Is the yellow painting on the wall of the new house decoration called the wall solid? Do you have to

Do the math how much it will cost you to renovate your home

1. Enhance adhesion.

After the white wall of the new house is removed, the wall will be covered with a lot of dust, or the concrete wall is easy to sand and depowder, so before the formal construction, it is necessary to apply a layer of wall solid, which can increase the adhesion of the putty and make the wall more firmly bonded with the putty.

2. Anti-cracking.

If the base layer is not treated well, then even if the construction technology of the workers is good, the wall is also prone to cracking and other problems, so in order to avoid the cracking of putty and latex paint in the later stage, before construction, it is necessary to brush a layer of wall solid on the wall to prevent cracking.

3. Moisture-proof, mildew-proof and alkali-resistant.

The kitchen is relatively wet and dirty, so many people will paste tiles in a large area in order to facilitate cleaning, and before pasting tiles, they must apply a layer of wall solid, so that not only the wall can be better pasted with tiles, but also can play a moisture-proof and mildew-proof effect, which can avoid problems such as mildew and alkali on the wall in the later use.

4. Keep the image of the construction site beautiful and tidy.

Wall solidification is simply a wall curing glue, which is an adhesive between the wall and auxiliary materials, and its color is generally yellow, which can be applied to the wall to make the wall more beautiful and tidy.

Enter the area and get the decoration for free**].

Enter the area and get the decoration for free**].

Is it? Do you have to brush it? Whether the walls need to be painted or not should be determined according to the condition of each house.

Many new deliveriesCommercial and residential buildingsIn fact, it is not necessary to paint the wall, because now real estate developers are becoming more and more standard, and the raw materials used are becoming more and more standard. In the process of building a new house, there are many monitoring units, and a series of tests must be carried out on the house. Therefore, for a new commercial and residential building, the quality of the general house can be passed.

If you find that the walls of the house are not powdered or hollow when you pick up the house.

phenomenon, so most of them are not necessarily painted wall solid.

However, some houses have just been delivered to the wall and the powder is very serious, and this is already a product quality problem, which may not be solved by painting the wall, and it is necessary to find a real estate developer to negotiate and solve it. Some people have bought a house for many years, and there has been no interior decoration, until when they want to decorate later, they find that there is delamination in the mixed mortar layer. Just a slight delamination, that can be brushed wall solid.

If the delamination is very serious, in fact, it is useless to paint the wall, and the effective method has to be shoveled and redone.

General wall curing agent.

Brush once or twice, and the second time is also to prevent missing brushing. Painting wall solid also has its correct construction process, which should be placed after the hydropower transformation and before the wall leveling process. In addition, when making wall solidification, it is also necessary to pay attention to protecting the finished products (flooring, furniture) in the room to avoid pollution caused by wall solid dripping.

Therefore, it is not a panacea, and there is no way to deal with some root causes, and can only be rescued on the basis that the problem is not very serious. If the problem is already very serious, then even if you brush it, it will not help. But you will find that the decoration company is going to recommend that you brush the wall, mainly because if you paint it, the decoration company.

is even more profitable.

So sometimes you can't fully listen to the decoration company, and you need to have some judgment of your own. Just like all decoration companies, they will hope to transform the hydropower projects of the owners of the community, but in fact, the hydropower projects of many commercial houses do not need to be renovated.

The yellow thing painted on the wall of the new house decoration is called the wall solid, and this thing must be brushed!

Wall solid is actually a kind of adhesive, after brushing can increase the adhesion of latex paint and other products, to ensure that it does not fall off in the later stage, so it is necessary to brush the wall solid.

This substance, called wall solidification, has a great effect and must be brushed when decorating. It can play a role in isolating the wall, can be good moisture-proof, and can also make the tile more durable.

Yes, this is indeed very important, and it must be brushed, so that it can be better decorated.

The yellow painting on the wall of the new house decoration is called the wall solid, and it must be brushed. In fact, it is a kind of curing glue, waterproof putty, and waterproof sealant is a little similar, itself has no color or milky white, in order to better highlight the actual effect, in the use of yellow or emerald green paint paste added, for why it is generally tuned to yellow, one is that yellow is more eye-catching, and yellow is very easy to be covered by the wall putty in the middle and late stages, and it is not easy to produce color return, such as red, and the putty in the middle and late stages may not be covered. To be precise, the wall and ground solid is indeed useful, the wall solid has strong water permeability, and the surface of the engineering building with the wall solid can effectively improve the adhesion and bonding strength of the bottom layer.

Another effect is to avoid dust and dust on the concrete.

In other words, before we prepare the wall tiles or scrape putty powder in advance, if the wall surface is too smooth or the adhesion is weak, we can use the wall solid to carry out calendering to improve the adhesion. In fact, the walls that are already relatively dry do not need to be painted. Brush time, the appropriate length of time to brush the wall should be before scraping putty powder, not a start to brush, because the first process of interior decoration is to open the line groove, if the wall is brushed in advance, and then the line groove will undoubtedly be destroyed, so in the area of the line groove if the solution is not very good, it is very easy to crack.

If you ask the construction team, maybe he will answer you, this is to avoid hollowing out the floor tiles. Troublesome, when sticking to the floor tiles, it is necessary to apply a layer of dry slurry to level the ground first, and then apply wet slurry to pave, and the gas in the wet slurry is not immediately discharged before the wall is hollow. Although the wall can be applied with water, it is different at this stage to be done, and the proportion of water is completely different.

