When the LETV mobile phone is charging, it always can t be charged when the power stops?

If the phone is out of power now, you need to use the original charger to charge it for 30 minutes and then turn it on.

Try to change the battery, whether the protective board of the battery is faulty, and whether the charging cable of the charging head is broken.

Normally, the breathing light will not be charged until it turns green after the charging is complete. You can now plug in the charger and see if you can restart your phone. If the phone doesn't turn on again, then it is possible that the battery is faulty or out of activity due to frequent power outages before charging.

When the phone is turned off, press and hold the power button and the volume down button at the same time to enter the project mode, and select the Clear Cache option through the volume button, and the system will automatically clean the cache. After clearing the cache, select Restart to see if the computer can boot normally. If you can't enter the engineering mode, it is recommended to bring your mobile phone, warranty card, and invoice to the local customer service center, and the staff will help you check the mobile phone and then provide help.

In this case, it may be that the charger is broken, or it may be that the charging card slot is broken, of course, it is not excluded that it is the battery, motherboard and system reasons, you change a charger to see if it is the reason for the charger, if it is not the reason for the mobile phone itself, send it to the after-sales service or repair shop to test it.

You reboot it to try, a common problem with smartphones. Or replace it with a different charger and return it, sometimes occasionally. If it doesn't work, it's a broken phone. Take it and fix it.

There can be several reasons:

The charging head is broken, the data cable is not plugged in properly, the phone battery is wrong, restore the phone factory settings to see,

Possible causes and solutions for not charging:

1.Charging equipment. For example, if the data cable or charging head is abnormal, replace the test separately.

2.Battery failure. For example, loose, deformed, etc., replace the battery.

3.Mobile phone software malfunction. Generally, flashing can be solved.

4.Hardware failure of the phone. For example, the charging interface is in poor contact, etc., and it will be sent for repair.

5.Other. For example, too much software runs in the background, resulting in the input being less than the output, resulting in the phenomenon of not charging.

Above, for reference.

Try to change the battery, whether the battery's protective board is faulty, and whether the charging head is broken

If the phone does not chargePlease try:

1.Use the original charger and data cable to connect to the power supply for charging.

2.For mobile phones with detachable batteries, you can turn off the battery and use a cotton swab to clean the battery contacts and the charging port of the mobile phone.

3.It is also possible that the weather is too cold and the contact is poor.

If the above methods do not solve the problem, please bring the purchase invoice, repair card and machine to the LETV service center for inspection.

Reasons for poor plugging of the mobile phone charging port:After the charging port enters the dirt, the blocking electrode leads to poor mating, which will further increase the plugging force, and then cause a series of problems such as socket deformation and solder joint desoldering.

The common problem of LETV mobile phones, take it to the after-sales service and say that it will replace the motherboard 300 pieces. I used 1 and a half years for a LeTV 1 and asked me to repair 300? Warranty for 30 days. Can't you fix it? It can be used now, but it may not be able to be used later, and then it can be used again. It's like a ghost, and I'm upset every day.

I don't know what's going on today, it's only been more than four months.

Is the background turned on too much, turn off and charge.

If the warranty period has not expired, it is recommended that you better go to after-sales.

1.It is recommended to activate the battery by the way while charging it in the future, so that there is no memory when the battery is charged.

2.Charge with an AC socket, charge to 100% and turn off the battery, then charge in the shutdown mode until the light turns green.

3.Enter the recovery mode, select advancsd advanced mode, select wipe battery, and clear battery traces.

4.Turn on and charge to 100%, so that your battery has no memory and can be charged much faster in the future.

It may be that your phone's data cable is not matched.

My previous phone was a Meizu cable, and it was restarting all day.

Then I changed to the original data cable I bought, and it was fine.

Mine is a broken data cable, try a different one.

I'm from an x900 and I've been using it for a year. After changing to the new version and stable version, there was a phenomenon that the charging did not respond. The main measure is to wait for 10 seconds after shutting down, the charger is plugged in and charging and there is a response, and then it is OK to turn it on.

I saw it before that it said that it was useless to shut down and restart directly into tool mode. It's just a little normal once in a while.

Turn off the charge, then turn it on, and it's OK!

How do I activate my phone's battery?

Just change the charging cable.

Hello, the reason why the phone can't be charged: 1. Check whether your charging device is normal, unplug it and replug the device to try. 2. If there is a problem with the charging interface, if there is no problem with the charging equipment, it means that there is a problem with the mobile phone you are using, and it is recommended that you restart the mobile phone before connecting the charging device.

3. If it is still unresolved, you can play music.

The reason is that there are too many times when you charge and are not full,LETV uses an ecological memory system,You can activate the battery,Turn off and charge until the accident of the green light is on, and then charge it for a while,Next time you must remember to be fully charged,

It may be that your phone's data cable is not matched.

My previous phone was a Meizu cable, and it was restarting all day.

Then I changed to the original data cable I bought, and it was fine.

Just buy a new charger and charge it right away.

1.Turn off the device, remove the SD card and SIM card, and recharge it.

2.Clean the contact points of the battery and the phone battery.

3.Connect the cable to the computer to charge.

4.Replace the data cable.

Here's how:

1.It may be caused by excessive dust accumulation, check the phone charging socket for dust, and if there is dust, wipe it with a small brush.

2.It may be that the data cable is broken, try a new data cable.

3.Turn off the phone to charge it and see if it can be charged.

4.Replace the charging position to eliminate intermittent charging problems caused by poor contact with the socket.

5.Factory reset your phone.

6.The phone is equipped with a third-party plug-in such as Kingsoft Battery Doctor, which can be uninstalled and tested.

7.If the above methods do not allow your phone to charge, it is recommended to go to a repair shop for maintenance.