What is under the pot of the orchid, and what pot is used for the orchid

In fact, most of the yellow leaves of the orchid are due to the poor growth of its root system and the poor respiration of the root system, which leads to the adverse impact on the growth of the whole plant, so if you want to solve this problem, you must start from the root system of the orchid. It is suggested that flower friends can put cinders in the soil when maintaining the Junzi orchid, which can have the effect of avoiding its yellow leaves.

In fact, the principle of this solution is very simple, since the poor growth of the orchid is caused by the lack of soil drainage and ventilation, then by improving the soil permeability, it can improve the growth of the root system of the orchid, and prevent its poor growth, yellow leaves and other phenomena.

Due to the full combustion of the flame, the cinder itself has many small pores in the object, and if it is placed inside the pot of the orchid to pad the pot, it can greatly increase the air permeability of the soil, so as to improve the growth environment of the orchid.

Moreover, experimental research data show that cinder not only has superior air permeability, but also contains calcium, iron and other substances that are beneficial to plant growth, which can play a role in promoting the healthy and vigorous growth of Junzi orchid.

1. First select some cinders and put them aside for later use, and then soak them in a container with water for about 48 hours to remove the impurities;

2. Put the cinder in the sun to dry, and then go through it with a sieve to divide the cinder into two parts: larger particles and smaller particles;

3. The larger part of the particles can be used to pad the pot, before the maintenance of the junzi orchid, the larger particles of cinder (diameter of more than 2 cm) evenly spread at the bottom of the pot, the thickness of about 5 cm. After that, you can put the cultivation soil on top. In this way, it can have the effect of increasing the environmental permeability of the soil.

There are some bright spots to note in this process, first of all, the cinder we use here refers to the cinder after the flame has been fully burned, not the original black coal, which needs to be noted.

In addition, before the specific operation, some people will find it troublesome not to soak the cinders, and directly rinse with water, which is very undesirable. Because cinders have been industrially processed, they inevitably contain chemicals such as sulfur and alkalis, which are difficult to rinse off with water. Therefore, it is best to soak in water for a period of time before using it to achieve a sufficient cleaning effect.

People who often raise flowers may know more about Junzi Orchid, this plant is raised to bloom twice a year, and even if it is not raised well, there will be a phenomenon of pinching arrows. For the newly cultivated Gentleman's Orchid, it is generally raised for about 4 years to grow 14 leaves before flowering, so it is very important to raise it well in the first few years of flowering. Especially now that it is spring, it is necessary to repot the orchid in a timely manner.

Next, let me tell you a little trick, adding a little briquette slag to the bottom of the pot of the junzi orchid when changing the pot can help it grow better!

Briquette slag can be used to raise flowers and succulents.

As we all know, the root system of the orchid is more developed and longer, so the pot is suitable for choosing a deeper one, and the problem that must be paid attention to in the deep pot is that the drainage must be good, and the configuration of the potting soil is more important. At the bottom of the deep barrel pot, it is necessary to ensure the ventilation and drainage of the root system of the Gentleman's Orchid, so it is necessary to use a loose medium with good air permeability and good drainage ability. Of course, cinder can also be used.

Briquette slag screening tool for flower friends.

When briquette slag is used, due to its relatively large particles, it is recommended that flower friends learn from the flower friend above and use a sieve to sieve out the fine particles for later use. When padding the potting soil of the junzi orchid, the thickness can be mastered at about 5 cm, not too thick.

There is also a lot of knowledge in changing the pot of the Junzi Orchid, and if it is changed well, it is conducive to recovery, and if it is not changed well, there will be problems such as yellow leaves or even no flowering. For example, when changing the pot of the orchid, first check whether the root system of the orchid is rotten and complete, if there is rot, it is recommended to use scissors to subtract the bad part, and wash the roots with water.

Flower friends candy is very sweet gentleman's orchid washing roots.

