Introductory tutorial for beginners of the water drop wheel, how to use the water drop wheel

The beginner's tutorial for the water drop wheel is:

1. The braking force of the water drop wheel has a total of ten levels, first of all, the magnetic adjustment knob is pointed to the scale 10, so that the wheel has the maximum braking force and makes the throwing more stable!

2. Lift the pole to 45 degrees, adjust the "spindle adjustment screw", let the fake bait fall quickly and smoothly, after the fake bait falls into the water, the spool still continues to rotate, so that you can get the best throwing distance.

3. The star-shaped plate can be adjusted to the tightest, or there is a state of take-up and unloading, so that the wheels are always ready to fight!

Precautions for using the water drop wheel:

1. When novices are practicing, please use cheap nylon threads to avoid unnecessary waste.

2. It is best to throw the rod in an open place, so that you can throw it as you like, without worrying about hitting people.

The beginner's tutorial for the water drop wheel is as follows:

1. First of all, there are ten levels of braking force of the water drop wheel, first of all, the magnetic adjustment button, pointing to the scale 10, so that the wheel has the maximum braking force, so that the throwing is more stable and the effect is better.

2. Lift the pole to 45 degrees, adjust the "spindle adjustment screw", the upper line is lower than the edge of the wire wheel by millimeters, and more or less winding will affect the effect of throwing. Let the lure fall quickly and smoothly, and after the lure falls into the water, it is best to continue to rotate the spool, so that you can get the best throw distance.

3. Star-shaped plate, adjust the star-shaped plate to the tightest, or have the state of winding and unloading, and then insert the wheel feet of the fishing wheel into the card holder, and then tighten the knob until the fishing wheel will not be loosened.

The water drop wheel is generally marked with a wire capacity, and the line cup should not be too full when it is online, because it is easy to jump the line when it is too full. When casting the rod, pay attention to the people and objects around you, and be sure to make sure that the hook will not hang on to other obstacles when casting the bait. Don't be too impatient and nervous when frying the line, you can loosen and remove the right cover, remove the wire wheel, straighten it out and then put it back on.

There are four main advantages of the water drop wheel, one is that the volume of the water drop wheel is very small, the second is that the weight of the water drop wheel is very light, the third is that the water drop wheel is very smooth, and the fourth is that the throwing accuracy of the water drop wheel is higher than that of the spinning wheel.

The water drop wheel is divided into "centrifugal brake" and "magnetic brake".There are different ways to use it.

How to use "centrifugal brake" and "magnetic brake":

1. Centrifugal force brake is more suitable for light bait throwing, and it is more difficult to copy powder.

2. Magnetic brakes are more suitable for throwing heavier bait, and throw farther.

Instructions for use: 1. When novices practice, please use cheap nylon threads to avoid unnecessary waste.

2. It is recommended to use the number of the strong horse line (PE line).

3. Throw at close range on time.

5. Please use heavier and larger fake bait to practice throwing, and it is not suitable to replace it with heavy lead. (Heavy lead is not good, using the counter-fishing method of hooking, swinging the fake bait out to reach the desired point.)

4. In order to pursue a longer distance, please adjust according to the weight of the bait"Magnetic adjustment knob"Go for less braking force, find the right balance between frying flour and long distance, and push your droplet wheel to the limit. Visually inspect the moment before it fell into the water)

6. In order to throw a longer distance, it is recommended to use a super hard rod!

7. It is not recommended to throw less than 4 grams of fake bait with a drop wheel, although I can throw 2 grams of lead hook + small soft worms to 7-8 meters, but throwing light bait is always the advantage of spinning wheels.

Fishing experience, how to use a drop wheel and skills.

What is Water Drop Wheel? How does the water drop wheel work? Master Lure will introduce you in detail!

Tutorial: 1. The braking force of the water drop wheel has a total of ten levels, first of all, the magnetic adjustment knob is pointed to the scale 10, so that the wheel has the maximum braking force and makes the throwing more stable.

2. Lift the pole to 45 degrees, adjust the "Minda spindle adjustment screw", so that the fake bait falls quickly and smoothly, and after the fake bait falls into the water, the spool still continues to rotate, so that you can get the best throwing distance.

3. The star-shaped plate can be adjusted to the tightest, or there is a state of take-up and unloading, so that the wheels are always ready to fight!

Technical focus: Before you start throwing bait, you need to adjust the brake magnetism as much as possible, and you don't need to throw how far you want to throw it, and you need to pay attention to a stable situation. After throwing the bait, you need to keep your eyes on the movement of the lure, and press and hold the reel with your thumb at an appropriate distance before the lure moves into the water, so that the reel does not rotate.

Many people will fill the fishing line or base argument when using the water drop shirt and lack of wheel, at this time it is very easy to blow up the line, and it is best to load a little more than half of the front wheel when loading the line, about seventy or eighty meters is enough to use.

The method of launching the water drop wheel is as follows:Tools Raw material: water drop wheel.

Method 1 <>

2. Then we install the wire cup on the water drop wheel, directly reel in the line, open the side cover of the water drop wheel, take out the spool inside, and thread the fishing line out of the threading port.

