How is limescale formed on a stainless steel sink in the kitchen?

Kitchens with heavy smoke often make it more difficult for us to clean, and stainless steel sinks are essential for cooking! In oil stains for a long time "devastated.""Below, the scratches or oil stains are not cleaned up, and it is easy to breed bacteria when it is ugly! Let's change it again, it's troublesome and expensive.

Don't worry, clean it right, it's like you're using a new sink every day. Stainless steel sinks are generally not easy to rust, and the rust spots are generally after decoration, because there are often iron filings and rust water in the water pipes of the new house decoration, and these impurities precipitate on the surface of the sink to form rust spots.

The specific cleaning process requires the use of detergents and coatings during the cleaning process, so be sure to wear gloves so as not to hurt your hands. First of all, apply a layer of detergent to the dry stainless steel sink, and use a sponge to wipe the edges and corners of the sink. Wait until the stainless steel sink is completely covered with detergent, wait for it to dry for 20 minutes, and then wipe it clean with a clean paper towel.

Wait until the coating is completely applied, then wait for the coating to dry, which takes about 3 hours, and wait for 6 hours for the coating on the stainless steel sink to harden completely, so that it will be visually shiny and shiny, just like a newly bought stainless steel sink. It will be like a runny nose, first find a tissue to block it or wait for the plumber to come to the door of the above practice, it is better to do it yourself to repair it, so as not to annoy the personnel has been restless!

The second is to use a neutral detergent with water to rinse the unwiped areas of the paper towel containing detergent, then wipe off the excess water, and then wait for it to dry thoroughly. Finally, apply a coat to the stainless steel sink. NoteWhen applying, you should not apply it back and forth, but from the back to the front.

The entire application process is fromAround the faucet edge dents the side walls of the bottomThis allows you to take care of all the corners of the sink without causing problems with repeated application. Often use the kitchen, do not pay attention to the maintenance of the stainless steel sink, put some lemon juice.

Melon vegetables, noodle soup, etc. are poured into the sink, and then the organic juice adheres to the stainless steel surface, and in the presence of water and oxygen, it constitutes organic.

It is the impurities in the tap water, the general water will be like this if it is not filtered and softened, you can install a filter pump under the kitchen water pipe, until it will become soft, people are healthier to drink, and it is not easy to have scale.

I think it's some bacteria that accumulate after using water for a long time, and then these bacteria slowly multiply and form and end up with a stainless steel sink with limescale on it.

Formed over time, it will leave some dirt when it is used, and it will cause scale if it is not removed in time.

1. Sometimes, in the newly renovated house, the dust with minerals or acids and alkalis falls on the surface of the sink, which will cause "floating rust" when wet;

Second, the water quality in many areas of China is poor, and most of the water pipes are galvanized pipes, and the content of iron and other elements in the water is high. After the basin is used, if there are more water stains left, the iron in the water will rust after a long time, especially for new house decoration. If the long-term residual water in the water pipe leaves water stains on the basin and is not cleaned in time, it is easy to cause "floating rust";

3. When the kitchen is decorated, welding chips, cement, oil stains, etc. remain on the surface of the basin, which may cause rust and mildew if not cleaned in time;

4. Chemical agents, cleaning agents, paints, sauces, oils, etc. remain on the surface of the basin, and for a long time, it will cause mildew to stick to the surface of the basin;

5. Kitchen knives, scissors, bottle openers and other steel items placed on the surface of the basin for a long time will cause "floating rust", mold or discoloration;

Stainless steel sinks should not be pure, the method of removal:

1. Take a fine sand paper and rinse with water.

2. Wipe with 15% acetic acid solution, soak the rusty part of the sink in the solution, and rinse it with water after a few hours.

3. Wet the rust with 10% citric acid solution, then soak it in concentrated salt water and clean it the next day.

Maybe the stainless steel material is not good, only grinding off.

Many people will find that the living sink is particularly easy to rust after being used for a long time, but,Rust in the sink is caused by a variety of reasons, and only by understanding the cause of its rust can we better solve the rust problem.

The surface of the sink is rusty

This

Most of the rust phenomenon occurs within a few days of moving in after buying a new houseThis rusty condition is mainly caused by corrosive liquids, gases, metal dust brought by the newly renovated house, or by the long-term contact of the sink with some acidic or alkaline substances, if onlySlight surface rust can be dipped in a cotton cloth, coated with toothpaste on the surface, and then rubbed repeatedly in a clean environment, rubbing along its lines two or three times.