After cleaning the roots of the orchid, it is cultivated according to the normal production steps. In addition to adding a small amount of briquette slag at the bottom of the orchid, you can also apply a small amount of bone meal as base fertilizer, after changing the pot, you can spray some water on the orchid plant, be careful not to water immediately, it is best to water once after a day or two, and then you can maintain it normally.

Put it under the flower pot, orchids and junzi orchids will not rot their roots for 10 years, and dozens of flowers will bloom every year!

Many flower friends like to raise orchids and junzi orchids, which not only have high ornamental value, but also can purify the air, but they are the most pretentious flowers. After searching for information, I found that as long as you put it under the flower pot, orchids and junzi orchids will not rot their roots for 10 years, and dozens of flowers will bloom every year, let's take a look!

Flower friends all know that the root system is the channel for plants to obtain nutrients, and no root system can not survive, so if you want to raise flowers well, you must first raise roots.

In the daily maintenance work, one of the most done work when watering, you must know that rotten roots are caused by stagnant water, so what we have to do is to solve the problem of stagnant water, and charcoal is the magic weapon to prevent rotten roots, we only need to put charcoal at the bottom of the pot, we can solve this matter very well, even the most easy to rot the roots of the orchid, the gentleman's orchid will not rot the roots anymore!

Because on the surface of charcoal, there are quite abundant small holes, which can store a lot of water, and charcoal also has good water absorption and drainage, which increases the permeability and air permeability of the potting soil, and solves the problem of water accumulation to a large extent, so in the process of raising flowers, charcoal is an absolutely good material.

At the same time, charcoal is rich in phosphorus and potassium elements, which is very good for the growth of plants, and charcoal can store water very well, when the potting soil lacks water, the water of charcoal can also be naturally returned to the potting soil, even if it is not watered, it can also make the gentleman's orchid and orchid grow very vigorously.

Raising Junzi Orchid, 1 kind of white "little thing" pads the bottom of the pot, raises roots and strong roots, and grows well.

1.To maintain the orchid, use a pot with good ventilation and drainage, such as a mud pot, because it is a fleshy rhizome, and if it is not breathable, it will limit the growth of the root system.

2.It is more afraid of a watery environment, so it is best to have a drainage hole at the bottom of the pot to avoid water drainage and affect the growth of plants.

3.The size of the pot should also be chosen well, and the chosen pot should be larger than the plant itself, so that it has enough space to grow, but not too large.

1. Flower pots are indispensable containers for cultivating Junzi Orchid, and reasonable erection and selection of flower pots is the key to raising Junzi Orchid. The most recommended flower pot for raising Junzi Orchid is the tile pot, which has good drainage ability and good air permeability, which is very suitable for the growth of plants. In addition, it's cheaper and easier to obtain.

When choosing pots, you should choose according to the size of the plant, and do not use too large or too small pots.

2. There are many types of flower pots, from the perspective of the remaining materials for the production of flower pots, there are several kinds of plain pots (commonly known as tile pots), mud pots (purple sand pots), glazed pots, porcelain pots, plastic pots, paper pots, etc. As for the shape of the pot, there are many types with and without the eaves, round, square, and angular.

1. Clay pots: Because plants are more afraid of stagnant water, so when choosing flower pots, you should choose mud pots, which have strong drainage capacity, and mud pots are cheaper and easier to obtain, but mud pots are not too good-looking in appearance, so if you want to put them in a more high-end place, you can use good-looking ceramic flower pots instead.

2. Glazed pots: This kind of flower pot has more patterns, the processing is more fine, and the shape can also be selected according to your preferences.

3. Plastic basins.

The color of the plastic pot is more, ** cheaper than the glaze pot, and the plastic pot is also more convenient to use, generally the flower pot will be designed with drainage holes, which will be more conducive to drainage, but the air permeability of this plastic pot is slightly worse, not suitable for long-term use.

The choice of pot size should be selected according to the size of the plant, the pot is too small will make the root system of the plant all gathered together, which is not conducive to the absorption of plant nutrients, the pot is too large to absorb more water, and the water should not be lost will lead to root rot.