Is tile adhesive better or tile adhesive?

It can be compared from these aspects:

1. From the construction point of view, the tile adhesive is a one-component emulsion, which is brushed when the lid is opened, and then used with traditional cement mortar. It is more convenient than tile adhesive construction.

2. From the point of view of adhesion, the adhesion of Visk tile adhesive is relatively strong.

3. From the perspective of construction cost, the construction cost of tile adhesive is higher than that of tile adhesive.

4. From the comparison of knocking bricks, the tiles with tile adhesive will not cause the whole tile to fall due to external force.

1. Senke energy-saving tile adhesive (adhesive) solves the problem that some tiles cannot be pasted with ordinary tile adhesives, which is convenient and convenient, and there is no need to worry about shoveling off the tile and re-pasting it or sticking it outside with adhesive. No need to dip bricks in the construction, good flexibility, impermeability, crack resistance, aging resistance, high temperature resistance, freeze-thaw resistance, non-toxic and environmental protection, easy construction.

Second, tile adhesive, also known as ceramic tile adhesive or binder, adhesive and other names, is a new type of material for modern decoration, replacing the traditional cement yellow sand, adhesive adhesion is several times that of cement mortar, can effectively paste large ceramic tiles and stones, to avoid the risk of falling bricks.

Therefore, it is recommended that you choose the right product according to the actual situation of your home.

No one is better, depending on how it is used. The binder is applied to the back of the brick to increase the two-way adhesion between the tile and the base surface. Ceramic tile is a material that replaces cement mortar, and its adhesion is much better than that of cement mortar.

Depending on what bricks you use to paste, if it is a tile, it is best to use a solid tile adhesive to not drop the bricks; If you just want to stick porcelain tiles, then you can use tile adhesive.

First of all, thank you for having me!

Is it better to use tile adhesive or tile adhesive? First of all, we need to understand the uses and characteristics of these two materials.

As a new type of adhesive material to replace cement, ceramic tile adhesive has the characteristics of convenient construction, thin bonding layer, space-saving, and firm adhesion. Compared with cement, it has better flexibility, impermeability, waterproofing, crack resistance, aging resistance, high temperature resistance, freeze-thaw resistance, etc.

Strictly speaking, tile adhesive is a treatment agent for the back interface of ceramic tiles. In view of the current practice of many floor tiles on the wall (such as vitrified tiles), in view of the characteristics of these non-porcelain tiles such as large area, thick and heavy, smooth surface and low water absorption, the adhesive strength of the adhesive material on the back of the brick can be improved, and the problems of hollowing, shelling, and falling off can be effectively prevented.

So, the two materials are not in conflict. They can complement each other. As for how to use it, it depends on what bricks you paste, what parts, and of course, there are cost considerations.

Tile adhesive, also known as face tile binder, is made of cement, quartz sand, polymer cementing material with a variety of additives through mechanical mixing. Tile adhesive is mainly used as an adhesive for bonding tiles and face tiles, also known as polymer tile bonding mortar. [1] This tile adhesive completely solves the problem that there is no high-quality special adhesive material to choose from in the pasting construction of ceramic tiles, floor tiles and other materials, and provides a new and reliable ceramic tile special adhesive product for the Chinese market.

Product features 1. High bonding strength and fast hardening speed, which can greatly improve the service life and decorative effect of various paving materials. 2. The construction is convenient, and it can be used only by processing an appropriate amount of water and stirring. The tiles to be pasted do not need blisters, and can be pasted directly.

3. Excellent compressive and tensile strength, water resistance, alkali resistance and weather resistance, not affected by the environment. 4. Good workability, good water retention, workability and flow resistance. During the bonding process, the tile can be adjusted for 10 minutes and operated for 60 minutes.

5. The ultra-thin layer construction can be realized, and the coating thickness is less than half of the traditional process, which saves costs and reduces the shrinkage rate, and will not cause the cracking and falling off of the decorative adhesive surface due to force. 6. Non-toxic, tasteless, non-polluting, it is a real green and environmentally friendly product.

Tile adhesive: Strictly speaking, it is a liquid tile adhesive, also called "tile adhesive". It is mainly used for the reinforcement treatment of the back interface of low water absorption vitrified brick and stone paste, which can enhance the adhesion of the substrate, and should be used together with cement or tile adhesive, but not alone, generally without adding water, with single component and double component.

Tile adhesive: It is a powder, which is a tiling material that replaces cement, and it can be tiled by adding water and stirring, and can be used alone. Generally, the thin paste method is used, the tile adhesive paste layer is thin, the material consumption is less, the weight is light, the load of the building is reduced, and the material cost is saved.

Tile adhesive plays a pivotal role in the paving of ceramic tiles, which improves the efficiency of ceramic tile paving and makes the effect of ceramic tile paving more obvious and beautiful. What tile adhesive is good to use? Let's find out!

