Is it better to use tile glue or cement grout for tiles in the house

As we all know, cement mortar is generally used for tiling, but in recent years, there have been more tile adhesives on the market, and I don't know which one is better to use!

Let's look at the cement mortar first, that is, it is mainly cement, add yellow sand and some waterproof additives, and then stir with water, which is basically zero pollution, high adhesion, and preferential treatment.

But the bad thing is that cement mortar is affected by many external factors and is easy to fall off. In addition, the hardness of tiles on the market is getting higher and higher, and the focus is on poor water absorption, so the tiles often fall off.

From the appearance, tile adhesive and cement are almost the same, mainly mixed with water, and then directly used to paste tiles. However, tile adhesive has an advantage that cement does not have, that is, it is less affected by external factors, and it is resistant to low temperature and water. The bad point may be that it is expensive, and there are many bad tile adhesives on the market, and there may even be the problem of excessive formaldehyde.

Compared with cement and tile adhesive, the adhesive performance of ceramic tile adhesive will be better, the point is that you don't need to run the tile in advance, you can paste it directly. There is no need to paint a thick layer on the wall, and it is basically very firm when pasted on.

Of course, good things are generally expensive, so there is no need to use tile adhesive in all places, you can use it in the kitchen and bathroom, because these places are often wet, and it is easy to fall off with general cement.

Generally in the case of budget or choose professional tile adhesive is better, compared to the cement river sand, tile adhesive is not only stronger adhesion is more than three times that of cement river sand, a tile adhesive as long as a thin layer can be, and cement mortar is the need for a thick layer, tile adhesive no toxic additives can reduce waste, in line with environmental protection characteristics is high bonding strength, water resistance, frost resistance, fusion resistance and aging resistance.

It is strongly recommended to use tile adhesive for pasting ceramic tiles, and the emergence of ceramic tile adhesive is to replace the traditional cement mortar to paste tiles. Tile adhesive solves the shortcomings of traditional cement mortar pasting tiles that are easy to hollow and easy to fall off, and has good durabilityTile adhesive has been popularized in Europe and the United States for decades!

Hello kiss, when sticking floor tiles, it is better to use tile adhesive than cement grout. Here are some of the reasons: Easy to apply:

When using tile adhesive construction, you only need to apply the glue on the ground, and then paste the bricks on it, and you don't need to mix and deploy it like cement slurry, and the operation is simpler, and you can save time and labor with the loss. Fast construction speed: When using tile adhesive for construction, due to the simple construction and faster construction speed, the ground paving work can be quickly completed.

Strong adhesion: tile adhesive has strong adhesion, which can firmly stick the bricks to the ground, and is water-resistant, durable, and not easy to appear hollowing, cracking and other phenomena. The construction effect is good:

After the construction of ceramic tile adhesive, the ground is smooth and beautiful, and there will be no uneven and unsightly situation common in cement slurry construction. In short, when sticking floor tiles, the use of tile adhesive is more common than the use of cement grout, and the use of more square limbs and the effect is more ideal. Of course, the specific choice should be decided according to the actual situation, such as the material of the ground, the area and other factors need to be taken into account.

If it is to pave indoor floor tiles, it is not recommended to use tile adhesive, it is recommended to use cement grout. The reason for this point of view is mainly based on the characteristics of the tile adhesive itself and the characteristics of the floor tile paving.

The use of cement paste tile method is more traditional, the application is more extensive, relatively speaking, the technology of this cement tile is relatively mature, can be used to build walls, floor tiles, etc., the cost is relatively low. The adhesion of cement tiles is also relatively high, it is by mixing with other materials to produce a certain adhesion force to fix the object, and the adhesion is also very high.

If a large amount of tile adhesive is used, it may lead to excessive indoor pollutant release, and the release is relatively slow, which may continue to pollute and outweigh the losses.

It is recommended to use tile adhesive for wall tiles

Cement wall tiles are more complicated to construct, and some steps such as wet walls, soaked bricks, and supports are required. Not only will the construction efficiency be very low, but the effect of sticking out is not very good (easy to appear hollow, falling off, etc.). Tile adhesive can directly omit complex steps, and it is more practical.

Now the quality of ceramic tiles is getting better and better, so even if it is a wall tile, the water absorption is not so high, so the water absorption principle of traditional cement mortar can not meet the current paving, and the tiles are getting bigger and bigger, and the tile adhesive is easier to paste. Moreover, the tile adhesive is not affected by climate and humidity, and the cement mortar is likely to cause the tile to fall off due to thermal expansion and cold contraction.

Hello, I personally think that the cement is better, the cement is generally prefabricated by the factory, adding a large number of party additives, so that the rigidity of the cement has been improved. It is a new type of material with good tiling effect. Cement is cheaper, the effect is not so good, the cement ** is slightly higher, but the performance is good.

It is recommended to use cement mortar, no need to add glue in the normal temperature season of the project, and 108 glue should be added appropriately for winter construction, and the cement mortar can be pasted directly at home. The above refers to the façade paste, from the daily use, the family with a percussion drill drilling is particularly easy to cause tile hollowing, or the temperature difference between the inside and outside of the bathroom and the humidity difference caused by the hollow, if you feel unassured, you can add 108 glue. Because the water absorption rate of polished bricks is very low, and the water absorption rate of the wall is too high, the double-sided water absorption rate of cement mortar can not be consistent, so it is not possible to use cement mortar to paste polished bricks, and tile adhesive has good water retention.