-
Before cleaning the toilet, ventilate the room. Open all the windows in the room and remove everything that is placed on the toilet tank.
How to clean the toilet.
Wear household rubber gloves.
Flush the toilet bowl with clean water before opening the toilet lid.
Pour toilet cleaner into the inner wall of the toilet in a wrap-around motion, close the toilet lid and soak for a few minutes. During this period, the outside of the toilet bowl was cleaned.
How to clean the toilet.
Wipe the outside of the toilet with disinfectant, and do not leave out the water tank, flush button, toilet rim, and toilet washer.
How to clean the toilet.
Use a paper towel to wipe down the area on the toilet bowl that has been wiped with disinfectant.
How to clean the toilet.
Now open the toilet lid and use a toilet brush to scrub the inner wall of the toilet, especially the various outlets inside the toilet, and focus on cleaning.
How to clean the toilet.
Press the water dispense button to flush the toilet again with clean water, and use the water used to flush the toilet brush. The toilet bowl is cleaned.
How to clean the toilet.
end precautions.
If the toilet lid is opened when flushing, an instantaneous cyclone in the toilet can carry germs or microorganisms up to 6 meters into the air and remain suspended in the air for several hours before landing on walls and toothbrushes, mouthwashes and towels.
-
Buy a special toilet bowl cleaner, such as a toilet cleaner or something. Spray it on the surface of the toilet, and after ten minutes, wait for it to dissolve the dirt, and then use a brush to brush it.
-
There is a kind of white cat brand bleaching in the supermarket, buy the kind of special toilet cleaning, do it according to the instructions, and the effect is very good.
Is that okay?
-
Buy toilet cleaner in the supermarket, super easy to use, corrosive, don't touch the body.
-
To clean up the scale inside the toilet, you need to prepare: a bottle of Coke, a toilet brush.
2. After pouring the coke, you need to let it stand for three minutes to allow the cola to decompose the scale in the toilet.
3. Then use a toilet brush to scrub the scale inside the toilet.
4. Next, rinse the toilet bowl with clean water.
5. Finally, you can clean the scale in the toilet.
-
1. To clean the toilet, you can mix a cup of white vinegar with a little baking soda powder and pour it into the toilet, brush off the stains with a brush after 10 to 15 minutes, and then rinse it several times with water to achieve the purpose of cleaning. If the toilet bowl has turned yellow after a long period of use, you can pour it into a cola to soak, most of the dirt can be removed, if there are stubborn stains, you need to use a brush to clean further.
2. The most direct contact with people is the toilet cushion, and the cushion should be disinfected with disinfectant or baking soda when cleaning the toilet. Many people like to use hot water to clean the toilet, thinking that it will achieve a better cleaning effect, remind these friends that do not use hot water with a temperature of more than 60 degrees, otherwise it may cause the toilet to crack.
-
Hello answer, I have seen your question here, and I am typing it for you quickly, but typing and typing will take a certain amount of time, I hope you can understand, here, will definitely reply to your question. At the same time, it will also give you a satisfactory answer, please be patient!
Washbasins or toilets often have rusty stains that naturally adhere to them and are difficult to remove. Try it with sandpaper that is fine and water-resistant, and you will have unexpected results.
I hope my answer is helpful to you, if there is still something you don't understand, you can ask questions, we can also discuss together, if you have no questions and are satisfied with my answer, click on the upper right corner to end the consultation, give me a 5-star like, thank you!
-
There is a sanitaryware descaler bought in the store.
-
Limescale in the toilet bowl is a common problem, especially in areas with hard water. Limescale not only affects the aesthetics, but also the longevity and hygiene of the toilet. Here are some effective ways to solve the scale problem:
1.Clean with a dehydrator: There are many types of dehydrators available on the market that can be used to remove limescale from the toilet. Using a dehydrator as directed can remove limescale and kill bacteria, keeping the toilet bowl clean and hygienic.
2.Homemade cleaners: Homemade cleaners can be an economical and eco-friendly option. It is to mix white vinegar and baking soda in a clean spray bottle and spray it on top of limescale. Wipe with a soft-bristled brush or rag, then rinse with limb water or wipe clean with a damp rag.
3.Use bleach: Pour bleach into the toilet bowl and scrub it with a brush. Bleach not only removes limescale but also eliminates bacteria from the toilet bowl and keeps the toilet bowl clean and hygienic.
4.Use a foam cleaner: There are some foam cleaners on the market that can easily remove limescale.
Simply spray the foam on the limescale and wait a few minutes as instructed before scrubbing with a brush. Foam cleaners can create a protective layer inside the toilet bowl to prevent future limescale from forming.
5.Full Toilet Replacement: If the above methods don't meet your needs, then you may want to consider replacing the entire toilet.
Maintaining the cleanliness of the toilet bowl has always been a key part of maintaining household hygiene. If you have limescale on your toilet, the above solutions can help you quickly resolve the problem. In short, it is necessary to clean the toilet regularly and maintain good hygiene habits to prevent the problem of limescale in the toilet.
