What to do if the drain is leaking? How to deal with drain leakage

Maintenance method: 1. Try to pull out the sewer pipe at the bottom, confirm that the second level has been pressed, and then use a screwdriver or the like to top the sewer cap from the bottom to the top;

2. Warp directly from above with a blade;

3. Find a plumber for a new one.

The problem of the wash basin drain valve pressing down and sinking into it is the problem of the bouncing inside, either the concentricity of the bouncing is not enough and the lid is one-sided, the thermal expansion and cold contraction cannot be bounced, or the bouncing core is broken, but there are few bouncing cores sold on the market.

In the bouncing drainer, the bouncing valve core inside the sewer is the most susceptible to breakage, and every time it is pressed and bounced, there will be a small part of wear, and it will not be pressed down when it is ground to a certain extent.

If it is said that it can't bounce up during use, it may be that the buckle is blocked by a foreign object or too long (too long generally does not exist in this situation), and there may be a problem with the spring.

Open the drain valve, check the leakage in the drain, if it is a leakage caused by cracking, you need to replace the drain again; If there is a leak at the joint, it means that it is caused by poor sealing, and then you can re-wrap it with raw tape.

1. If the water leakage is not particularly serious, you need to find out whether there is a problem with the water valve, you can close the water valve first, and then take a look at it after a night, if the water leakage problem has been reduced, you need to replace the water valve.

2. If there is no problem with the water valve, the problem is in the connected pipe. First of all, it is necessary to find out the leakage point, and wrap it with tape to solve the problem.

I believe that many people are still familiar with the sewer, because whether in the kitchen or bathroom, many people will use the sewer in their homes, especially in the connection of the washbasin, which needs to be installed. If there is a leakage problem in the drainer, it must be solved in time, otherwise the problem of water leakage will become more and more serious. Today, I will solve the problem of drain leakage for you.

1. What should I do if the drain is leaking?

1. If the water leakage is not particularly serious, such as the sound of dripping and clicking, we need to find out if there is a problem with the water valve, you can close the water valve first, and then come back to see it after a night, if the water leakage problem has been reduced, you need to replace the water valve.

2. If there is no problem with the water valve, the problem is in the connected pipe. For example, if there is a water leakage problem in the pipeline, you first need to find out the leakage point, and you can solve the problem by winding it with tape, and the method is relatively simple.

3. If the connection between the washbasin and the sewer is not particularly in place, in this case, Tan Qiaozhi is only wound with raw rubber tape, which may not solve the problem, and only the glass glue can effectively solve the water leakage. When playing glass glue, you should pay attention to it, it must be evenly beaten, and it can not be too thick, so that the problem of water leakage can not be effectively solved, and after coating glass glue, it generally takes a day to dry out, and you go to check whether the washbasin has similar problems again.

4. There is also a possibility that the sewer is damaged, and the sewer needs to be replaced, and the sewer needs to be replaced directly, and the hardware store should buy a new sewer, which should be selected according to its pipe diameter, and some are U-shaped pipes, which should coincide with the thread containing sensitivity. If you don't know the size of the drainer, you can disassemble the old drainer and take it to the hardware store and ask the boss to help you choose.

2. What is the general width and delay size of the washbasin drainer?

The size of the drainer is about the same, for example, if you measure the diameter from the upper part of it, it can reach about 60 mm, and if you choose the diameter of the thread, the size is about 40 mm, and from the lower part of it, the diameter is about 30 mm, and its height can reach 190 mm.

There is also a large-head drainer, which can reach a diameter of 65 mm, and we need to choose the appropriate one to match.

The above content is about if there is a leak in the drain, you first need to find out what caused it, and then you can solve the problem.

Bathrooms are usually equipped with washbasins, but after being used for a long time, they are prone to leaking drains. So when you encounter the problem of drain leakage, how should you deal with it? Next, I will briefly introduce to you how to deal with drain leakage.