1.Marco Polo Marco Polo tile adhesive is a product of Guangdong Weimei Ceramics, the company occupies the market with cultural ceramics and enjoys the reputation of antique bricks. Although the tile adhesive produced by it is a by-product of the company, it is very high-quality in quality, not only using pollution-free raw materials for production and processing, ensuring the health and environmental protection of the tile adhesive, but also has super adhesion, so that the tile paving effect is better, and has been trusted and supported by many marketing and consumers.

2.Dongpeng Dongpeng tile adhesive is a product of Guangdong Dongpeng Holding Co., Ltd., Dongpeng company is one of the largest professional production enterprises in China, with the most complete varieties and specifications, and the best reputation. The tile adhesive produced by it can realize the application of ultra-thin layers, and the thickness of the application is less than half of the traditional process, and its shrinkage rate is reduced, preventing the cracking and falling off of the tile.

3.Nobel tile adhesive is a product of Nobel Group, Nobel Group pays attention to technology and quality in the production of products, and its production of Nobel tile adhesive has high strength adhesion, fast cherry blossom speed, which can greatly improve the service life of paving materials and decorative effects. The above is a brand introduction about tile adhesives, I hope it will be helpful to you.

Interested friends can collect more, it will be helpful to you in the future.

OLY-3101 general tile adhesive.

Scope of application. It is suitable for indoor and outdoor concrete or cement mortar substrates, tiles, marble, granite, and mosaic pasting.

Features: The construction is simple, there is no need to soak the brick wet wall, and the work efficiency is high.

The adhesive layer is thin, the adhesion is strong, the material is saved, and it is uniform, and the hollowing is avoided.

Green, safe and non-toxic.

Base surface requirements. The surface of the substrate is strong, dry, clean, free of oil, concrete curing agents and other loose materials.

Construction method. Mixing ratio: water:powder = 1:4 (kg).

1 Pour water into the container, then add the tile adhesive in proportion, stir it into a uniform, non-granular paste with electric stirring, let it stand for 5 minutes and stir for 1-2 minutes.

2 Use a toothed scraper to apply the tile glue to the base surface. Make it evenly distributed, and form a strip of teeth, apply about 1 at a time, and then knead the tile on it.

3 If the groove on the back of the tile is deep, in addition to applying tile adhesive on the working surface, the adhesive should also be applied on the back of the tile.

Precautions. This product is suitable for construction in the environment of 5 -40, and the vertical and flatness of the base surface should be confirmed before construction.

It is best to use up the tile adhesive that has been stirred with water within 2 hours, and do not mix and mix the tile adhesive that has been dried and solidified, and only after 24 hours after the construction is completed, you can step into or fill the joint.

Tile adhesive, which is commonly known as tile adhesive, is made of high-quality cement, quartz sand, cellulose and other raw materials, compared with ordinary cement river sand, with the following characteristics:

1.Strong adhesion force, the adhesion force is 3 times that of traditional cement river sand tiles;

2.No hollowing, no bricks, no slipping;

3.Water-resistant, moisture-proof, anti-aging;

4.It does not contain harmful volatiles such as formaldehyde and benzene, and is environmentally friendly and non-toxic;

5.The construction is simple, and it is ready to use with water, omitting the steps of wet wall, soaking brick, and supporting of traditional cement river sand tiles;

6.Thin-layer construction, space-saving, the thickness of the traditional cement river sand tiles is about about 5mm, while the thickness of the porcelain is only about 5mm, which greatly saves the use of space.

Gulai tile adhesive has strong adhesion, is a ceramic tile accessory product, because the construction is simple and convenient, can avoid the phenomenon of hollowing of the tile, after pasting the tile will be firmer, and has the effect of waterproof and anti-aging.

"Tile adhesive (also known as tile adhesive) is a construction auxiliary material applied to the back treatment of wet vitrified tiles, which can effectively improve the bond strength between vitrified tiles and adhesive materials, and solve the common hollowing and falling off problems in wet pasting of vitrified tiles. Floor solid tile adhesive is a flexible water-based emulsion modified from polymer formula, which is not only environmentally friendly, non-toxic, no peculiar smell, but also has good air permeability, high flexibility, acid and alkali resistance, strong weather resistance, suitable for a wide range of temperature and humidity, and can be constructed in humid environments.

For different bricks and different environments, there are different products to be used:

Lougu A8 weather-resistant (two-component) tile adhesive is suitable for large bricks above 1000mm, with the best viscosity, strong cold and heat resistance, and can withstand high temperature boiling. It is more suitable for pasting large bricks on the background wall.

Lougu A6 super strong (one-component) tile adhesive is suitable for bricks with low water absorption above 600mm, tensile, high and low temperature resistance, moisture, suitable for all kinds of ceramic tiles, marble, mosaic bricks, vitrified tiles, polished tiles, calcium silicate boards, gypsum boards, concrete surface paste, long-term bonding, can solve the problems of hollowing, cracking, falling off of the plastering layer caused by the smooth surface of the adhesive object, too low water absorption, too strong, etc., is polished brick, marble, mosaic, artificial stone, Ideal bonding product for natural stone.

