What is the difference between the quality of the sewing agent, and what is the main aspect of the q

The beauty joint, a seemingly insignificant material, affects the final effect of tile paving. Picking a good caulking agent not only increases the aesthetics but also has no pollution, while a bad caulking agent is easy to make the tile gaps black, and it will also breed bacteria, which is not conducive to human health. So how to distinguish the quality of the sewing agent?

The first is to smell. The sewing agent is a new type of environmentally friendly material that is colored and odorless, if you open the sewing agent and smell a pungent smell, then such a sewing agent must be an inferior product, and it must not be used! Not only can it not achieve the effect of sewing, but it will also harm the health of the family.

Be careful not to get too close when smelling, just tap your hand twice.

The second is pulling. When you get the sewing agent, squeeze it out a little and pull it to see how consistent it is, if it forms a filament during the pulling process and does not break, it indicates that its consistency and adhesion are feasible, and the quality is good. The beauty of this kind of sewing agent will not fall off and will not be hollow.

Then there's looking. When the construction of the sewing agent is completed, observe whether the surface is full, whether there are depressions, and the layers are uneven, if these three situations do not appear, it means that the sewing agent is good, otherwise, it is a bad product.

And then there's rubbing. After construction and drying, wipe the sewing agent with waste paper or old cloth at will or smash it on the sewing with a small hammer, if the sewing is intact, it means that the hardness of the sewing agent is high and the quality of the sewing agent is good. Or without tools, press down directly with your fingernails to test the hardness of the sewing agent and distinguish between good and bad.

Finally, there is the ability to resist water. The gaps that have been sewing agent will form a protective film, which has a certain waterproof ability under normal circumstances, so we can also pour water on the sewing to see if the water will penetrate into the seams. If not, it means that the quality of the sewing agent is good, so that the sewage will not be able to penetrate, which will affect the beauty of the joint.

For sewing agents. In the crevices, the color is very beautiful, and. It won't fall off, and such a beauty sewing agent is very good.

The quality of <> beauty sewing agent mainly lies in the five aspects of hiding power, hardness, odor, consistency and color gloss. After drying, the surface of the sewing agent should be plump and flat, and there should be no obvious shrinkage. In terms of hardness, the cured seam should be about the same hardness as ceramic tiles and resistant to scrubbing.

In addition, the smaller the smell of the sewing agent, the more environmentally friendly it is. Creams that are not consistent enough may have some cavities, which will not be easily wiped off if they are of the right consistency. In addition, the gloss should be appropriate, if the gloss is high, it will be unnatural, and the gloss will be low and it will be unsightly.

<> "First, what is the main aspect of the quality of the sewing agent?

The quality of the sewing agent is mainly in the hardness, odor, hiding power, and gloss after construction.

In terms of hardness: if the hardness of the beauty joint agent after construction curing has the same performance as ceramic tiles, it is good, and if there are obvious scratches after scrubbing, it is bad.

In terms of smell: there is some smell after the sewing agent is opened, and it will dissipate in a short time after construction, which is good, on the contrary, if the smell does not disperse for a long time, it is also relatively pungent, it is an inferior product, and it is not recommended to use.

In terms of hiding power: after curing, the sewing agent is smooth and uniform, which is good, and if there is obvious shrinkage, it is bad.

In terms of glossiness: the gloss of the sewing agent after curing, without the gray visual effect, is of high quality, and the gloss is low and unsightly, it is poor.

Second, what should be paid attention to in the construction of beauty sewing agent.

Before the construction of the joint agent, we should pay attention to cleaning the gaps, that is, to clean out some dust and particles in the tile gaps, if there is water and mud blocks, but also use a cleaning knife to remove the dust, and finally use a vacuum cleaner to remove the dust to ensure that it is clean and dry before construction.

If the reserved gap is deep, you can use caulk to pad the bottom first to ensure that the bottom is filled, so that the effect will be better if you apply the sewing agent.

During the construction, the sewing agent should be constructed with a glue gun, and the strength should be uniform, and the speed should be consistent, so that the sewing agent after construction can be full and unified. After construction, the overflowing grout on the tile should be cleaned up in time to avoid more difficult treatment after drying.