Detailed methods for novices to learn to drive, detailed steps for novices to learn to drive

The basic steps of learning to drive: Before getting on the car for practical operation, you must first pass the subject 1 exam. After signing up for learning to drive and signing the contract, you can start the study of subject 1, and you can start the study of subject 2 after passing the grades.

Before learning subject 2, you must be proficient in spinning the steering wheel, and after you are proficient, you can get into the car; Once in the car, adjust the position of the backrest, seat, and mirrors on both sides. After adjusting the position, you need to fasten the seat belt, and step on the clutch and brake with both feet respectively after fastening the seat belt; Then, hold the gear lever gear with your right hand and expertly engage first gear. After putting in gear, turn left turn signal and honk your horn, then look in the left rearview mirror to see if there are pedestrians or vehicles passing behind or in front of you.

Next, lower the handbrake and lift the clutch at a constant and slow pace. If the clutch is lifted too quickly, the car will shake rapidly, which may cause stalling. When the car starts to vibrate slightly after lifting the clutch, you can lift the foot that is on the brake and start slowly, release the clutch and press the accelerator lightly.

There is a mantra for novices to learn to drive: that is, one step, two hanging, three open, four presses, five releases, six looks, and seven loose pluses. This makes it easy to remember the steps you need to follow when you get on the bus, without messing up the order and missing the course.

Steps for novices to learn to drive: 1. The correct starting steps for novices to learn to drive: insert the key, screw the key door, supply a section of power, and then screw it for a few seconds (self-test of the electronic control system), wait for the instrument light to go out, screw in the third section to start the engine; 2. Then step on the brake, put down the handbrake, hook up from P gear to D gear, release the brake, and the car is gone.

Then speed up the throttle; 3. The correct parking steps for novices to learn to drive: step on the brakes, and after the car stops, hang into P gear or N gear, screw the key door to the left, turn off the engine, pull up the handbrake, and release the brake. Raise the window, pull out the key, get out of the car, close the door and lock the car.

Detailed step-by-step steps for novices to learn to drive:

Car parking: Prepare to stop and turn on the right light, first step on the foot brake to reduce the speed, slowly lean to the right to look at the right mirror, grasp the target and the right edge, wait until the low speed of the clutch, even brake to prevent breaking, pull the handbrake after the car stops, neutral, turn off the lights, put the clutch, the foot brake is finally slowly released, to prevent sliding and make up for the measures, if there is no slippage, you can turn off.

Addendum: The Ministry of Public Security of the People's Republic of China issued the revised Regulations on the Application and Use of Motor Vehicle Driving Licenses on its official **, which came into force on January 1, 2013. According to the regulations, the content of the driver's license test subjects and passing standards will be unified across the country.

The content of the motor vehicle driver test is divided into road traffic safety laws, regulations and related knowledge test subjects (referred to as "subject 1"), field driving skills test subjects (referred to as "subject 2"), road driving skills and safe and civilized driving knowledge test subjects (referred to as "subject 3"). The content and qualification standards of the test are unified across the country, and the corresponding test items are stipulated according to different types of quasi-driving.

The content of the motor vehicle driver test is divided into road traffic safety laws, regulations and related knowledge test subjects (also known as "theory test", hereinafter referred to as "subject 1"), site driving skills test subjects (commonly known as "pile test", hereinafter referred to as "subject 2"), road driving skills and safe and civilized driving knowledge test subjects (commonly known as "road test", hereinafter referred to as "subject 3"). The content and qualification standards of the test are unified across the country, and the corresponding test items are stipulated according to different types of quasi-driving.

On January 1, 2013, the Regulations on the Application and Use of Motor Vehicle Driving Licenses (Order No. 123 of the Ministry of Public Security) promulgated by the Ministry of Public Security was officially implemented. The traffic police department gave a detailed introduction to the changes in the rules of the driver training test. These include the driving test will cancel the car crossing the unilateral bridge and other items, increase the safe and civilized driving knowledge test, record 12 points within 5 years of the bus test, drug abuse within 3 years can not apply for a driver's license, road test appointments shall not exceed 5 times and other new rules.

Entering the car - adjusting the seat, mirror - wearing a seat belt - stepping on the clutch - gear - turning signal - looking at the rearview mirror, honking the horn - easy clutch, let go of the handbrake - light gas pedal - departure.

Bon voyage!!!