Which paint is more environmentally friendly and what paint is the best and most environmentally fri

Water-based paints bear the brunt.

Many people have limited understanding of water-based paints. Whether the paint is environmentally friendly or not depends on its composition. The best polyester paint on the general market contains toluene, xylene, and a lot of organic volatiles.

The most environmentally friendly paint is now water-based wood paint. Water-based paint uses water as a diluent, there is no smell during construction, and there is no increase in toxic solvents and ingredients in terms of composition, claiming that "drinkable paint" - promoting water-based paint also wants to make a big news, because it is a chemical component, from the perspective of environmental protection characteristics, water-based paint has reached the relevant standards.

Water-based paint is environmentally friendly, but when buying, people also need to see whether its performance is good or not, and whether the decoration is to work. Water-based paints are now truly classified into two types: acrylic and polyurethane. Just as solvent-based paints are divided into alkyd paints, nitro paints, and polyester paints.

Polyurethane water-based paint is now a high-end product on the market, acrylic water-based paint is a transitional product, because acrylic water-based paint is also environmentally friendly, but the paint film adhesion is poor, short life, back stick, solid content is one level lower, and polyurethane water-based paint has a great improvement in these aspects.

It is recommended that water-based lacquer, without contamination, dries quickly.

Paint, when we are decorating our homes, is also a very good decoration material, and its material is relatively environmentally friendly. However, when choosing a brand, we will also take into account its environmental protection, so that we will understand our needs at that time. Let's take a look at it with usWhat paint is the best and most environmentally friendly

This will be of great help when choosing paint.

1. What paint is the best and most environmentally friendly.

1. Dulux, a big brand worthy of our choice, is a brand of AkzoNobel, which is very powerful, but it is used by 50 million households around the world every year, and factories are opened in 26 countries around the world, which produces more than 1.1 billion liters of cavity paint, and the product is sold in 100 countries around the world, and it also occupies a leading position in many countries. At present, the Dulux brand covers: latex paint, wood paint, to meet the needs of different layers of canopy shirts.

2. Du Fang, an environmentally friendly European brand, has no taste, guarantees our use, and the main selling point is that it has low VOC content, and it has strict environmental protection labels. However, it is not enough in terms of color, and it is easy to have large color differences. In addition, the gap between the various grades of the product is not obvious, and there is a large gap, which causes some confusion to consumers.

Dufang is cost-effective, but not low. Then the painting area of Dufang is 35 square meters (twice), if the wall is treated well, so Dufang latex paint is very resistant to brushing.

Second, what are the steps of paint construction.

1. First of all, the wall base treatment will remove the big white putty of the original wall base layer; It is necessary to understand that the cracks of the hollow drum of the wall should be inspected and handled, and the cracks should be filled with gypsum putty, bandages or cloths; If the insulation wall is treated with cloth, the cloth must intersect. The wall is closed with Huibang interface agent, the purpose of which is to enhance the adhesion between the putty and the wall. Gypsum board self-tapping should be treated with anti-rust, board seam interface, bandage or cloth treatment.

2. There is also the need to make up for the negative corners of the putty construction wall to ensure that it is straight (5mm error repair range), and it is necessary to pay attention to the verticality; You can use a ruler to treat the yang angle, and then use gypsum powder and glue to prepare gypsum greasy and burner for straightening. Then use a slightly longer aluminum alloy ruler to check the recessed parts of the top and wall, mark them, and use gypsum putty to scrape the uneven wall, and the uneven difference should not exceed 5mm.

3. Then there is that after the gypsum putty is dry, (it must be thoroughly dried every time), it needs to be understood, and then scrape the water-resistant putty. The wall must be flat, at least two times full of water-resistant putty, if it still does not meet the standard, it should be scraped to meet the standard requirements. There are two ways to test whether the putty is dry:

Avoid dust that will affect the adhesion of the paint.

4. Finally, it is necessary to do a good job of protecting the finished product before the latex paint is painted, and it is also necessary to understand that doors, windows, lamps, furniture, hardware, etc. should be clean and free of paint traces. After the wall plastering is cleaned, you can paint the first wall paint, and the primer must be brushed evenly, and every place must be brushed, and it usually adds a little more water when brushing the primer to ensure that it can be painted evenly. So as not to make the color difference between the paint and other wall surfaces.