What to do if your finger is stuck with 502 glue

Wash the dish soap a few times, wipe it dry, and slowly tear it off after a while. It's going to drop automatically after the time passes. Feel relieved!

Apply some toothpaste first, relieve the pain, and when the pain is gone, you can remove it after washing some clothes.

Wash with organic solvents such as alcohol.

1. Drop 502 in place to melt the original 502, and then quickly wash it off with water, which is very smart!

2. With insulating oil, pour the insulating oil in the transformer on the table, and the 502 glue will quickly become soft and can be rubbed off quickly.

3. Acetone solution can be washed.

502 glue is a kind of resin glue, as long as you use an organic solvent that dissolves the resin, such as acetone. However, acetone is toxic if inhaled, so pay attention to how to use it, and you can stuff the adhesive part into the bottle. It is said that if you freeze it in the refrigerator, the glue will fall off, so you can try it first.

Stick 502 glue on a small area, just soak it in hot water, if a large area is stained with 502 glue, apply acetone, and wait about 5 to 10 minutes to remove.

If it's okay, just pick it with your hand, and it won't take long to be gone.

It doesn't matter, it doesn't affect it, the laundry is gone.

Tip 1: Soak in warm water.

You see that the two fingers have been firmly stuck with 502 glue, we only need to prepare a bowl of warm water, put the sticky fingers in it and soak it for a while, and then rub the two fingers back and forth a little harder, only need to rub for a while The fingers will be easily separated.

Trick 2: Drip Wind Oil.

We only need to prepare a bottle of wind oil essence, drop the wind oil essence on the finger glue, and then gently rub it a few times, and it is very easy to separate the fingers. Both of these methods are easy to do at home, simple and practical.

If your fingers are stuck with 502 glue, you can soak them in hot water for a while, and when your hands become soft, then slowly remove the glue.

The fingers are stuck with 502 glue and can be soaked in hot water for a while to get them apart.

After the 502 glue sticks to the fingers, you can use alcohol and gasoline, and you can use that if you have it on hand.

You can soak it with hot water + soap and then pick it off.

My finger is stuck with 502 glue, what should I do? Teach you a trick and solve it easily.

Method 1: Drop 502 on the original place to melt the original 502, and the cured 502 glue will slowly soften, and then quickly wash it off with water.

Method 2: Use the cover to pour some insulating oil in the transformer, and then apply it to the glue part, the cured 502 glue will soon become soft, and then you can rub it off.

Method 3: This method must grasp the timing, that is, it must be used when the glue is not completely dry to be effective. When the glue is just dripping on your hands, quickly put your hands in cold water and soak for a few minutes, at which point you can see that the glue has become a solid, and then buckle the glue off your hands.

Method 4: 502 glue can bond harder objects well, but some of the more flexible ones often have no long-term effect. Therefore, when your two fingers are glued together, rub the glue between the two fingers vigorously, just click on it, mainly to loosen the dry glue.

Method 5: Bring a basin of hot water, stick it to the 502 glue you want to remove with a wet hot towel, and the cured 502 glue will become soft after ten minutes. Or soak in tolerable hot water for a while and allow the glue to soften.

Method 6: 502 glue is a kind of resin glue, as long as you use an organic solvent that dissolves the resin, such as acetone. But acetone is toxic, so don't use it lightly.

Method 7: Use 771 adhesive decombinant for cleaning, which is environmentally friendly, does not hurt hands and materials.

After a while, the dead skin will be replaced with a new one, and it will be fine.

You can soak it in hot water, slowly try to separate your fingers, and the layer of solidified 502 on the surface will fall off after a long time.

502 glue sticks to your hands without worry, try this good method.

Use the hardness of the glue: 502 glue is very hard after drying, this feature is an advantage and a disadvantage, the advantage is that it can be a good glue to harder objects, but some of the greater flexibility often has no long-term effect, that is to say, the bonding is very good at the beginning, and the glue will be opened after a period of time. Take advantage of this feature, when your two fingers are glued together, rub the glue between the two fingers vigorously, the method of kneading is actually very casual, mainly to make the glue loose.

After rubbing for a while, try to see if you can separate the two fingers, if not, continue to rub and the problem can be solved within half an hour.

Blister: This method is relatively simple, that is, when the glue has just dripped on your hand and has not dried, quickly put your finger into the cold water, soak it for a few minutes, you can see that the glue has become a solid, and you can easily buckle the glue off your hand. If the glue is already dry on your hands, then you will have no effect if you use water again, so the timing must be good.

Natural shedding method: If your hand is stuck to a piece of paper or other small things, don't worry, if this does not hinder your daily life, you let the glue stay in your hand for a day, generally within two days can automatically fall off, this method is to wait, don't be anxious.

Dissolution method: In fact, there is no one that can completely dissolve 502, and it can only be softened slightly, such as insulating oil, which can be softened and quickly rubbed off after softening. Some people say that acetone is highly toxic, so don't use it lightly.

If you don't have insulating oil, you can also have gasoline or not, but if you can't do it, you can only try it with cooking oil (I haven't tested it, I don't know if it works).

Just take some acetone and dissolve it.

The white hair floats in the green water, and the red anthurium plucks the clear waves.

If it's just stuck to one finger, wait for the glue to dry, and slowly rub it off.

My finger is stuck with 502 glue, what should I do? Teach you a trick and solve it easily.

Generally, hot water bubbles are about the same, and if 502 sticks, don't tear it off immediately, it will tear off the skin.

What should I do if my hand is stuck with 502 glue? Don't worry, just drop a drop to easily remove the glue marks.