How to deal with willow bark flowers? Can water the water boiled in willow bark water the flowers?

Willow bark is used as fertilizer for raising flowers, it needs to be fermented and decomposed, the bark should be selected from a more moist pine bark, which needs to contain water, fermented and rotted in a closed warm environment after being crushed, and can be mixed in the soil after a small amount of dilution with water.

First, break the bark into small pieces that are 1 cm long and 1 cm wide, and then soak the small pieces in water for 5-6 hours. After that, they are removed, mixed with the soil, stirred well, and left for a week or so to allow them to fully ferment. Once fermentation is complete, it can be used as a planting soil in a mixture with the soil.

There are often two situations of willow bark that we collect, one is the willow bark that has been dead for many years and falls off with a little prying, which is easy to fall off willow bark has basically been fermented and rotted, and only needs to be processed into the required fine granules, and then sterilized and disinfected to be used. The other is the willow bark with fibers that are artificially peeled off from the tree, and most of the willow bark with fibers has not yet fermented and rotted, so it must be fermented and rotted before use, and then disinfected and insecticidal before it can be used.

The water boiled from the willow bark can be used to water the flowers.

Because the solution of willow bark bubble contains salicylic acid, which is conducive to the growth of flowers, the chemical substance contained in the bark and leaves of willow trees - salicin, has the effect of promoting rooting, germination and promoting the photosynthesis of leaves, so watering flowers with willow bark, peanut roots are fast, rooting more, germination more, chlorophyll is rich, and the orchid plant grows vigorously.

The water boiled from the willow bark can be used to water the flowers.

Willow belongs to a wide range of ecological plants, has a wide range of adaptability to the environment, likes light, likes moisture, is cold-tolerant, and is a mesophytic and humid tree species. However, some species are also more drought tolerant and salinity-tolerant, and can grow in places with harsh ecological conditions, and grow better in fertile plains with superior site conditions. The general lifespan is 20 to 30 years, and a few species can reach more than 100 years.

The growth period is long in the year, the germination is early, the leaves fall late, and the individual species in the south are evergreen trees.

It doesn't matter, at most, it contains a little alkaloid, and it doesn't pose any harm to plants. Maybe the nutrition is a little bit simpler.

How to grow orchids? How do you get the ingredients?

When willow bark is boiled, will its rooting be affected?

The use of willow bark to raise flowers requires farmers to use the moist willow bark after high temperature decay and fermentation, or the whole willow bark can be placed at the bottom of the potting soil as a bottom material to improve soil quality. Dry bark can be soaked in water for irrigation, but willow bark should not be used too much, so as not to cause abnormal growth of flowers and plants.

Willow bark is used as fertilizer for growing flowers, which needs to be fermented and decomposed. The bark should be a moist pine bark that contains water. After crushing, it is fermented and rotted in a closed warm environment, and a small amount of water can be diluted and mixed in the soil.

In addition to being the most fertiliser, willow bark is also a great base material for pots. Willow bark can improve the air permeability of the soil and also ensure that the soil is loose and not sticky. The bottom is cushioned with clean willow bark, which also has the effect of sterilization and antiseptic on the soil.

Dried willow bark without water is not suitable for rotting and cooking, and can be soaked in clean water to provide water with nutrients suitable for rooting and germination, such as salicylic acid, acetosalicylic acid, and acetosalicylic acid. Water the flowers and plants while making the water nutritious.

Although willow bark has a good effect on raising flowers, it is necessary to control the amount and frequency, and it is not possible to use willow bark to increase nutrients every time. Willow bark can only be the icing on the cake, and if the plant is infected with pests and diseases, it may be irrigated with rotting willow bark, which may make pests and diseases more rampant.

1. Irrigate the plant soil with water soaked in willow bark. Willow bark contains a large amount of salicylic acid, acetylsalicylic acid, acetylsalicylic acid, etc., which are very suitable for plant rooting and germination. In addition, the water soaked in the dried willow bark is rich in nutrients and can also inhibit the growth of bacteria.

