How to serve the tray and how to take the tray?

There are two kinds of pallets, one is a flat support, and the other is a lifting support.

Tray posture: 1. Left-handed tray. The left hand is bent 90 degrees upwards with the forearm perpendicular to the left chest.

2. The elbow is close to the waist, a fist distance from the body, the palm is up, the five fingers are separated, the thumb points to the upper left, and the thumb is pointed to the root of the palm and the other four fingers support the bottom of the plate. The palm of the hand is naturally concave, and the palm of the hand does not contact the bottom of the plate.

3. Make the center of gravity always on the five hands, the finger ends of the fingers and the base of the palms: flat in front of the chest, slightly lower, in the chest 0.

Precautions: 1) Master the posture of the tray. According to the order of the required consignment items, the heavy objects and high objects are generally placed on the side close to the body, so that it is easy to grasp the center of gravity of the pallet; Then put light objects, low objects or items that are sent first on the outside of the plate to make the items in the plate properly distributed.

2) When cleaning up the tableware on the countertop, it should be plated separately according to the order of napkins, towels, glassware, and porcelain tableware to avoid damage caused by collision between items of different textures.

3) Wine bottles and beverages should be plated according to different specifications of large and small, and a finger space should be left between the bottles, not close together, so as to avoid the sound of collision when lifting and walking.

I hope it helps you and I wish you a happy life!

2. Supporting cherry blossoms: Put the required items in the back position in accordance with the principle of high, heavy and backward use, that is, close to the side of the body, and put the short, light and first used ones in the front position of the tray.

3. Lifting: Hold the edge of the tray with the left hand, pull out two-thirds of the tray with the right hand, support the five fingers of the left hand at six points, put it under the tray, hold the tray with the right hand, and release the right hand after the center is mastered.

4. Pinto: head straight, neck straight, eyes looking ahead, smiling, walking on the right side of the corridor. If you meet a guest, turn sideways, make a protective gesture with your right hand and nod your head to say hello.

5. Drop support: Hold the edge of the tray with your right hand, withdraw with your left hand and put one-third of the tray on the food preparation cabinet, and slowly push the tray forward with your right hand.

6. Homecoming: Place the tray smoothly on the food preparation cabinet, place the high, heavy, and later items in the tray at the back of the food preparation counter, and put the short, light, and first used ones in the front position. And put the tray back in place.

Summary. Hello dear! The procedure for pallet operation generally includes the following seven steps:

Hello dear! The procedure for pallet operation generally includes the following seven steps:

1.Preparation: Check the quality, size and weight capacity of the pallets, etc., as well as the performance and condition of the forklift or trolley used.

2.Picking goods: Pick the required goods from the shelves or stacking areas as needed and stack them on pallets in the prescribed manner.

3.Lashing the goods: Use straps or ropes to secure the goods to the pallet to prevent the goods from slipping or being damaged during handling.

4.Loading pallets: Load the tied goods smoothly on the pallet, paying attention to the balance of the center of gravity of the goods and the stability of the pallet.

5.Transport pallets: Use forklifts or trolleys to transport loaded pallets to the destination, paying attention to driving safety and the stability of the goods.

6.Unloading the pallet: Place the pallet in the unloading area, and use a forklift or trolley to unload the goods from the Yubend pallet, paying attention to the safety and stability of the unloading.

7.Cleaning work: Clean up the rubber pallets used next to Jianyuan and the straps or ropes used when tying the goods, and put them back to the designated storage location for the next use.

It should be noted that in the process of pallet operation, it is necessary to pay attention to the stability and safety of the goods and pants, choose the appropriate forklift or trolley for handling, and abide by the relevant safety regulations to ensure the safety of personnel and goods.

Hello dear, The seven steps of the operation procedure of the tray are untending, loading, palletizing, walking and unloading, Tray unscrambling: basically the same as the light support, the appropriate size of the pallet should be selected. It is very important to do a good job of cleaning, and only by cleaning the oil stain in the plate in time can we avoid the accident of object sliding.

Plating: Make the items in the tray evenly and decently classified, so that the weight of the items is evenly distributed in the plate, and pay attention to the coordination of the items according to the height and size, and do not mix the items without layers, so as not to cause damage to the tableware. When plating, there should be an appropriate space between objects.

In order to avoid the sound of collision when the end support is walking. Tray: Heavy support is also called shoulder support, the posture of heavy support is to move the tray to the side of the service desk with both hands, so that half of the tray is suspended.

Hold the tray flat with your right hand, spread your feet apart in a figure-eight shape, squat down with your legs, slightly squat into a crotch posture on horseback, and bend your waist slightly forward. Stretch out your five fingers with your left hand to hold up the bottom of the plate. I hope my answers can help you and have a great day.

1. End support method rolling state: tray end support service According to the different items of the end support and the different uses of the tray, the end support method is divided into the following two types: chest support method:

The head is flat and the shoulders are flat, the eyes are smiling in front of the eyes, the arms are naturally closed, the lower arm of the left hand is stretched forward and the upper arm forms a 90-degree angle, the five fingers are separated from the root of the palm to form a land force point to support the tray, the palm is suspended in the air, so that the land point is evenly stressed, the elbow of the left hand is a fist distance from the waist in order to maintain balance, the right hand can be carried behind the body, and it can also be used to protect the posture of the tray, so that in case of an accident, it can be dodged and avoided in time.

2. Bend the left hand upwards on the shoulder (heavy support), the elbow is about 15 cm from the waist, and the forearm is parallel to the body. The palm is slightly higher than the shoulder 2 cm, the five source fingers are naturally separated, the thumb is centered on the left shoulder, and the other four fingers are separated from the upper left, using the five fingers and grasping the balance of the tray.

Divide the fingertips and the base of the palm, and keep the center of gravity on the palm or slightly inside the palm at all times.

The characteristics of the tray are divided into: according to insulation, according to texture, classification standards. Specifically.

1. According to insulation

Anti-static, surface resistance of 10 to the power of 6 to the power of 10, conductive, surface resistance of 10 to the 6th power or less, insulation, surface resistance of 10 or more to the power of 12.

2. According to the texture

Wood is made of wood or bamboo materials, and is generally used for handicrafts or decoration. Metals are generally made of stainless steel, which is mostly used to place items and is not often moved. Due to its light texture, easy to use, and anti-slip function, plastics are mostly used in the service industry.

Plastic wood is made of plastic wood composite materials, which has a wide range of uses, energy saving and pollution reduction.

3. Classification criteria

According to the pallet material, use, table, forklift mode and structure, there are various types of pallets. Especially in some occasions that require fast operation, due to the high efficiency, safety and stability of pallet operation, countries have developed a variety of special pallets. For example, flat glass container trays, tire trays, long size trays, oil drum trays, etc.

There are many kinds of pallets, with a wide range of applications and pivotal jointness, in the efficiency of various logistics links such as loading and unloading, storage, transportation and packaging, are in the central position, and have a very important connection function, so although the pallet is just a small appliance, its specifications and sizes are the core of packaging size, carriage size, and container unit size.