1. If there is a leak in the basin cabinet drainer, we must first clarify the cause of the leakage. We can turn off the water valve and pour water into the basin, and after a while, there is a large decrease in the amount of water, which means that there is a problem with the water valve. The leakage of the water valve may be caused by the raw tape not being wound properly, so we re-wound the raw tape.

If the glass glue between the countertop and the drainer is not laid, everyone scrapes off the old glass glue and re-lays the glass glue.

2. If it is not, it may be that the water valve is damaged. You can buy a new drainer of the same specification and model, disassemble the old drainer, and reinstall the new drainer. If there is no problem with the water valve, there is a problem with the drain pipe, and everyone should replace the leaking sewer pipe.

3. There are various types of sewers, which can be divided into clamshell type, press type and other types. Clamshell drainers can take away almost all the garbage, but they can easily cause pipe blockages. The bouncing drainer has a filter that can filter out large garbage, but if you forget to clean it, it will cause the drainer to have a peculiar smell and slow drainage.

You can choose different types of drainers according to your needs.

4. There are many types of drain pipes for sewers, you can choose 32 combined sewer pipes with anti-odor square boxes, this kind of sewer pipes are easy to install, the quality is good, and the height can be adjusted. There are also quantity materials for sewer pipes, and this type of sewer pipe is easy to leak and be damaged, so you must be cautious when purchasing.

Summary: Regarding how to deal with the leakage of the sewer, I will introduce it to you here. I hope that after reading this article, I can provide you with reference and help when removing dust and dealing with drain leakage in the future.

Although the drainer is inconspicuous, it is also very important, and everyone should choose carefully when purchasing.

To see who is responsible, the first thing to do is to confirm the cause of the main pipe leakage.

Division of responsibility: If there is a water leak due to decoration, it is the responsibility of the decoration company. If it is not the water leakage caused by the decoration company, it is the property responsibility, and if there is no 2-year warranty period for the main pipeline, the property can find the construction unit to pursue responsibility.

If the warranty period has passed, only the property can compensate for it.

You can hire a housing appraisal agency and invite the property to be present to identify the renovation pipeline, determine the specific responsible person, and then ask for compensation. Article 51 of the "Property Management Regulations" water supply, power supply, gas supply, heating supply, communications, cable television and other units.

It shall bear the responsibility for the maintenance and maintenance of relevant pipelines and facilities and equipment in the property management area in accordance with the law. Where the units provided for in the preceding paragraph temporarily occupy or excavate roads or sites due to the need for repairs or maintenance, they shall promptly restore them to their original state.

Treatment method of leakage of main sewer pipe in bathroom:

1. You can check the degree of water leakage, if it is only a slight water leakage, you can use glass glue to bond it on the leakage position.

2. If there is water leakage at the joint of the pipeline, you can use glass glue to bond it at the joint, and after the glass glue solidifies, wrap a layer of waterproof tape on the outside to play a role in secondary protection.

3. If the water pipe is broken, you can replace it with a new water pipe, cut the broken water pipe with a cutting machine, and then replace a water pipe with the same size and specification, and connect it together with a joint.

If there is a leak in the main sewer pipe at home, it is also necessary to repair it according to the actual situation, and you can also find a professional maintenance worker to help repair it.

So what to do about a drain leak? What are the ways to repair a sewer leak? In fact, to solve this problem, we must first find out what the cause of the sewer leakage is, some are only slight leaks, and some are a large amount of water seepage.

The following is an introduction to some common sewer leakage judgment methods and maintenance methods.

Causes of sewer leakage and repair tips.

1. Causes of sewer leakage.

There are many reasons for sewer leakage, if you don't know where the cause is, it is best to find a professional test, so as to ** the problem of water leakage. Generally, there are two reasons, one is due to water seepage on the ground, and the other is a broken sewer pipe.