Lougu A5 reinforced (one-component) tile adhesive is suitable for 300mm-600mm bricks with low water absorption, elongation, high and low temperature resistance, moisture, suitable for all kinds of ceramic tiles, marble, mosaic bricks, vitrified tiles, polished tiles, calcium silicate boards, gypsum boards, concrete surface paste, long-term bonding, can solve the problems of hollowing, cracking, falling off of the plastering layer caused by the smooth surface of the adhesive object, too low water absorption, too strong, etc., is polished brick, marble, mosaic, artificial stone, Ideal bonding product for natural stone. "

Tile adhesive, also known as tile adhesive or tile adhesive, is divided into ordinary type, polymer type, heavy brick type, mainly used for pasting ceramic tiles, face tiles, floor tiles and other decorative materials, widely used in interior and exterior walls, ground, bathroom, kitchen and other building finishing decoration places.

Chenguang tile adhesive is mainly characterized by high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction, which is a very ideal bonding material.

The traditional cement and yellow sand on-site mixing mortar is used to paste the tiles with the traditional thick layer pasting method, which consumes about 1,044 billion tons of yellow sand and cement every year, while the new ceramic tile adhesive products are pasted by the thin paste method, which only needs about 232 billion tons, which greatly saves resources.

In addition, using the traditional paving method, a skilled worker can only pave 7 8 square meters a day, and using ceramic tile adhesive products for thin bed paving, a worker can construct more than 25 square meters a day, which greatly improves the work efficiency.

Tile adhesives and adhesives are not exactly the same, and while they are both adhesives used to bond materials, they differ in their nature, purpose, and working principle.

Tile adhesive is mainly used to bond tile, marble, granite and other stones, it is usually a powdery substance made of cement, lime, quartz sand and other materials, you need to add water and stir it into a paste or paste before use, and then apply it to the wall or ground, and then stick the tile and other materials on it, and wait for it to dry. Tile adhesives have high adhesive strength, can withstand large weight and pressure, and have good waterproofing and durability.

Adhesive is a broad concept that includes many types of adhesives, such as latex glue, super glue, epoxy resin, etc. Adhesives can be used in a wide range of applications to bond a variety of materials such as paper, cloth, metal, plastic, and more. Different types of adhesives have different bond strengths, durability and applications.

So, while tile adhesives and adhesives are both adhesives used to bond materials, they don't exactly serve the same purpose and work principle.

1. All tile adhesives are mainly used to solve the problem of ceramic tiles, and most of the ceramic tiles need to be used in the construction of ceramic tile adhesives, which are generally used in the field of building decoration. The adhesion of tile adhesive is very strong, and the speed of hardening is also very fast, different paving materials can use tile adhesive, this brick adhesive can not only improve the service life of tiles, but also enhance the decorative effect of autobiography.

The following is an introduction to what brands of tile adhesives are good:

1.Gulai: Guangzhou Gulai Building Materials, engaged in the building materials industry for many years, has been focusing on product development and production, has a number of subsidiaries.

2.Yuegang: Shanghai Yuegang Building Materials, is a company focusing on waterproof coatings, among them, the company's development and production of products and adhesive products.

3.Tibebel: Guangzhou Tibeibel Building Materials Co., Ltd. is a large-scale enterprise specializing in the research and development, production and sales of new environmentally friendly water leakage and environmental protection binders and dry mortar.

4.Jiacai: a well-known building materials manufacturer in Hunan, focusing on waterproof coating building materials.

5.JCDecaux: JCDecaux (Guangzhou) Building Materials, founded in 1998, after more than 20 years of development, JCDecaux China has become a leader in China's special mortar industry.

6.Xiluojia: Hunan Xiluojia building materials ****, is an emerging company specializing in waterproof building materials.

7.Yuhong: Beijing Oriental Yuhong Waterproof Technology **** is a company mainly engaged in waterproof coating products. After successive expansions, the products include waterproof coatings, tile adhesives and other products.

8.Gushuibao: a well-known building materials manufacturer in Hunan, the company is mainly engaged in waterproof coating products. After past expansion, its products include waterproof coatings, tile adhesives and other products.

9.Mapei: Founded in Milan in 1937, the Italian Mapei Group has become a world leader in the production of adhesives and some ancillary products for the decoration of flooring and wall fixtures.

10.Keshun: After more than 20 years of operation and development, Keshun waterproof technology has developed into a comprehensive building materials company with comprehensive waterproof solutions as its main business, integrating engineering building materials and civil building materials, and its business scope covers both domestic and foreign countries.

The above are several reputable waterproof material manufacturers in the market for your reference. Thank you.