2. If you want to use willow bark as a decomposed fertilizer, prepare a sealed thick plastic bag, put the selected willow bark in it, add a small amount of warm boiled water, and exhaust and tie the air in the bag. Let stand for 3 months in a hot environment and in an environment with plenty of sunlight. Willow bark ferments and decays in a bag, which is more suitable for acid-loving flower and plant species.

3. If you are too troublesome, you can also break the willow bark into small pieces, and then stuff it into the soil in the process of preparing the breeding soil, as a dry base fertilizer for flower breeding. During the growth process, the buried willow bark can also be fermented, but it is not as nutritious as it is fermented and irrigated, and the use effect will be a little worse.

If you want to use willow bark to raise flowers, you need to disinfect the willow bark, kill insects, and let it ferment and rot before it can be used.

1. Handling method

Willow bark needs to be disinfected, insecticidal, and fermented and rotted before it can be used to raise flowers, if you want to disinfect and kill insects in willow bark, you can boil it, and then store the willow bark in a constant temperature of 40 degrees for a month, when storing, you can also spray a little uric acid to promote the progress of willow bark fermentation.

2. Pad flower pots

After fermentation and rotting, willow bark can be used as a base material when raising flowers, because the fermented and rotted willow bark can improve the porosity, air permeability and drainage function of the soil, and is good for the growing and developing roots of the plant.

3. Soak in water for watering

When raising flowers, it is necessary to provide water for it, you can use willow bark to soak in water, and then water it in the soil of the plant to promote the plant to take root and sprout, and the water soaked in willow bark comes with nutrients, which can also supplement its nutrition.

4. Sufficient light

When cultivating flowers, you need to provide them with sufficient light, you can put the seeds in a sunny environment, let them receive no less than 6 hours of light, to promote the rapid growth and development of the plant, you also need to do a good job of insect control measures, spray the insect repellent on the plant, to avoid pests eating the leaves.

1.The dead willow bark can be used to raise flowers, can be used to soak in water to water flowers, and can also be fermented and rotted as fertilizer.

2.In addition to dried willow bark, fresh willow bark is also fine.

3.Watering the flowers after soaking the fresh willow bark in water can promote faster rooting and avoid the phenomenon of yellow leaves.

4.Because it contains salicylic acid, it can be preservative and sterilized, which is beneficial to the growth of plants.

The correct way to raise flowers from willow bark is as follows:

1. The quality of willow trees is not very hard, and tall willow trees often fall and die in the wild. When collecting willow bark, it is recommended that you only take dead willow trees and peel them. Never peel the bark of a fresh willow tree.

Because trees need bark to grow to transport nutrients and water. Peeling can easily lead to the death of willow trees.

2. The bark of tall dead willow trees is thicker, which is more suitable for planting orchids or dendrobium flowers with strong root respiration. The crumbs from the production process can be poured directly into the soil to allow time to ferment it, and flowers can also be raised later.

3. The dead willow bark is prone to diseases such as insect eggs and bacteria. Remember to disinfect the insecticidal eggs before using them. It is recommended that you use the method of boiling, it is recommended to use an iron pot to boil the water, then pour in the willow bark, boil for about 10 minutes, and finally expose to the sun for about 3 days.

4. Willow bark mainly contains cellulose and lignin, which can only absorb water and prolong decay. When fermenting willow bark, the willow bark is put into a foam box, and then it is wet with rice washing water spray, and then poured out, and it is wet in the sun and in the box. Repeat the operation 3 to 5 times, and the willow bark is ready to use.

In this way, the willow bark can absorb the nutrients of the rice washing water and become slightly acidic.

5. Willow bark can be divided into two types: one is used as a granular planting material for orchids, replacing pine bark. One is to use it as humus after crushing.

The general operation is to directly crush the willow bark, crush it into particles of unequal size, and then filter it through a sieve, which can be used to plant flowers if it is smaller than centimeters, and can be used to plant orchids if it is larger than that.