For example, if it is to better dry the smoke and dust of the wall, you can add water moderately, accounting for 30% of the total, and no more than 50%.

Yes, if the wall is solid, he must be painted, then this can also allow us to use it for more time, otherwise, the wall will also fall off.

When the new house is decorated, the yellow thing painted on the wall is called the wall solid, if the wall is to be decorated, then the wall must be painted.

Yes, it must be brushed, this is to highlight the effect, and it is also so that it is not easy to return color. There is also a strong dehydration.

In this case, there is a blind stool. The reason for the inherent yellow color of the decoration wall is mainly due to the aging and oxidation of latex paint, as well as the accumulation of dust. The resin, pigment and other components contained in latex paint, under the action of sunlight, will gradually lose stability and produce oxidation reaction, so that the color of the wall will gradually turn yellow.

At the same time, dust and dirt in the air will also adhere to the wall, further deepening the yellow color of the wall.

Here are some things you can try to improve:

1. Clean the walls regularly to remove dirt and dust.

2. Choose the best wall material.

3. Improve the ventilation and humid environment of the Lushan room.

4. Brush latex paint regularly to keep the color of the wall fresh and clean.

Hello, Xiao Tian'er answers!

Whether to brush the wall or not, it depends on the situation!

The wall solid has good permeability, which can fully infiltrate the surface of the wall base material, improve the interface adhesion, and the bonding strength of the mortar or putty with the wall, and prevent hollowing, cracking and falling off.

The role of wall solidification.

Prevent sand and dust

The wall of many blank houses is made of concrete potato imitation soil, the problem of sand and depowdering of the wall is very serious, if the ruler hand which is brushed putty and latex paint, too much dust can easily lead to hollowing of the wall, falling off and so on.

The high adhesion of the wall can reduce the sand and dust of the wall during construction, so that the sand and dust are well sealed on the wall, increase the adhesion of other materials to the wall, and better adhesion when brushing putty and latex paint in the future, and also make the wall more flat and smooth.

Moisture-proof, mildew-proof and alkali-resistant

For bathrooms, kitchens and other spaces that are prone to dampness, the walls are generally paved with tiles, the walls have a certain moisture-proof performance, and have a good alkali resistance and mildew resistance, which can effectively avoid the problem of dampness and effectively avoid mold and alkali on the wall.

Keep the image of the construction site beautiful and tidy

Many construction sites in the construction, will see the wall brush yellow paint, this paint is the wall solid, many construction sites have corresponding construction standards, the color of the yellow wall solid can keep the site neat and clean.

In which cases must the wall be painted?

Look at the degree of humidity

If the climate bar in the area is relatively humid and the air humidity is large, the wall must be painted, otherwise the wall is easy to crack in the later stage; If the climate in the area is moderate and the humidity is low, you can leave the wall solid without painting according to the situation.

Look at the degree of sand

Because the wall inherently prevents sanding, you can touch the friction wall and floor with your hands before painting, if there are many areas of sand in each room, there is already the phenomenon of sand falling, the wall must be painted in the entire space; If it is a small area of sanding, you need to paint the wall solid at the sanding place.

If you still have questions about decoration, environmental protection, home decoration pollution, home design and layout, etc., you can consult Litian, and all decoration problems can be answered for you!

Curing glue for walls.

The wall curing adhesive has excellent permeability, which can fully infiltrate the surface of the wall base material, make the base layer dense through gluing, improve the interface adhesion, improve the bonding strength of the mortar or putty and the wall surface, and prevent hollowing.

Scope of application: 1. It is suitable for the dense treatment of the base layer before the plastering or batch scraping putty of the brick-concrete wall, and the wall solid can improve the adhesion of the smooth base layer, which is the replacement product of the traditional building interface agent;

2. It is suitable for the bonding of wallcloth and wallpaper, due to the convenient coating, thin adhesive film, and suitable initial adhesion, it is especially suitable for the bonding of wallcloth and wallpaper, and it is not easy to produce dead folds and bulges;

3. It can be used for "wool making" on the base surface.

Outstanding performance: no free formaldehyde, benzene, toluene and xylene; Non-toxic and tasteless; Strong permeability; High bond strength.

Answer: Wall solid is a kind of interface agent; Yellow is to identify if there is a missing brush

The function of wall solidification is to solidify the base surface, make the base surface firmer, and more conducive to bonding with the next layer.

Whether the wall is solid or not, depending on the permeability ability, it is a flower after painting, indicating that the penetration is good, because the strength of the base surface is different, and the penetration depth is different.

If the color is the same, it means that the interface has less active ingredients and more color paste, only the surface layer is closed, and it does not penetrate into it, and it does not play a good curing role, so you need to be careful;

Summary. Hello, you can remove the wall solid yellow when you move into the rough room.

Hello, you can remove the wall solid yellow when you move into the rough room.

1. Use soap and a little ammonia and turpentine mixture to clean the tiles, which can clean the wall on the brick surface well, and at the same time, it can also be dismantled quickly to make the tiles more stupid. 2. Banana water can also be used to make the royal stuffiness, pure banana water is a colorless, transparent and volatile liquid, with a strong banana smell, and slightly soluble in water, soluble in various organic solvents, flammable, mainly used as a solvent and thinner for painting, can be a good cleaning of the wall on the brick surface.