In daily life, what material is better to buy for household tiles Do you know?

Personally, I think mosaic.

The material of the tile is better. Ceramic tile is a commonly used decorative material in home decoration, it can be used not only to decorate the floor, but also to decorate the wall. There are many kinds of tiles, different types of materials are different, we should choose according to the situation when choosing, let's see what kind of material is better!

1.All-over bricks.

The so-called full-body brick refers to the fact that in the distribution process, the powder distributed on the spare pressure table of the press is the same powder, and the firing tile has the same color from the bottom to the surface.

2.glazed tiles.

Glazed bricks are bricks whose surfaces have been glazed. The surface of glazed tiles can make a wide variety of patterns, richer in colors and patterns than polished. Because the surface is glazed, the abrasion resistance is not as good as polishing.

3.Polished tiles.

Polished brick is a kind of bright brick made by grinding the entire surface of the brick, which is a kind of integral brick. The surface of a polished tile is much smoother as compared to a whole brick. Polished tiles are hard and hard-wearing, making them suitable for most indoor spaces except bathrooms and kitchens.

4.Vitrified tiles.

Vitrified tile is a type of reinforced polished tile. It burns at high temperatures. It has a harder texture and is more wear-resistant than polished tiles. Undoubtedly, it's also relatively high. Vitrified tiles are mainly used as floor tiles.

5.Mosaic bricks. The volume of mosaic is comparatively smaller among the various tiles and is often referred to as a block brick.

Mosaics give a nostalgic feel. It was the material that decorated walls and floors in the 90s of the 20th century. For room surfaces or corner locations, glass mosaics can make the most of their small shape, covering curved bread smoothly and completely.

When buying tiles, the characteristics of different spaces must be considered, for example, the tiles in the living room must be non-slip and wear-resistant, and the tiles in the bathroom must consider the anti-slip and anti-fouling effect, so as to ensure the safety of the family while being beautiful, and at the same time, the mosaic material of the tile is not very expensive, and many families are acceptable.

To sum up, it is better to choose a tile made of mosaic material, which is more suitable from the material or **.

You know, in daily life, you can buy ceramics or buy polished tiles, ceramics are particularly good, and the hardness is also very high, especially wear-resistant.

I think it would be better to buy all-over tiles. Because the stain resistance of the whole body tile is very good, and it will not leak, it is also very convenient to clean it again, the hardness is particularly large, and it is relatively smooth, which can make the home look more good-looking, and can also make the home brighter. **It will also be cheaper, more suitable for the average person, and quite affordable.

You know, you can choose glazed tiles, you can choose full-body tiles, choose matte tiles, there are many types of tiles, choose according to the actual situation.

It is better to buy polished tile material, so that it will not fall, and it is particularly easy to clean and cheaper.

It's not particularly clear, you must choose according to your own needs, different materials, the quality is not the same, ** is also different, it is best to buy glazed.

Household tiles are divided into a variety of materials, and the following is a reference to several materials with superior performance:

1.Rock slab: light weight, thin thickness, large specifications, 900x2600mm, 1800x3600mm and other sizes, after paving can be done seamless collage, on the wall, under the ground, suitable for all spaces.

2.Glazed bricks: that is, bricks with glazed surface treatment, rich colors, no pores on the surface, and strong stain resistance, suitable for kitchens, bathrooms, balconies and other spaces.

3.Polished bricks: that is, the bricks made by grinding and polishing, the bricks are thin, lightweight, hard and wear-resistant, and the scope of application can be used in most indoor spaces except for bathrooms and kitchens.

<>1. Choose glazed tiles, polished tiles and full-body tiles.

2. Glazed tiles are not easy to crack, because their stability is very strong, the pattern of this tile is particularly rich and can also serve the needs of pure appearance state infiltration, and its water absorption is stronger than other types of tiles, and the application range is wider.

3. Polished tile is a kind of ceramic tile with the most used rate, polished tile has right angles and corners, and its wear resistance is very high, far more than twice the international standard.

4. The hardness of the whole brick is very strong, which can be compared with the stone, and the wear resistance is also very strong, which is made by pressing the old high-pressure traces.

<>1. a glazed brick; Glazed bricks are made by conventional firing practices, and their surfaces are glazed with a layer of treatment, so the surface of this kind of bricks is relatively smooth. The traditional process is adopted when firing, so the basic material is clay; Although the material of this floor tile is not hard, its smooth surface makes the effect flawless and smooth at the same time.

2. a whole-body brick; The whole body brick is an upgraded version of the glazed brick, both of which adopt a unified firing method, and there is a glazed practice on both sides, which can not only reflect the wear-resistant characteristics, but also have a good anti-slip coefficient. Even so, this type of floor tile still has flaws; Because the color of this tile is relatively small, it is more limited in the matching of decoration style, and it can play a role in some public places.

3. polishing tiles; Polished tile is perhaps the most efficient one used in many styles of ceramic tiles, this kind of brick is also made of clay combined with various components, the material is relatively outstanding, and after the tile is fired into shape, it has undergone surface grinding and polishing treatment, and finally presents a bright surface. The water absorption rate of polished tiles is generally low, but the hardness is relatively high. It can be used in the living room or dining room, on the balcony or in the bathroom.

There are a little fewer options in color, but there are a variety of sizes to choose from.