

    4. If it is found that the landlord of the meter has changed the meter without authorization, it should be reported to the local ** agency immediately for timely processing.

  6. Anonymous users2024-02-07

    Do the math how much it will cost you to renovate your home

    There are many problems when renting a house, for example, some people find that in the process of renting a house, the meter goes very fast, so what is the reason for this? Is it the landlord who has done something and how can we solve it?

    1. Why does the rental meter go faster?

    1. If it is a collective electricity meter, such as you share a house with other people, if your own electricity consumption is not particularly large, it may be that other tenants use more electricity, such as some large-power electrical appliances at home, especially electric water heaters, or air conditioners in summer, which will also cause the meter to go faster and use more electricity.

    2. If the electricity consumption of individuals or other tenants is not particularly large and relatively economical, then it is possible that the landlord has done something on the meter, and we can ask a professional electrician to check it.

    3. It is also possible that there is a problem with the meter, after all, there is a certain service life, if the service life is reached, the parts fail, and the data read out of the meter is not accurate, and the meter will go very fast.

    Second, how to solve the problem of renting a meter quickly.

    1. First of all, it is necessary to find out what is the cause, if it is because the electricity consumption at home is relatively large, especially in summer, open the refrigerator, turn on the air conditioner or use the water heater to take a bath, these skills and knowledge of the situation are relatively large, and the natural electricity consumption will be relatively high. If you want to save electricity, you need to turn off some unnecessary appliances so that you can save electricity.

    2. If the meter goes fast because the landlord has done something, we can directly reason with the landlord to replace the meter with a new one, and these expenses can be funded by the landlord and he will be held responsible.

    3. If the meter is damaged and the shelf life has passed, it can only be replaced with a new meter, which needs to be arranged by a professional electrician.

    3. How to save electricity.

    1. If you want to save electricity, you must start from some small things around you, such as household appliances that need to be unplugged when they don't need to be sold. Many of us unplug the charger in time when charging our mobile phones, and the same is true for other electrical appliances.

    2. Whether it is summer or winter, the temperature of the air conditioner should not be too high or too low, and the temperature of the air conditioner should be set at 26 degrees to save electricity.

    Summary: If you find that the meter of the rented house is moving faster, we need to find out what is causing it, it may be that the electricity consumption at home is relatively large, or there is a problem with the meter.

    Enter the area and get the decoration for free**].

  7. Anonymous users2024-02-06

    If you live in a rented house outside, you need to know how to read the electricity meter clearly. How to solve the problem that the rental house meter is going too fast? pchouse will take you to understand it.

    1. Observe the flashing of the pulse indicator on the electric surface disk.

    Cut off the main switch in the distribution box at home or unplug all electrical equipment at home, make sure that there is no equipment in the electricity, observe the flashing of the pulse indicator light on the surface disk, generally within 10 minutes without flashing or only flashing 1 time, the answer to the electricity meter is running normally. If the indicator flashes multiple times, the meter is not operating properly.

    2. Turn on an electrical equipment with relatively stable power and observe the metering value.

    Turn off all electrical appliances in the home, record the degree displayed by the meter, turn on an electric water heater or rice cooker for a period of time and turn it off, record the meter display degree at this time, and subtract the two degrees to get the electricity consumption of the device just turned on. According to the power marked on the nameplate of the equipment, the power consumed by the equipment is calculated and compared with the electricity recorded by the meter, and the amount of electricity measured and cleared by the meter is judged to be normal.

    3. Calculate and judge the total electricity, peak electricity and valley electricity displayed by the transcription meter.

    At the same time, the total electricity, peak electricity and valley electricity values displayed by the meter are copied, such as when the value of the peak electricity and the valley electricity are equal to the total electricity, the meter measurement is normal, and vice versa.

  8. Anonymous users2024-02-05

    Summary. Hello, strictly speaking, the landlord may do things on the meter, for example, he may connect the wires to your meter privately, so that when he uses electricity elsewhere, it will be recorded on your meter, and it is also possible to do things directly on the meter to make the meter display more than the actual use, but the behavior of pulling the wire and modifying the meter without permission is prohibited by the state, and it is an illegal act, and if it is violated, it will be legally responsible.

    Hello, strictly speaking, the landlord may do tricks on the meter, for example, it may sell the wire to your meter, so that when you use electricity elsewhere, it will be recorded on your meter with a comma, or it is possible to do things directly on the meter to make the meter display value more than the actual use, but the act of pulling the wire and modifying the meter without permission is prohibited by the state from selling and collapsing, and it is an illegal act, and if it is violated, you will be legally responsible.