1. Damage to the sewer pipe: For example, the floor drain, the interface of the toilet, and the upper and lower sewer pipes are damaged, and the inspection methods are:

Water pipes. If the water supply pipe leaks, it may show continuous and uninterrupted leakage, and sometimes the leakage is increasing. If the main valve of the water pipe is closed, the amount of leakage is immediately reduced.

Sewer pipes. If there is a leak in the sewer pipe, we need to observe it and keep a record of the leakage. The method of closing the sail of the test book is very simple, we only need to open all the faucets in the bathroom, flush the toilet many times and pour water into the floor drain, if the leakage increases, it means that the pipe is damaged and leaking.

2. Surface leakage.

The surface leakage detection method is very simple, and it is generally manifested when taking a bath, mopping the floor, or when the ground and wall are drenched and stagnant, and the leakage can be determined as surface leakage.

Second, sewer leakage repair skills.

Generally, there are more sewer leaks in toilets, and there are many pipes, and the water vapor is relatively large. Then at this time, you can only plane tiles, change pipes and pipes, and redo waterproofing. If it's just surface water seepage, you can use the following methods to repair it:

1. Treatment of the grassroots level. Dust, oil, and stagnant water are treated cleanly and kept dry;

2. The wall of the general toilet and the hail surface of the prefecture can be drenched with water, so spray the penetrating waterproof agent on the surface, and remember not to miss the spray;

3. After the waterproofing agent is dry, all tile joints, damages and defects should be filled with waterproof paste;

4. The weak places are reinforced with plastic steel mud edge sealing, especially the corners, wall edges, pipe roots, etc.

How to deal with kitchen sewer leakage:

1. First of all, turn off the main gate of tap water, find a professional to investigate, and after finding the leakage point, you need to punch holes in the ground for maintenance.

2. During maintenance, wipe the leaking pipe, repair the leaking place with glue, and then wrap it with waterproof tape.

3. Next, open the sluice gate to test the water, observe for about 10 to 20 minutes, and after there is no water seepage, it can be sealed.

Tips for unclogging sewer pipes

1. When the pipeline is blocked, you can pour the pipeline dredging agent into the sewer pipe, if there is no water in the pipe, you should pour half a cup of clean water into the water pipe, wait for about 20 minutes, and then flush the pipe with a large amount of water. You can also put some caustic soda at the sewer pipe and pour a pot of boiling water into it, as long as the sewer pipe is dredged.

2. If the sewer pipe is blocked with some oil, pour boiling water directly into the sewer pipe, or you can buy some concentrated sulfuric acid, which can also play a good dredging effect by pouring these into the sewer pipe. Or go to the store to buy the powder to clean the pipes, it can be said that these ingredients are also lime powder, which can also play a good pipe cleaning effect.

The sewer pipe has been used for a long time and is prone to water leakage, and the treatment methods are as follows:

1. If the leakage is at the tail of the pipe, and there are serious cracks. You need to use a tool to see off all this part first, then connect a new section of sewer pipe to this part, and use the joint to connect it with the old water pipe and fix it.

2. If the leakage is at the joint, and it is only a little bit of water leakage, it is not very serious. You can check the cause of the water leakage first, and if it is caused by a loose joint, you can tighten it directly. However, if it is caused by damaged joints, you can replace them with new ones.

3. If the surface crack is caused, and the crack is not very large. In this case, you can repair it with glue or cloth tape to clean the cracked surface, and then apply an appropriate amount of glue to dry before continuing to use, or wrap it around the area with a cloth tape.

4. Before installing the water pipe, it is necessary to estimate the amount and estimate the approximate amount needed, so as to prevent the reality of material waste or lack of purchase. At the same time, for the renovation of second-hand houses, it is necessary to replace all the water pipes inside to prevent the problem of pipe leakage in the future.

5. When installing the water pipe, it is necessary to check its quality and accessories to see if there is leakage or damage. It is very important that the water pipes and fittings used are strong and must be tested before use.