How to mop the floor can be the cleanest, how to mop the cleanest

Method 1: Make your own cleaning solution. Add an appropriate amount of dish soap, salt, baking soda and fabric softener to the water, mix well, then put the mop into the cleaning solution to wash, and then wring out the mop and mop the floor as usual.

Dish soap and baking soda are used to dissolve stains, salt is used to disinfect and sterilize, and fabric softener forms a protective film on the surface of the floor tiles to avoid sticking dust. Method 2: Use soapy water.

Wash the mop in soapy water and wring it out before mopping the floor to make the floor tiles brighter. How to clean and maintain floor tiles 1. Daily cleaning Only by doing the most basic daily cleaning can we effectively extend the service life of tiles and maintain good gloss for a long time. The focus of daily cleaning is to remove dust, if it is a floor tile, you can use a vacuum cleaner to vacuum the dust every day, or use a slightly damp mop to mop the dust off the floor.

If it is a wall tile, wipe it regularly with a damp rag. In addition, it is also necessary to do a major cleaning of the floor regularly, you can make your own cleaning solution or directly use soapy water to remove the remaining stains on the floor and improve the gloss of the floor tiles.

Mop the living room and bedroom with some laundry detergent, drag the kitchen with dish soap to remove oil, and drag the bathroom with some salt.

Generally, sweep the floor first, then mop the floor, mop the floor twice a day, it must be very clean.

How to mop the floor cleaner without leaving water stains?

1. Alcohol: The use of alcohol to mop the floor can make the ground cleaner, the specific way to use is to add an appropriate amount of alcohol to the water, and then directly soak the mop in the water, which can be used to mop the ground, this method may not only make the ground cleaner and more hygienic, but also play a role in sterilization.

2. Salt for the sliding stool: mopping the floor with salt can also make the ground cleaner, and after each mopping the ground, the ground will often leave some water stains, and it takes a long time to dry. It is recommended to mix some salt with warm water, and then sprinkle the salt water on the ground to make the water on the ground evaporate faster.

3. Softener: For people who do not mop the floor often, you can also add a certain softener to the water in the process of mopping the floor, and stir it slightly. Then soak the mop in water, wring it out slightly and then use it to mop the floor, and after the ground is dried, the ground will not be easy to get dusty, so that the ground can be kept clean for a long time.

First of all, use a wet mop to mop the ground well, and then wring the mop dry, and mop the ground again to make it cleaner.

Sweep the floor with a broom and then wash the floor three times with a mop. Then the floor will be clean.

Procedure: Sweeping, mopping, cleaning, washing, mopping, mopping, dry-mopping. It's clean that way.

Hello! Floor cleaning requires the help of special products to be effectively cleaned.

You can choose our floor cleaner for cleaning, which contains highly effective stain removal ingredients that easily remove a wide range of stains and continuously resist stains.

At the same time, it also has the characteristics of bright and fast drying, rapid sterilization and mild formula; The lemon scent can make the room feel comfortable and fresh.

Different product specifications, different dosages:

600g specification: 1 cap of this product into half a bucket of water (about 5 liters).

2kg size: 1 3 caps into half a bucket of water (about 5 liters).

After mixing with water 160 times, soak it with a mop or rag and mop the floor without watering. For stubborn stains, wipe clean with a cloth dipped in a small amount of the product.

Is it hard to mop the floor? Teach you a small way to mop the floor quickly and cleanly.

1. Soak the mop before mopping, you can add a small amount of salt and a small amount of soda when soaking the mop, and add a small amount of laundry detergent so that the ground spike of mop can also repel mosquitoes in the summer, and it will be relatively clean.

2. You can add a small amount of laundry detergent to the water of the soaked mop, so that the ground dragged out also has a strong decontamination effect, which can not only play a clean effect on the ground mop, but also effectively increase the fragrance of the room.

3. Try to choose about 2-3 times of dragging back when mopping the floor. You can choose to use the habit of mopping the floor quickly for the first time, and then mop slowly for the second time, guessing that the ground will be cleaner in comparison. Many people mop the floor directly, but in fact, this does not play a role in cleaning at all, and sometimes the ground is dirtier.

4. After the ground is mopped, it is recommended to go through the ground again, at this time, you can use a dry mop, which is to absorb the excess water on the ground, which will reduce the stains left on the ground after mopping.

How to mop the floor to mop it clean. In the home, we often need to do housework to help us clean the home, only a clean and tidy home is suitable for people to live in, otherwise it will fall into ashes, and it will be bad for long-term residence, but how to mop the floor to mop it clean?

Wipe the unclean area with salt.

Edible salt has a cleaning effect, if there is oil stains on the floor, we can pour the salt on the oily place, and then use a mop to drag back and forth several times, when the salt and grease touch, it will dissolve, and the natural oil stain will be removed.

How to mop the floor with milk.

In life, we often drink milk, and sometimes there is milk that we can't drink, and we don't lose much of what we don't drink and keep it for mopping the floor. Dry a little milk before mopping the floor, maybe sprinkle a little milk on a dirty place, and mop the floor again after a while, and you can mop it cleanly.

You can also try the soap mopping method.

Soap is also a commonly used cleaning product in our lives, but many of us use it to take a bath and wash clothes. As everyone knows, it is also possible for flooring. We can take a part of the soap and put it in hot water to dissolve, and then use the dissolved water to wet the mop and mop the floor, which not only has a decontamination effect, but also has a faint fragrance in the house.

Washing rice water is also a good helper for mopping the floor.

Rice water is a very common thing in our lives, and every household has it. But many people may not know that the water we usually use to wash rice can actually be used as a detergent. When mopping the floor, you can directly wet the mop with rice washing water, and then mop the floor, which can not only remove floor stains but also remove static electricity.

You can also add dish soap and an appropriate amount of toilet water to the mopping water, so that you can mop it over. The floors are cleaner and brighter, and they can be scented.

We can also add some fabric softener that will be used in laundry to the water for mopping, mopping the floor with fabric softener is faster and more translucent, and it can also reduce the generation of static electricity and make the floor less prone to dust.

Start by putting the mop in the water and let the mop absorb the water sufficiently. I get the water out of the mop and keep it moist. Wet mopping is mopping with moisture.

Then mop the floor, don't push too hard, you can push and retract, so that you can ensure that the mopping is even, not empty.

After a few mops, just put it in the bucket to get the dirty water out of the mop, and then make it as wet as the first time. It's also a push and a retraction. If the water is too dirty, you need to change the bucket of water.

Once you've mopped, you'll notice that the floor is wet. Next is the dry mop, mop with a sponge mop. Because the sponge mop can absorb water quickly in large quantities. Achieve the effect of quick drying of the floor.

After dragging the sponge a few times to completely absorb the water, it is dehydrated, and the water is removed into the bucket to absorb water on the floor.

When you're done, you'll find that the floor is clean and not wet.