What material is better to use when making wardrobe doors? Which materials are more durable and affo

Wardrobe is indispensable for every family, it is convenient for us to store and organize clothes, a good wardrobe needs to see the material, today Shaoxing decoration network for you to introduce the wardrobe door what materials, it is worth considering these materials when choosing, hurry up and take a look! Aluminum alloy wardrobe doors are more common and used more in daily life. This is because it has good environmental performance, is also very durable, and also has a strong sense of fashion.

However, the style is relatively simple, and there are fewer choices for consumers.

<> glass panes, our more common glass wardrobes are mainly made of lacquer. The advantage of this kind of door is that it is possible to make any drawing on it, but due to the limitations of processing, the style is relatively simple. In addition, wardrobe doors made of this material are relatively easy to clean during use, and they are also very affordable.

Check it out! Aluminum alloy wardrobe doors are more common and used more in daily life. This is because it has good environmental performance, is also very durable, and also has a strong sense of fashion.

However, the style is relatively simple, and there are fewer choices for consumers.

Particleboard. Particleboard wardrobe doors are also used more. This kind of door is made under high temperature and high pressure, so it is stable and more durable.

However, it is not easy to distinguish when purchasing, and the amount of glue is relatively large, so it is not very environmentally friendly. Solid wood When it comes to the material of the wardrobe, it is naturally the best solid wood, which avoids the excessive use of adhesives.

It is more healthy and environmentally friendly, with strong load-bearing capacity, safe and stable, and has a long service life, which can reach ordinary plates.

The wardrobe is more than five hundred, which is durable, but the cost of solid wood wardrobes is higher, so most of the boards used in the chest are wardrobes made of market or panel combinations.

Large core board. Large core board is also called blockboard.

It is a good material for wardrobe frames. Large core board is a type of plywood.

with solid wood boards. The core layer is made of strip-shaped splicing, the log is made of the above materials, the surface is smooth and flat and falls off, the stability is strong, not easy to deform, the general components are according to the thickness of the plywood, there are five layers of plywood and nine layers of plywood, the thicker the higher the higher, according to the pressure and strength to undertake the selection.

1. MDF.

MDF is a commonly used wood-based panel, which is made by soaking wood, branches, etc. in water, and then crushing and pressing it. Its density is uniform, the strength is high, and it is relatively easy to process, but the disadvantage is that the moisture resistance is not good.

2. Particleboard.

Particleboard is a kind of man-made board that cuts wood and other raw materials into pieces of a certain specification, dries them, mixes them with adhesives, hardeners, and waterproofing agents, and presses them at a certain temperature. Particleboard has a uniform structure and good processing performance, and can be processed into large-format boards as needed, which is a good material for making furniture of different specifications and styles.

3. Plywood.

Commonly known as multi-layer board, it is a plate-like material formed by turning wood into a veneer or thin board formed by glue under a certain period of temperature and pressure. The common ones are three, five, nine, and twelve. Plywood has common defects such as low glue strength, bubbling and partial glue, and plywood warping, so it is more used to make oil-mixed panels or backboards.

4. Solid wood planks.

The solid wood panels are made from natural trees and are extremely environmentally friendly. Compared with other materials, it is harder and more stable. It also feels good in the hand and can also adjust the temperature and humidity in the room. However, it is relatively much higher, and the production and construction process requirements are higher.

5. a large core board.

Also known as blockboard, it is a good material for wardrobe framing. The large core board is made of a layer of core spliced with strip-shaped logs, and then pasted with thin wood veneer on the outside, the surface is smooth and flat, the stability is strong, not easy to deform, and the pressure and strength are purchased according to the thickness of the board.

6. Ecological board.

The eco-board has the characteristics of high hardness, good wear resistance and heat resistance, and contains multi-layer solid wood, so the nail holding force and stability are strong, and the furniture is not easy to deform and crack. Its surface is smooth and flat, and its color is bright. The eco-board has a strong corrosion resistance effect and has a certain resistance to general corrosive liquids.

