Does the bathroom need to be redecorated because the slope is not enough and the water is always acc

Because the slope of the bathroom is not enough, it is always waterlogged, and it needs to be redecorated again, and it should be noted when reinstalling: if the slope is indeed insufficient, and other ways basically do not have a particularly good effect, when taking a bath, the bathroom water storage or more serious, then the best way is to redo the road slope, which is more laborious and burns money, and the floor tiles must be broken and re-done to find the slope of moisture-proof, and then paste the wall tiles. If the bathroom at home always stores water, worry that the water in the bathroom will flow back into the large living room, so you can add a water retaining strip on the threshold stone of the entrance hall and bathroom, so that the relative height of the water retaining strip can be improved, and the bathroom water can also be placed to flow to the large living room.

If you want to deal with it stronger, dry and wet partitions are a better way, you can make a dry and wet partition in the shower area, take a shower in this place when you take a bath, install an odor-proof floor drain in the shower area, and then use a glass partition wall to separate the shower area to cover the dry and wet partitions, and you can also reduce the toilet shower water left in other places is not very good for drainage. This is also a last resort, if the bathroom does not have any slope, the drainage is very slow, basically every time the shower will store more water, that is a very practical way, to make a gap around the wall, you can use an automatic cutting machine along the edge of the floor tile to carry out laser cutting, leak out the gap, so that the water can flow here, and then flow into the odor-proof floor drain.

The edges, whether they are wall footings or door frames, should be painted in a timely manner. In the case of such edge use, it may be damaged due to wall deformation or floor collapse. Therefore, when brushing the waterproofing paint on the edges, it is necessary to brush multiple layers - after the basic floor waterproofing is done, it is necessary to brush one or two more layers with waterproofing paint in this area.

The big problem of waterproofing the pipeline and bathroom is here. There are many pipes on the ground, and the pipes are oval, which makes it difficult to waterproof the ground on the edge. For the vertical pipe of the raised road surface, we can ensure the surface of the pipe by waterproofing the ground to ensure the moisture-proof effect between the pipe and the floor.

For pipes parallel to the road surface, such as floor drain pipes, only a little waterproof paint is applied to the perimeter of the pipe. At the gate, it is important to pay attention to 2 areas. The first is that the ground of the road surface at the entrance is waterproof, and it is necessary to ensure that the door of the bathroom goes - at least the road surface in the door leaf must be brushed enough to prevent moisture.

The second is the doorway stone at the gate, and the ground waterproofing should be turned over on the part of the doorway stone, and the side of the doorstone should be brushed out. This is done to prevent the concrete under the floor tiles from absorbing moisture, and then migrate the moisture to the bathroom door, causing the wall at the door to be destroyed.

If you need to redecorate, it is best to conduct a slope test before tiling and find a professional decorator, so as to avoid stepping on the pit.

This one needs to be renovated. When redecorating, you need to increase the slope, and you also need to pay attention to the waterproofing work.

If there is a problem with the slope of the bathroom, and there is often water accumulation, it will be better to try to redecorate, and you must pay attention to setting a reasonable slope when redecorating.

We now decorate our homes in the bathroom, and because we have bathing requirements, we often use a slightly inclined slope to allow the water to flow out of the drain with a lower place. But many times this slope is not enough, and the water is left in our bathroom, resulting in water accumulation, which can be said to have a great impact on our bathroom environment. Especially if the water is carried to the outside, which causes the environment of the home to be dirty, then how to remedy this situation, how to solve this problem today, and talk to you in detail.

We want to divide the slope into two situations, one situation may be that the water in the bathroom does not flow out, but only the water flows slowly, in this case it is relatively simple to remedy, we can make a small partition in the bathroom, so that the shower is a separate space. At this time, the water can flow within this range, and the speed of drainage will be significantly accelerated. We can also appropriately increase the water retaining strip to let the water flow in one direction, so that the speed of drainage will also increase, which will not affect the normal use of our bathroom.

In the other case, our slope is seriously unreasonable, or even close to flat. It is more difficult to remedy such a situation, and can only use a relatively stupid method, every time there is stagnant water, use a kind of water sweeper, manually sweep the water by yourself, and flow in one direction to ensure that the water can flow out effectively, avoiding too much water to cause the overall environment. If we are really troubled, we generally still have to contact the renovation team, and it is best to be able to rearrange our bathroom floor and decorate it at the same time.

To sum up, the lack of slope in the bathroom will indeed affect our actual use experience, but we must also remember that having a slope does not mean that the slope is too large, if the slope is too large, it will affect our actual use. It is necessary to have a reasonable layout to facilitate the actual use of our toilets, so that we can effectively deal with the problem of stagnant water.

Pry the bathroom tiles open, re-pave the floor, and make the floor a certain slope.

I think it is possible to keep the original floor tiles, then use cement to build the slope, and finally lay another layer of floor tiles, so that you can save the time of smashing the ground and redoing it.

I think the best thing to do is to knock it out and redo it, because the angle can't be changed after laying the floor tiles, so you have to redo it.

Refill the cement and adjust the slope. Long-term water accumulation in the toilet will lead to a large increase in bacteria in the bathroom, which is harmful to human health.

The most cost-effective way is, of course, to use a broom or mop to sweep the water directly to the floor drain, which is easy to cause the bathroom to be in a humid environment for a long time, easy to breed bacteria, and endanger human health.