    Hello, strictly speaking, the landlord may do tricks on the meter, for example, it may sell the wire to your meter, so that when you use electricity elsewhere, it will be recorded on your meter with a comma, or it is possible to do things directly on the meter to make the meter display value more than the actual use, but the act of pulling the wire and modifying the meter without permission is prohibited by the state from selling and collapsing, and it is an illegal act, and if it is violated, you will be legally responsible.

  9. Anonymous users2024-02-04

    No, you can't

    Now generally speaking, the use of new water and electricity meters, not professionals are not renting pure, the most commonly used method is to secretly pull the room for other use, you can turn off all the electricity in the room, but do not close the gate, and then see if the meter is still turning, if there is a turn, there is a problem.

    Theoretically, a 1 kilowatt appliance consumes 1 kilowatt-hour per hour, but in practice it consumes less than 1 kilowatt-hour. Calculation method of the energy meter. = 1 kWh, that is, 1 kWh of electrical appliances consumes 1 hour of kWh. If it is 100 watts, it will take 10 hours, and it will also take 1 degree.

    If the degree of the meter reading is the degree of the last meter reading = electricity consumption, if the meter has a current transformer, it depends on the change ratio of the current transformer when calculating the electricity consumption. If the strain ratio is 100:5 transformer, the calculation method is the degree of the last meter reading when the meter is read) x 100 * 5 = actual electricity consumption.

    How to prevent renting a house from being cheated on electricity bills?

    1.Nowadays, rental houses have independent electricity meters, so in order to prevent the landlord from cheating the electricity bill, the tenant agrees with the landlord when signing the lease contract and how to pay the electricity bill. In fact, rent and pay the electricity bill yourself, not through the landlord.

    In addition, when renting an apartment, the exact data of the meter should be indicated in the contract. You can then view the meter data every month and pay the electricity bill through WeChat or Alipay or the power supply bureau. This way you can avoid being scammed by your landlord.

    2.If it is a grouped meter, there will also be a grouped meter. Tenants add meter data every month to check whether the meter data is correct to prevent landlords from fraudulently obtaining electricity bills.

  10. Anonymous users2024-02-03

    Hello dear, glad to answer for you, <>

    Meter landlords can do tricks. It is illegal for the landlord to speed up the meter: if you change the point without permission, it is illegal to do so, and you will be punished.

    The landlord is not allowed to adjust the meter faster, and it is illegal to adjust the meter faster, and if it is serious, it will bear legal responsibility. The same as the meter, there is a calibration button, so the speed of the meter can be adjusted, but it will be inaccurate after the adjustment, so it is strictly forbidden to adjust the meter privately after calibration. In the case of high voltage or high current, the energy meter cannot be directly connected to the line, and needs to be used with a voltage transformer or a current transformer.

    If you rent a house with an electronic meter, then the landlord can not adjust the meter faster, because this kind of meter can only be controlled by the staff of the power bureau, if you use the old meter, then the landlord is likely to adjust the meter faster, if you want to know whether the landlord Xian Town has adjusted the meter faster, in fact, you can test it in a very simple way. Before going to bed at night, you can turn off all the electrical appliances in the house, and then look at the current meter number, and wake up on the second morning to see if the meter number has changed, if it has changed, then the landlord has turned the meter faster. Thank you for your consultation, I hope this service can help you, you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again.

    I wish you a happy life, a happy family, good health, and all the best <>

Related questions
6 answers2024-07-15

According to the current policies and business rules, if you are a customer within the service scope of Guangdong Power Grid Company, the information required for the application and installation business is as follows: >>>More

12 answers2024-07-15

Reading method: according to the size of the measured resistance, the watch hand stops at a certain position of the ohm scale mark (the top one marked with a scale mark), observe the value indicated by the watch hand at this time, and then multiply by the gear where the gear selector switch is located, that is, the resistance value of the resistor. >>>More

21 answers2024-07-15

Hehe, in fact, the difference is that the price of electricity is different. You think, in the city, many residents use the same transformer for electricity and factories use electricity, what can be the difference between the two? According to China's national regulations, the low-voltage power supply itself is 380 220, that is, the voltage between the two live wires is 380V, and the voltage between any 1 fire and the neutral line is 220V. >>>More

13 answers2024-07-15

1. To correctly select the gear of the meter, select the current gear for current measurement, select the voltage gear for voltage measurement, and select the resistance gear for resistive measurement. >>>More

16 answers2024-07-15

If you are a customer of Guangdong Power Grid Company, you can pay the electricity bill through WeChat, which is convenient and fast. >>>More