Glass panels, aluminum alloys, particle boards, solid wood panels, these materials are easier to use, and more affordable.

Personally, I think it's better to use solid wood; The solid wood composite board is more durable, and it is also very affordable, especially the material of the composite board, which is not only cheap, but also very durable, and has more patterns.

I think it's best to use eco-friendly composite wood panels; More economical materials, including solid wood doors, particle board, painted door panels.

Speaking of wardrobes, everyone must be familiar with it, he is a piece of furniture that we can not do without in our daily life, today I want to introduce to you what kind of board is good for making a wardrobe What are the 5 common plates recommended?

1. Solid wood particle board.

Solid wood particle board is the first of the five common board recommendations for the waist circumference, which seems to be more environmentally friendly, as the name suggests, it seems to be more environmentally friendly, and has a good role in heat insulation and sound absorption, but its disadvantage is that its hardness is not enough, so it is generally not used to make a wardrobe with a larger model.

2. MDF.

The surface of MDF is very smooth and the appearance is relatively beautiful, but it is worth noting that MDF is very poor in waterproofness, so it is not recommended to use MDF in dark and damp rooms.

3. Solid wood multi-layer board.

As the name suggests, solid wood multi-layer board is a board composed of multi-layer solid wood veneer, its strength and stability are relatively good, but the disadvantage is that its environmental protection is relatively poor, easy to cause pollution, and it is easy to harm people.

4. Blockboard.

Blockboard, also known as large core board, is the first choice for most people to decorate their wardrobes, because there are no obvious defects in terms of strength, hardness, aesthetics, environmental protection and waterproofness.

5. Ecological board.

The last one I want to introduce to you is what kind of board to use to make a wardrobe The last one recommended by the common 5 kinds of boards is the ecological board, the ecological board is the best one of all the boards, and its performance in all aspects is better than that of the blockboard, which is also the reason why the ecological board is more popular.

Solid wood is generally considered to be the best, because it contains less formaldehyde and is more durable.

However, due to the decoration budget, most of the boards selected are mostly particle boards, MDF, or Sophia's own called Kangchun board (I don't understand).

The material of the cabinet door and wardrobe cabinet board is the same, and the whole wood is beaten into pellets or fibers are compressed into boards.

However, the difference between the cabinet door and the cabinet plate is the surface, some cabinet doors are painted on the basis of the surface of the cabinet body, some are directly blister molded at one time, some are laminated, some are leather bags and so on.

Therefore, the surface of the cabinet door is usually more beautiful and delicate than the surface of the cabinet, and the selection of plates should be in line with 1Formaldehyde meets the standard. 2.Fit on budget. 3.Process structure.

Formaldehyde logically speaking, as long as there is formaldehyde in glue or paint, the slightly larger home furnishing brands on the market can basically meet environmental protection standards.

The conformity of the budget lies in the balance of the pocket, so I won't talk too much about it here.

The process is the most important problem to consider, more than the natural gap can be seen, the internal is nothing more than particles or fibers, the gap on the surface, I personally think that when cutting, the paint surface bursts teeth (the paint surface is not a line after cutting) The process must be poor, and the edge banding is not a edge banding strip edge banding ** corner has splicing) The process is poor; After cutting, there is a heavier odor that is not suitable for purchase.

Which door is better to choose for wardrobe doors.

1. Blister door.

It is made of MDF as the substrate and covered with blister film. This kind of door is economical, MDF can be carved by machine, and it is a commonly used wardrobe shape decorative door. The quality depends on the quality of the MDF, as well as the quality of the film, the good quality of the film does not fade, does not peel, the texture is good, and the color is positive.

Generally, ** is about 120-200 per square meter, and the ** of the brand is higher, generally around 300-600.

2. a flat door.

