-
Anonymous users2024-02-131. Vitrified bricks. Vitrified brick is a relatively good ground tile material, the surface of this brick is a bright brick made by grinding, with the texture of natural stone, strong hardness, good wear resistance, low water absorption and other advantages, with this tile paving decorative effect is very good, can be classical and modern inclusive.
2. Polished tiles. Polished bricks are hard and wear-resistant, more suitable for indoor spaces other than toilets and kitchens, and polished bricks can make a variety of imitation stone and imitation wood effects, but polished tiles will leave concave and convex pores when polishing, and these pores will hide dirt and dirt, and even some tea poured on the polished tiles will be powerless.
3. Mosaic. Mosaic floor tiles give people a sense of nostalgia, and for the curved surface or corner of the room, the mosaic can play a small body specialty, and can cover the arc bread smoothly and completely. Mosaics are generally divided into ceramic mosaics, glass mosaics, molten glass mosaics, etc.
4. Glazed tiles. The surface of the glazed brick is a brick that has been glazed by burning, which can be made into various patterns and patterns, with rich color patterns, many specifications, and easy to clean, suitable for places such as kitchens and bathrooms. Although the wear resistance of glazed bricks is slightly worse than that of vitrified tiles, the wear resistance of qualified products can definitely meet the needs of home use.
-
Anonymous users2024-02-12In 2010, China's top ten ceramic brands ranked: Marco Polo, Nobel, Dongpeng floor tiles, Bikara ceramics, Jiajun ceramics, Lihua ceramics, Tianbi, Smic, Qianghui floor tiles, Xinzhongyuan.
Suggested selection method:
1. Look. It is mainly to see whether there are black spots, bubbles, pinholes, cracks, scratches, color spots, missing edges, missing corners of vitrified tiles on the surface of the tile, and pay attention to whether there are defects such as leakage and grinding and grinding. Check the trademark mark of the base embryo, the product produced by the regular manufacturer has a clear product trademark mark on the bottom embryo, if there is no or particularly vague, it is recommended to choose carefully!
Second, the check. It is to weigh the weight, try the feel of the tile, the same specification of the product, ***, the feel of the brick with high density is relatively heavy, on the contrary, the quality of the product feels lighter.
3. Listen. By tapping the tiles, by listening to the sound to identify the quality of the tiles, the following according to the kitchen and bathroom wall floor tiles and vitrified tiles two aspects to introduce:
Tapping method: 1) Wall tiles or small size tiles.
Generally, it is separated by five fingers of one hand, dragging up the tile, and the other hand tapping the face of the tile, if the sound is metallic, the quality of the tile is better.
2) Large floor tiles (vitrified bricks or antique bricks are used on the floor such as the living room).
Lift one side of the tile with one hand, hit the middle of the tile with the upper part of the palm of the other hand, if the sound is thick and the echo is long like the sound of striking the copper bell, the porcelain degree of the tile is higher, the wear resistance is strong, the flexural strength is high, the water absorption rate is low, it is not easy to be polluted, if the sound is turbid, there is no echo, the degree of porcelain is low (and even cracks), the embryo body of the tile is not calcined sufficiently, the wear resistance is poor, the flexural strength is low, the water absorption rate will be higher, and such vitrified bricks are very susceptible to pollution.
Fourth, fight. Take out 4 pieces of products of the same specification and model at will, and assemble them, and through this step, you can check the size of the tile, flatness, straight angle and other three aspects.
5. Try. As long as it is aimed at the anti-slip problem of floor tiles.
-
Anonymous users2024-02-11The floor tiles are very good with normal cement floors, or it is very good to lay the floor tiles after you do a good job of self-leveling, anyway, the floor tiles do not have very high requirements for the ground, and they are OK.
First, look at the color, observe whether the color of the brick surface is uniform, the surface finish and integrity, etc.; >>>More
The difference is that a good floor tile must be able to be used for a long time, ** it is also more expensive, and it generally does not crack, but the performance of ordinary floor tiles is not very good, so there are often scratches.
The varieties of floor tiles include full-body bricks, glazed tiles, full-body polished tiles, infiltrated tiles, infiltrated polished tiles, etc. When it comes to the color matching of floor tiles, it is still determined according to the decoration style of the home. There are also house types to design. >>>More
If you want your home to be modern and minimalist, you can use grey, white and light colours, or a combination of them, these cool shades can highlight the softness of the room and contrast with the dark furniture. White can also give a sense of spatial expansion. In fact, light-colored floor tiles are suitable for all living rooms, and can be just cool or warm. >>>More
Causes of heating of floor tiles.
1. If the marble that is heated is the ground, the wires buried in the ground are damaged, and the local resistance value is too large, resulting in tropical electricity on the marble floor; >>>More