-
Hello dear, glad to answer for you, <>
How to clean the toilet bowl stubborn and dirty scale Answer: Remove the old dirt of the toilet bowl Step Zheng return to the method of vinegar descaling: pour the mixture of vinegar and water into the toilet, and after soaking for half a day, the dirt will be brushed off. Use baking soda, dish soap, and white vinegar to mix it in proportion and pour it into the toilet, and after an hour, brush it with the toilet, and the stubborn scale will be all brushed off.
The toilet bowl can be cleaned with a salt-vinegar mixture, first mix the salt and vinegar together and stir, then use an absorbent sponge or rag to dip the liquid in the rust spot and cover it for more than 20 minutes, and finally use a coarse cloth dipped in the salt-vinegar mixture to scrub vigorously to remove it. Relatively speaking, the toilets on the market are divided into four types according to the sewage discharge method: flush down type, siphon flush down type, siphon jet type and siphon whirlpool type.
-
Here's how to remove the hard dirt at the bend of the toilet:Ingredients: white vinegar, cola, baking soda, hot water.
Method Steps:
1. White vinegar Coke: Pour an appropriate amount of white vinegar into the toilet bowl and soak for about ten minutes.
2. Press the flush button to flush, then pour the cola into the toilet, let it stand overnight and then flush it out.
3. Baking soda Hot water: Sprinkle an appropriate amount of baking soda on the toilet.
4. Pour hot water and soak for 20 minutes, which can effectively remove stubborn hard dirt.
-
You can soak it with oxalic acid, if you don't have it, you can use acetic acid to clean it and try it.
-
Nowadays, there are more and more families and public toilets that use toilets, although the toilet is very convenient to use, but it is also very easy to get dirty, and the dirty toilet is not cleaned in time, it is very easy to produce hard dirt, and then if you want to remove the dirt, it will be more troublesome, and it is indeed difficult for a large number of people.
So how to remove the hard and old dirt of the toilet? Now I will give you a detailed introduction to the various techniques for removing the old dirt of the toilet.
Technique 1: Vinegar descaling method.
We can mix vinegar and water, and then pour the vinegar mixed water into the toilet, don't rush to flush the toilet, soak it for half an hour and then use a brush to brush the dirt of the toilet, you can easily brush the toilet dirt and then flush the toilet, at this time the toilet will look new, like new.
Tip 2: Baking soda descaling.
In addition to soaking with vinegar, in fact, baking soda also has a good effect on descaling, we can mix baking soda with hot water, and then pour it into the toilet bowl with dirt, let the hot water mixed with baking soda soak the toilet bowl dirt, soak for about 20 minutes, you can directly brush off the dirt and then clean.
Technique 3: Scrub paper descaling method.
Although soaking vinegar and baking soda is very useful, it takes a certain amount of time to soak, so in order to remove the dirt of the toilet bowl more quickly, then we can also pour toilet cleaner directly into the toilet, and then wipe the dirt of the toilet bowl with fine sandpaper.
-
Technique 1: Vinegar descaling method.
We can mix vinegar and water, and then pour the vinegar mixed water into the toilet, don't rush to flush the toilet, soak it for half an hour and then use a brush to brush the dirt of the toilet, you can easily brush the toilet dirt and then flush the toilet, at this time the toilet will look new, like new.
Tip 2: Baking soda descaling.
In addition to soaking with vinegar, in fact, baking soda also has a good effect on descaling, we can mix baking soda with hot water, and then pour it into the toilet bowl with dirt, let the hot water mixed with baking soda soak the toilet bowl dirt, soak for about 20 minutes, you can directly brush off the dirt and then clean.
Technique 3: Scrub paper descaling method.
Although soaking vinegar and baking soda is very useful, it takes a certain amount of time to soak, so in order to remove the dirt of the toilet bowl more quickly, then we can also pour toilet cleaner directly into the toilet, and then wipe the dirt of the toilet bowl with fine sandpaper.
Reason 1: The flange interface is installed when it is biased, and the sewer flow rate is reduced. >>>More
Pay attention to hygiene, clean often, and use toilet cleaners.
Summary. Kiss I'm glad to answer for you, my answer is as follows: Kiss, the toilet dropped an eraser Here's how: >>>More
Usually the inside of the toilet bowl has a gasket seal, in this case, glass glue is applied around the toilet. If the inner sealing ring is broken, and you want to replace the inner sealing ring, use a utility knife, adhesive tape, wrench, glass glue and glass glue gun, and then replace it after removing it and reinstall it.
From which part of the leakage, if it is leaking from the water tank, you can take off the drain machine core, clean up the scale, if not, can be replaced: if the bottom of the toilet is leaking, hit glass glue, can not be used within 24 hours, or remove and reinstall. If the float is leaking, see if the float is damaged, if yes, replace it, if not, take off the float, put glass glue on the float gasket, and install it.