The sink is deeply rusted

Generally, deep rust is mostly a phenomenon that occurs after a few years of useAfter all, metal sinks are certainly not immune to rust, and for this type of rust problem, you canpicking

Use talcum powder to treat, with rust removal water or 300 mesh sandpaper, everything is ready, pour the material into the rusty position, wipe it repeatedly, remember not to get the material to the position of no rust, otherwise there will be a reaction.

The sink is suspected to be rusty

If the sink is not wiped clean after daily use, or if the sink comes into contact with water with high iron content, it will cause brownish-red staining marks to appear on the surface of the sinkThere are many people who mistake this phenomenon for a rusty sink, but in fact it is not, for this phenomenon, everyoneYou can use a low-concentration vinegar solution to remove these deposited staining marks, gently wipe them with a towel, and finally clean the sink with clean water.

Slight rust can be removed by dipping a cotton cloth in toothpaste and wiping repeatedly, and more serious rust can be removed by scrubbing along the drawing lines with scouring pad and toothpaste.

If there is only a slight rust on the surface, you can use a cotton cloth to dip it, apply toothpaste on the surface, and then wipe it repeatedly in a clean environment, and rub it two or three times along its lines.

Soaking with vinegar and then brushing the sink with barbed wire can handle well.

Choose anti-rust paste on the market to remove the surface stains or rust, and then clean it with water or weak alkaline soapy water;

Just brush it with an iron brush, or mix it with water and vinegar, you can remove it.

You can choose to clean it with baking soda so that it can be cleaned effectively.

Baking soda can effectively prevent rust, and it can be removed by soaking it overnight.

Embroidery can be cleaned with vinegar, or you can buy laundry detergent to remove it.

There are many kinds of materials for sinks in life, and stainless steel sinks are one of them, so you must pay attention to what causes water stains in stainless steel sinks when using stainless steel sinks. How should we prevent rust in stainless steel sinks, the following is an introduction to the prevention of stainless steel sink water stains and methods.

The cause of water stains in stainless steel sinks.

The cause of water stains in a state shed and stainless steel sink.

1. Sometimes, the dust with minerals, acids and alkaline in the newly renovated house falls on the surface of the sink and the surface of the sink will also cause relief embroidery;

2. The water quality in many areas of our country is poor, and most of the water pipes are galvanized pipes, and the content of iron and other elements in the water is high.

3. When the kitchen is decorated, welding chips, cement, oil stains, etc. remain on the surface of the sink, which may cause rust and mildew if not cleaned in time;

4. Chemical agents, cleaning agents, paints, sauces, oils, etc. remain in the sink for a long time, which will cause mildew to stick to the surface of the sink.

5. Kitchen knives, scissors, bottle openers and other steel items placed on the surface of the sink for a long time will cause relief, mildew or discoloration;

2. Prevent water stains in stainless steel sinks.

1. In case of relief embroidery and mildew, you can apply toothpaste to the rust spots and spots, and scrub them clean with a scrubbing cloth.

2. When the kitchen is decorated, the sink is installed, and the long-term residual water in the water pipe is drained before installation, and the sink is thoroughly rinsed after installation;

3. Do not leave kitchen knives and bottle openers in the sink for a long time, especially do not scrub the sink with steel wool balls;

4. Clean the sink after each use, and leave no stolen goods and water stains;

3. Methods to prevent water stains in stainless steel sinks.

1. Peel cleaning method: use grapefruit peel, apple peel and other peeled peels to clean, and use the part of the pulp to wipe the water stains repeatedly, which is trouble-free, effective and fragrant.

2. Scrap cleaning method: Vegetable scraps, such as celery root, radish whiskers, onion skin, etc., can be used to wipe water stains, which is convenient and effective for saving silver.

3. Loofah gourd cleaning method: sprinkle some cooking wine on the loofah gourd, and wipe the water stains repeatedly, not only the water stains are nowhere to be seen, but also the stainless steel sink is shiny.

4. Overnight tea cleaning method: Sprinkle some overnight tea leaves in the sink, and use an old toothbrush dipped in the tea leaves to brush the water stains repeatedly, which can quickly remove the water stains.

That's all for you:, I hope it helps.