6. When raising orchids with willow bark, you need to cut the willow bark into pieces, about the size of soybeans and peanut kernels. Then add one-third of the red jade clay and one-third of the pine needle soil. This mixture is the best planting material for the maintenance of dendrobium and orchids.

7. When planting general flowers, willow bark can be used as rotten leaves, and the crushed willow bark residue is mixed with one-third of the pastoral soil and freshwater river sand to plant other flowers.

Winter transition spring is actually not very obvious, mainly by observing some of the germination details of the plant to confirm that spring has arrived, this is not yesterday when the weather was warm and the flowers went out, I saw the spring flowers blooming, and the willows began to sprout, seeing them, everyone can be sure that spring is really coming, the subject also mentioned the willow tree today, but it is not the problem of germination, but the willow bark to raise flowers.

If you also want to know the problem, how to deal with willow bark flowers.

First of all, you should know that the use of willow for raising flowers, one is to promote the growth of the root system after soaking in water, like before cuttings at home, you can use it to soak it, rooting is faster, and the other is used as a cultivation planting material, used to breed orchids, the effect will be very good. Then let's first take a look at how to deal with soaking water as a rooting agent.

1. Willow bark soaking in water promotes the growth of plant roots.

After the spring comes, many flower friends have begun to deal with the plants at home, the pruning of the pruning, the pruned branches can also be taken to cuttings, but some flower friends cuttings are not very satisfactory, because the root system has not taken root, at this time you can use the willow bark to soak in water, generally willow bark in the water for one to two days, you can use it, and it is more convenient to use at home.

2. If willow bark is processed into planting material to cultivate orchids.

Huahua often sees the reaction of flower friends, saying that the orchid at home is always not good, in fact, it is not your problem, it is because of the problem of the soil, the orchid is prone to problems when using the soil at home, you want to raise it well, you need to use the nutrient soil that specializes in breeding orchids, and there needs to be a good bark in it, so that the orchids can be good, if there is willow bark at home, you can process it, it is best to crush it, and then stir it with some soil to raise flowers.

Through our introduction, I believe you have a deeper understanding of how to deal with willow bark and flowers, and the correct way to raise flowers.

When using dried willow bark to raise flowers, you can mix dried willow bark and cultivation medium together to make the soil more loose and breathable, or put the dried willow bark in a well-sealed plastic bag to ferment before use, and you can soak the dried willow bark in water, and then spray willow bark water on flowers and plants to make them grow vigorously.

1. Prepare soil

When using dried willow bark to raise flowers, you can use dry willow bark as the substrate at the bottom, you need to choose a flower pot with good drainage, and then spread a layer of crushed dried willow bark at the bottom of the flower pot, and then you can load loose and fertile soil into the flower pot, which can enhance the ability of soil to breathe, which is conducive to the growth of flower roots.

2. Fermentation and rotting

When cultivating flowers and plants, you can use dried willow bark as fertilizer, you need to place the dried willow bark in a well-sealed and thick plastic bag, then add a small amount of water to the plastic bag, and then place it in an environment with a temperature of about 25 degrees and sufficient light, wait for 3-4 months, and the dried willow bark can be used.

3. Soak in water for watering

When cultivating flowers and plants, you can soak the dried willow bark in warm water for 12-15 hours, and then you can water the water soaked in the dried willow bark in the soil, because the dried willow bark contains a lot of organic matter and acetylsalicylic acid, which can provide the nutrients needed for the growth of flowers and plants, so that they can take root and sprout quickly.

4. Precautions

When using dried willow bark to cultivate flowers, it is necessary to ensure that the dried willow bark does not contain pests and eggs, so as not to breed bacteria during fermentation, and when applying dried willow bark fertilizer to flower plants, it is necessary to bury the fertilizer at the edge of the flower pot wall, not near the root system of flower plants, to avoid the plant being burned roots.