3. Next, tie the fishing line that comes out with a live buckle with the main line and a little connected with the rod, ** need to be wound with a small coil for 4 or 5 turns, and it will become a slipknot after being tightened.

4. Finally, we put the slipknot on the spool and tie it tightly, in order to keep the knot on the shaft, you can wrap the fishing line around it, and then tie it on the axis, repeat it 3 or 4 times.

1.First of all, prepare the tools, a 10mm socket (if you can't use a wrench, it is best to use a socket-type wrench, a movable wrench to slip the nut), a bearing ejector rod, a small screwdriver, a brush, and grease and oil.

2.First remove the rocker arm screw, remove the nut fixing piece, unscrew the nut, remove the rocker arm, the magnetic part of the magnetic brake (dynamic damping) on the side cover only needs simple cleaning and maintenance, loosen the handle fixing nut with a wrench, loosen clockwise and counterclockwise, and the removed gasket is stacked in accordance with the installation direction and sequence, and the transmission structure of the water drop wheel needs to be cleaned with sludge and greased for maintenance.

3.Suggestion: The water drop wheel needs to be maintained every three months after half a year of purchase, the worm shaft is injected with grease, and the dirt is very serious.

Maintenance should start from dismantling, dismantling must be arranged in order, it is best to dismantle each piece carefully to see clearly, it is best to carry out in a very clean environment without clutter.

2. Install the wire cup on the water drop wheel, directly reel in the line, open the side cover of the water drop wheel, take out the spool inside, and thread the fishing line out of the threading port.

3. Tie the fishing line that comes out with a live buckle with the main line and a little connected with the rod, ** need to be wound with a small coil for 4 or 5 turns, and it becomes a slipknot after being tightened.

There are four important points for beginners.

The details are as follows: 1. The main brake of the line cup: the plum blossom knob at the rocking handle is commonly known as the force relief brake, which is mainly used to adjust the braking force of the line cup, provide appropriate resistance for walking the fish after catching the fish, and prevent the line from running the fish; It is generally not recommended to lock the adjustment, and the main line can be pulled out with a certain amount of strength according to the size of the target fish.

2. Throwing brakes: throwing magnetic brake knobs, generally on the side of the wheel, are divided into centrifugal brakes and magnetic brakes, Dawa generally uses magnetic brakes, Cimano generally uses centrifugal brakes, the role is to provide appropriate control force for the bait after throwing during the flight, its principle is similar to the negative feedback system, when the wheel speed is faster, the greater the resistance provided to the wire cup, to ensure that the speed of the line cup does not exceed the flight speed of the bait when just throwing out of the line, to prevent the line from being blown up, due to the small speed in the later stage of the bait flight, There is almost no resistance to the line cup Tihuai Zhen Bucket to ensure that the lure flies farther. Generally, this adjustment button can be placed in the middle position, mainly according to the wind direction adjustment, downwind and wind, adjust the resistance when the wind is downwind, and adjust the resistance when the wind is headwind, so as to ensure that the fishing line is in a tight state, and the lead grinding can reach the ideal distance without frying powder.

There are also two types of brakes, which have the same principle.

3, fine-tuning: on the side of the crocking handle, called "fine-tuning" personal habits are not unavoidable, the correct name may be "spool tension adjustment button" is more appropriate, this button is actually to adjust a thimble in contact with the wire cup shaft, this thimble has two functions, combined with the role of the spring on the wire cup to ensure that the wire cup does not shake left and right, the greater role is to provide the appropriate friction resistance of the wire cup shaft, the size of the friction resistance is proportional to the contact area and pressure of the thimble and the wire cup shaft, It should be noted that this thimble has two structures: a metal rod directly connected to the wire cup and a non-metallic material, the latter is not integrated with the wire cup, which is mainly reflected in high-end wheels. Due to the certain deformation ability, the contact surface increases when compressed, so the static friction can be changed by adjusting this knob.

The function of this knob is to give the appropriate spool static friction resistance according to the weight of the bait, generally the heavier the bait, the tighter the adjustment knob, so as to ensure that the speed of the line and the flight speed of the bait match. The method of adjustment is: when changing the bait, you need to test whether the "spool tension adjustment button" is in the right position, to ** section until the bait falls is not free falling, there is a certain traction, there are previous posts that the bait falls to the ground line cup rotation does not exceed two circles, I don't think you need to be harsh, you can use it smoothly as you like, the reason is that the smoothness of each wheel is not the same, it is recommended that friends who are new to playing with water drops still have to feel that the bait falls when the fine-tuning provides a certain resistance to the fishing line.

4, throwing technique: this is very critical, in the past everyone may have played with the big throwing rod spinning wheel, this operation as long as the body strength does not lose the remaining accuracy, there is no big requirement, but the small travel car small drop wheel requires more, throwing techniques to master the force do not use the big arm, to use the small arm and wrist to short mana, like the wrist force used when playing badminton, newcomers do not come up to pursue throwing far, first slowly practice the action, this is very important, come up to the vigorous action must be deformed, fried powder is inevitable.