Circuits often trip after water accumulates in the bathroom

This situation is very dangerous, often tripping after water accumulation, indicating that there is a leakage phenomenon in the place of water accumulation, then the circuit should be changed, avoid the place of water accumulation, and at the same time to transform the place of water accumulation, to avoid the phenomenon of water accumulation, otherwise once the leakage is severely punished, it is a big deal to be injured.

The circuit often trips to prove that there is a bare leaking wire, and the contact is poor, so it is best to find a worker to find a solution, otherwise it is quite dangerous.

The water in the bathroom often trips because there is a damaged place under the floor tile of the wire pipe and the waterproofing is not done well, which leads to tripping.

If the circuit often trips after the toilet is flooded, it is also necessary to find a professional plumber to overhaul it, and if the water vapor is relatively large, it is recommended to install an exhaust fan.

Exhaust the air and it will improve a bit as well.

Toilet is a combination of toilet, toilet, and bath. Residential bathrooms are generally divided into dedicated and communal. The dedicated one serves only the master bedroom; The common ones are connected to the public walkways and are shared by other family members and guests.

According to the layout, it can be divided into three types: independent, dual-purpose and eclectic. According to the form, it can be divided into semi-open, open and closed. At present, it is more popular to distinguish between dry and wet partitions.

The layout of the residential bathroom space has a lot to do with the climate, economic conditions, culture, living habits, family composition, equipment size and form. Therefore, there are various forms of layout, such as organizing several pieces of sanitary equipment in one space, and some are separated into several small spaces. It can be divided into three forms: dual-use, stand-alone, and eclectic.

After the toilet is flooded, the circuit often trips may be due to the humid environment, and the line automatically trips for protection. For personal safety, it is recommended that you find a professional master to check and repair as soon as possible.

Be careful where there is leakage.

Summary. Dear, hello, I'm happy to answer for you, what to do if the bathroom always tripsAnswer: The bathroom always trips may be a problem with the toilet socket line, three situations, one is not enough load; Second, the zero line of the toilet socket line is shared with the lighting, which will cause current imbalance and trip; The third is that the toilet socket line is used together with other lines.

1. You judge the water heater in the right way. Similarly, if there is a suspicion that there is a fault in other electrical appliances themselves, you can disconnect this electrical appliance and connect it to another place, and if the fault disappears, you can conclude that the trip is the fault of this electrical appliance. 2. If there is no problem with all the electrical appliances in the bathroom after inspection, it can be determined that the power supply line has been short-circuited.

3. It is necessary to check from the gate box in sections. But the condition is when the failure occurs. If the fault comes and goes, it is not easy to check.

4. It is recommended that you disconnect the bathroom from the gate box and use the temporary power supply line to supply power. After using it for a period of time, if the fault disappears, it means that there is a problem with the power supply line of the bathroom. You can ask a professional electrician to replace the dark wires in the bathroom.

5. If the dark wire cannot be replaced, you need to ask a professional electrician to arrange the open wire indoors.

What to do if the bathroom keeps tripping.

Hello. In no.

Dear, hello, I'm happy to answer for you, what to do if the bathroom always tripsAnswer: The bathroom always trips may be a problem with the toilet socket line, three situations, one is not enough load; Second, the zero line of the toilet socket line is shared with the lighting, which will cause current imbalance and trip; The third is that the toilet socket line is used together with other lines. 1. You judge the water heater in the right way.

Similarly, if there is a suspicion that there is a fault in other electrical appliances themselves, you can disconnect this electrical appliance and connect it to another place, and if the fault disappears, you can conclude that the trip is the fault of this electrical appliance. 2. If there is no problem with all the electrical appliances in the bathroom after inspection, it can be determined that the power supply line has been short-circuited. 3. It is necessary to check from the gate box in sections.

But the condition is when the failure occurs. If the fault comes and goes, it is not easy to check. 4. It is recommended that you disconnect the bathroom from the gate box and use the temporary power supply line to supply power.

After using it for a period of time, if the fault disappears, it means that there is a problem with the power supply line of the bathroom. You can ask a professional electrician to replace the dark wires in the bathroom. 5. If the dark wire cannot be replaced, you need to ask a professional electrician to arrange the open wire indoors.

Recently, some netizens asked for help through private messages, saying that the leakage protector in the bathroom at home always tripped. What are the reasons for the tripping of electric shock protectors? Below, I will share with you some relevant safety knowledge of sanitary rolling sections, I hope it will be helpful to you.

Reason 1: Electrical appliances or lines leakage and short circuit. When it is found that the electrical appliances used are leaking, as long as you unplug the electrical appliances with leakage faults, and then close the low-voltage circuit breaker again, you can send electricity.

After the low-voltage circuit breaker jumps open, first disconnect all the branches, and then close the power transmission one by one. When a certain circuit is closed, the low-voltage circuit breaker cannot be powered, that is, the shunt is faulty, and this road should be disconnected and other shunts should be closed for power transmission. After the problem of faulty shunting is detected, the power is sent after repair.

Reason 2: Poor installation of leakage protector in the bathroom. If the lead wire of each pile head is not firmly connected and loosened for a long time, it will cause the pile to heat and oxidize, burn out the outer insulation of the wire, and emit sparks and burnt smell, resulting in undervoltage of the line and air switch action.

Cause 3: The load does not match. The actual electrical load of the household is greater than the rated current of the low-voltage circuit breaker on the line. It generally occurs after the new installation or new use of high-power household appliances such as air conditioners and electric water heaters. The matching air switch must be replaced.

Reason 4: The voltage of the incoming line of the electric combustion source is too high. This is very dangerous and generally occurs in residential hugs with "three-phase four-wire" power supply.

At this time, see if both wires are electrified; Second, see if the left and right neighbors also trip; Three, use a multimeter to measure the incoming line voltage. Do not forcibly close the low-voltage circuit breaker, otherwise it will burn out the electrical appliances at least and cause a fire at worst.

In order to save money, some rental landlords use the cheapest single-core wire (hard wire) for the wires at home, because the contact area between this wire and the socket panel is small, it will cause the socket to be burned out often or the meter to trip, which will cause the risk of disaster in serious cases.

In this case, you should consider whether the water heater is empty and tripping due to overload, and you can try to change it to a larger switch.

It may be that there is a problem with the toilet socket line, three situations, one is that the load is not enough; Second, the zero line of the toilet socket line is shared with the lighting, which will cause current imbalance and trip; The third is that the toilet socket line is used together with other lines. Get a professional electrician to check it out.

Little brother, your air opening is broken, there is a leakage protector on the air opening, if it is leakage, it will pop up, and if it does not pop up, it will not trip if it does not pop up, but there is something in the sensitivity of the air opening.

Then it's obvious that there is a problem with the water heater in the toilet.

There are several possibilities: Measure whether the socket is connected to the reverse or not, open the panel to see if the copper wire screws are tightened, and whether the socket is inlet with water vapor.

Check whether the ground wire is live and replace the panel to see if it really can't change a large ampere empty opening.