-
1. In the use of aluminum alloy doors and windows, the action should be light, and the push and pull should be natural; If you find that there is difficulty, do not deadlift and push, and the fault should be eliminated first. Dust accumulation and deformation are the main reasons for the difficulty of aluminum alloy doors and windows, and it is necessary to keep the door frame clean, especially the cleanliness of the sliding groove. A vacuum cleaner can be used to suck up the dirt in the trough and the door seal.
2. When cleaning aluminum alloy doors and windows, people should not step on the aluminum frame, nor should they pull the frame for support.
3. Aluminum alloy doors and windows can be dipped in water or neutral detergent with a soft cloth, do not use ordinary soap and washing powder, and do not use detergents, toilet detergents and other strong acid and alkali detergents.
4. After the rain, the wet glass, doors and window frames should be wiped out in time, and special attention should be paid to wiping off the water in the chute. If the chute is used for a long time and the friction force increases, a little engine oil can be added or a layer of fire wax oil can be applied.
5. The connecting parts of the aluminum alloy frame should be checked frequently, and the bolts should be tightened in time to replace the damaged parts. The vulnerable parts of aluminum alloy doors and windows such as positioning axle pins, wind braces, and floor springs should be checked from time to time, and lubricating oil should be added regularly to keep them clean and flexible.
6. Sealing wool strip and glass glue seal are the key structures to ensure the sealing and thermal insulation of doors and windows, and should be repaired and replaced in time if they fall off.
7. Frequently check the joint of the aluminum alloy frame wall, if it is loose for a long time, it is easy to deform the frame as a whole, so that the doors and windows cannot be closed and sealed. Therefore, the loose screws at the connection should be tightened immediately, such as the loose screw footing, and a small amount of cement should be adjusted with epoxy super glue to seal it.
-
My thinking is like this, among the metal doors and windows, aluminum alloy doors and windows are deeply loved by the public. Whether it is sealing, rain-proof function, weather-resistant strength, etc., doors and windows, like our cars, also need daily maintenance. When cleaning aluminum alloy doors and windows daily, you must not step on the sliding frame for cleaning, nor can you pull the frame for support, door and window sealing strips are divided into glass sealing strips and wool strips, which are the key to ensuring the sealing, insulation and waterproofing of aluminum doors and windows.
Often, the seals will deteriorate over time and may fall off. Therefore, if found, it is necessary to repair and replace it in time as soon as possible, and when cleaning aluminum alloy doors and windows, do not use coarse and hard paper or rags to wipe them, which will cause a certain degree of wear and tear on the doors and windows, thereby causing damage to the anti-oxidation film. The correct way to do this is to wipe it with a soft cloth slightly moistened with water or neutral detergent.
Cleaners with strong acids and alkalis, such as ordinary soap, laundry detergent, detergent, toilet cleaner, 84 disinfectant, etc., cannot be used to wipe aluminum alloy doors and windows, and should be kept as dry as possible. After the rain, the raindrops on the glass and door and window frames should be wiped in time to avoid rust on the hardware, pay special attention to the water accumulation of the chute, wipe it dry in time, and clean it up in time if there are foreign objects. If necessary, the chain can be placed in the corner of the door and window, and only small packets of dry lime or other desiccant can be placed to keep it dry.
It is necessary to check the hardware of aluminum alloy frequently, if there are damaged or rusty parts, they should be replaced in time, and if necessary, they can add some lubricating oil to the vulnerable parts of doors and windows such as fixed axle pins, wind braces, ground springs, etc., to keep the doors and windows open and close smoothly. If the screws are loose at the joints of doors and windows, they should be fixed immediately. If the above is not detailed enough, you can consult the Nanus doors and windows brand, the above content is limited, it is recommended that Liannanus doors and windows brand, located in Sanfan Peishui District, Foshan City, is a professional service provider engaged in aluminum alloy doors and windows.
It's a pleasure to be able to answer your questions and I wish you all the best in your work.
-
1。When using aluminum alloy doors and windows, they should be lightly loaded and pushed and pulled naturally; If you find it difficult, don't force it, but get rid of the problem first. Dust accumulation and deformation are the main reasons why aluminum alloy doors and windows are difficult to make.
Keep the door frame clean, especially the chute. Dust build-up on the door seal, grooves, and top can be sucked up with a vacuum cleaner.
When cleaning aluminum alloy doors and windows, do not step on the aluminum frame and do not support the frame.
3. Aluminum alloy doors and windows can be dipped in soft cloth with water or neutral detergent. Do not use ordinary soap and laundry detergent, let alone use strong acid and alkali detergents such as laundry detergent and dish soap.
4. After the rain, the damp glass and door and window frames should be dried in time, and special attention should be paid to wiping the stagnant water in the chute. The chute is used for a long time, and the friction will increase. You can add a little oil or apply a layer of wax oil.
5.Frequently inspect the connecting parts of the aluminum alloy frame, tighten the bolts in time, and replace the damaged parts. The wearing parts of aluminum alloy doors and windows, such as positioning pins, wind braces, floor springs, etc., should be checked frequently, lubricated regularly, and kept clean and flexible.
Capping and glass glue sealing are the key structures to ensure the sealing and insulation of doors and windows. If it is dropped, it should be repaired and replaced in time.