It is best to choose the thickness in between, so that the sink has toughness and can avoid damage caused by collisions and other types of porcelain to the greatest extent. The easiest way to buy is to press the surface of the sink lightly, if you can press it, it means that the material is too thin and the quality is poor. Its different functions and materials provide a variety of choices for the public, as kitchen utensils that are often eroded by water, oil and acid and alkali and other substances should meet the requirements of wear resistance, heavy pressure resistance, easy cleaning, high temperature resistance, and corrosion resistance, but how to choose the right sink for your home in a variety of material products should be discussed.

You can choose a small single slot, the general size is 500*400;Generally, the size of a single tank is 600*450, and the length of a large single tank can reach about 700; The size of the double tank is 800*480. In order to facilitate the cleaning of pots and pans, it is recommended to buy a large sink that is about 20 deep. Depending on the kitchen layout, the sink location determines the size of the sink.

The "Jade Wrench" platform is a resource sharing platform for construction and related industries. Recruitment, job search, machinery rental and sales, material procurement, construction waste trading, and project financing are all on the Jade Wrench platform.

<> pressed sink material is thin and the faucet is easy to loosen when reused, and the manual tank frame is thick and not easy to loosen, this is the difference between the two sinks, it is recommended to buy a manual single sink, the pot can be put into the tank when washing the pot, the double sink pot can not be put in and it is inconvenient to wash the pot, personal opinion for reference.

If the kitchen countertop operation space at home is relatively large, it is okay to choose single slots and double slots, mainly depending on personal preferences; If the kitchen countertop operation space is relatively small, it is not recommended to choose double sinks, which is very inconvenient to use. Generally speaking, high-quality sinks are made of imported 304 stainless steel plates, and their thickness is usually 1mm, but the sinks in ordinary places are used between, so the identification method can be directly identified from the two dimensions of weight and thickness.

The kitchen sink is made of stainless steel, one is good acid resistance, anti-oxidation, strong and durable, and the second is that it is dirty, easy to clean, waterproof, oil-proof, and third, scald-proof and high-temperature resistant!

Compared with other materials, stainless steel sinks meet the requirements of wear resistance, heavy pressure resistance, easy cleaning, high temperature resistance and corrosion resistance. It saves a lot of worry in the process of daily use. And stainless steel sinks are more durable and can be used until you don't want to.

As we all know, iron products and water will rust after a long time, and rust will fall off unhygienic, compared with iron, the advantage of stainless steel is that it will not rust when in contact with water for a long time, so there is no need to regularly remove rust from the sink, and the service life will be increased.

The stainless steel kitchen sink is more conducive to cleaning and cleaning when in use, and it looks cleaner, neater and more hygienic after cleaning, and it is comfortable to use.

1. Vinegar and baking soda: first add a certain amount of water to the pot, then add vinegar at a ratio of 10%, and then put a small spoon of baking soda, and the scale will be removed naturally after boiling for a period of time.

2. It should be noted here that there will be a lot of foam after the water with vinegar and baking soda is boiled, which will quickly overflow, and the electric shock will produce a burst sound, and there is a possibility of short circuit, so at this time, it is necessary to control the water not to overflow after boiling. At this time, you can turn down the heat, if it is an electric kettle, you must put a small amount of water, and it is strictly forbidden to come out.

After stainless steel appliances are used for a long time, scale will appear, then we need to clean up, so how to remove scale without hurting stainless steel? It can be cleaned with baking soda, potato skins, eggs, thermal expansion and cold contraction, etc., which can remove limescale without damaging the stainless steel. If you want to know more about it, you can read on.

1. Baking soda: You can use a stainless steel utensil with limescale to boil water, put 1 teaspoon of baking soda in the water, and the scale will be automatically removed after boiling for a few minutes.

2. Potato skin: You can also use potato skin to remove scale, boil water with stainless steel utensils, then put in potato skin, wait for the water to boil, and then boil for about 10 minutes to remove.

3. Eggs: Boiled eggs can also remove the scale of stainless steel, and the scale can be removed by boiling the eggs twice in a stainless steel pot with scale.

4. Thermal expansion and cold contraction method: you can put the stainless steel utensils on the stove for dry burning, and after burning to the bottom with a "bang" sound, take it off and quickly inject cold water, and the scale at the bottom will fall off due to thermal expansion and cold contraction.

Through the above article, I believe you all know the answer to the question of "how to remove scale without damaging stainless steel". So why does stainless steel have scale? Water contains more calcium, magnesium and other mineral components, when it is heated in the process of reaction, part of the water evaporates, insoluble substances will be generated and precipitated, thus forming scale in the kettle.