7.Regularly inspect the junction of the aluminum alloy frame with the wall. If it is loose for a long time, it is easy to deform the whole frame, so that the doors and windows cannot be closed and sealed.
Therefore, if the screws at the connection are loose, they should be tightened immediately. If the screw base is loose, a small amount of cement should be used to seal it. Huachang Aluminum Factory specializes in the production of industrial profiles.
-
Methods of maintenance of aluminum alloy doors and windows:
1. Push and pull gently.
When using aluminum alloy doors and windows, remember to push and pull hard, should follow its nature, if you find that the push and pull are obstructed, do not exert force, should check whether there is something obstructed or the door and window are deformed. Aluminum alloy doors and windows should also be cleaned frequently and kept clean, especially the sliding groove, if there is dust, it will easily affect the sliding sliding.
2. Do not squeeze the aluminum frame.
Generally speaking, when cleaning aluminum alloy doors and windows, it is best not to stand on the aluminum frame, the weight of the person will easily cause the deformation of the aluminum frame for a long time, and do not use the aluminum frame as a support.
Third, choose the appropriate cleaning agent.
Aluminum doors and windows can not use detergent powder or toilet detergent and other strong acid and alkaline detergents, these cleaners will corrode aluminum doors and windows, can not use soap or washing powder, generally wash with water.
Fourth, it is strictly forbidden to accumulate water in the chute.
If rainwater is accumulated in the chute, the wet glass, doors and window frames should be wiped in time, and special attention should be paid to wiping the water in the chute. If the chute is used for a long time and the friction force increases, a little engine oil can be added or a layer of fire wax oil can be applied.
5. Check the vulnerable parts from time to time.
Check the vulnerable parts of doors and windows from time to time, add lubricating oil regularly to keep them clean and flexible, check the frame link parts from time to time, tighten bolts in time, replace damaged parts and sealing strips and glass seals.
-
Aluminum doors and windows can be scrubbed with a soft cloth dipped in water or neutral detergent, not ordinary pancakes and laundry detergents, and detergents with strong acids and alkalis such as detergents and toilet detergents can not be used.
After the rain, the raindrops on the glass and door and window frames should be in time, and special attention should be paid to the water accumulation in the chute. If the chute is used for a long time and the friction force increases, a little engine oil can be added or a layer of fire wax oil can be applied.
You should always check the tightening bolts, positioning shafts, wind braces, floor springs, etc., and replace the damaged parts and vulnerable parts of aluminum alloy doors and windows in time. It is necessary to add lubricating oil regularly to insist on being clean and flexible.
In the process of use, aluminum doors and windows should be gently pushed and pulled, and the push and pull should be natural; If you find that there is a difficulty, do not force it, and you should eliminate the fault first. Dust accumulation and deformation are the main reasons for the difficulty of pushing and pulling aluminum alloy doors and windows, and it is necessary to insist on the cleaning of the door frame, especially the cleaning of the groove. A vacuum cleaner can be used to suck up the dirt in the trough and the door seal.
-
In the use of aluminum alloy doors and windows, the action should be light, and the push and pull should be natural; If you find that there is difficulty, do not deadlift and push, and the fault should be eliminated first. Remove dust: When cleaning aluminum alloy doors and windows, people should not step on the aluminum frame, nor pull the frame for support; Remove stagnant water: Wipe off wet glass, door and window frames in time after rain, and pay special attention to wiping off stagnant water in the chute.
If the chute is used for a long time and the friction force increases, a little engine oil can be added or a layer of fire wax oil can be applied. Cleaning method: Aluminum alloy doors and windows can be dipped in water or neutral detergent with a soft cloth, do not use ordinary soap and washing powder, and do not use detergents, toilet detergents and other strong acid detergents. Regularly inspect and repair and replace, as far as I know, Nanus brand aluminum alloy doors and windows, their doors and windows durability, quality and cost performance are good, if you want to decorate and install your home, you can learn about it.
1. Preparation and conditions before spraying:
1.Weather conditions: The coating must be applied under the conditions of fine weather, the construction is prohibited under the conditions of rain, fog, snow and large dust, the optimal temperature for spraying application is about 25, and the humidity is below 80%RH. >>>More
Method of replacing aluminum alloy window pulley:
1. Grasp the window with both hands, push it upwards hard, and then do the "pulling" action inward, and the window will be easily taken down. >>>More
It is difficult to say why the cost-effective aluminum alloy doors and windows brand comes, after all, the positioning of each manufacturer is different, and ultimately it is necessary to return to the product itself, aluminum alloy doors and windows to high-tech, multi-functional development, first of all, there are newer and higher requirements for aluminum profiles, to meet the development needs of new aluminum doors and windows. Therefore, the selection of high-quality aluminum doors and windows is very important to the selection of manufacturers producing aluminum alloy doors and windows. >>>More
Chinese antique aluminum alloy doors and windows can be used in a variety of buildings and places to add a unique classical style and historical atmosphere. Here are some common places and places that are suitable for using antique doors and windows: Residential Buildings: >>>More
Each is good in its own way. Cast aluminum door is the use of modern high-tech processing technology, solid cast aluminum, the whole cast molding, the manufacture of a variety of villa gates, custom villa doors are novel and beautiful, elegant and chic, luxurious and spectacular. Zinc alloy door is a gate made of zinc alloy material. >>>More