Use particle board, multi-layer board or MDF as the substrate, and the surface is made of film blister, or paint-free board finish, or baked paint finish. The surface of the flat door has no shape, only the color and texture of the surface are decorated. **There are high and low, generally made of particle board paint-free process of flat door** economical, ** in about 120-200 per square meter, brand in about 400-600.

3. Glass door.

To make a wardrobe door with tempered glass, you need to customize the size of the cabinet door, and the manufacturer will install it after tempering treatment. The glass has fully transparent clear glass, translucent atomized glass, and craft decorative glass. Ordinary glass** is cheaper, about 200-300 per square meter, and better glass** is about 500-1000 per square meter.

Glass doors are generally used in conjunction with wooden doors, some of which are glass and some of which are wooden. It can also be made as an all-glass wardrobe door. The glass is decorated with reflection and refraction, the chips are crystal clear, and the decorative feel is different from that of wooden doors.

4. Solid wood door.

Cabinet doors made of solid wood slats, or solid wood panels. The surface is treated with paint finish, and the oil cleaning process is generally used to express the natural texture of the wood. Solid wood cabinet doors are relatively high, basically starting at 1,000 yuan per square meter, the brand should reach 2-3,000 per square meter, of course, there are hundreds of yuan cheaper, but the wood is more ordinary, pine, poplar, elm, these common affordable wood solid wood cabinet doors are cheaper.

Commonly used cabinet doors are the above ones, if you choose economical, with flat doors, blister doors ** is cheaper, appropriate with glass doors can also be. If you pursue texture and grade, solid wood doors are relatively good. General classical style, rustic style uses solid wood cabinet doors to compare the effect, and the decoration feels good.

If it is like Nordic, modern, ordinary decoration can use blister doors and swing doors.

In terms of durability, wardrobe doors are not easy to break, any of the above can be, but paint doors and white doors are prone to yellowing and discoloration under long-term sunlight conditions. In terms of moisture resistance, it is better to seal the surface of the swing door and blister door, and it is also possible to paint it.

In terms of material, MDF particle board is economical, but it is easy to be deformed and damaged by moisture; Multi-layer boards and blockboards feel strong and have a low deformation coefficient, but they are less used as cabinet doors; The solid wood door is ** high, and the decorative effect is good. In terms of environmental protection, as long as it meets the national formaldehyde release standards for indoor boards, it is usually better to have solid wood doors, followed by multi-layer boards, woodworking boards, and finally MDF and particle boards.

I think it's better to choose swing doors; Solid wood particle boardSolid wood particle board, relative air permeability and moisture resistance is better, if the home is more humid, you can choose glass doors or titanium alloy doors, you can also choose artificial boards, but the formaldehyde of these boards is relatively high, which has an impact on human health.

You can choose solid wood material, solid wood material is better-looking, and it is also more environmentally friendly, with natural wood grain, which looks very advanced.

I think it's better to choose a sliding one, you can choose solid wood, you can choose glass, they are all stronger.

Ecological boards, MDF, particle boards, and multi-layer solid wood boards for wardrobe doors are better and environmentally friendly.

1. Ecological board

This kind of board is also called melamine board, and there is no painting step on its surface, which reduces the emission of toxic cavities, so it is more environmentally friendly.

2. MDF.

It is mainly composed of wood fibers and plant fibers and other materials, which are pressed and molded at high temperatures, and the production cost will be relatively low, so the cabinet door of this material will not be expensive.

3. Particle board

It is mainly made of materials such as wood chips, which has certain advantages in nail holding power, strong stability, and is an economical board.

4. Multi-layer solid wood board

It is made of three or more layers of solid wood sheets, which will be relatively stable in terms of structure, not only strong, but also not easy to deform when used.

How to choose the material of the cabinet door

1. The thickness of the wardrobe door

For wardrobe doors made of plates, you need to pay attention to the thickness when purchasing, which is generally between 10mm and 12mm, so as to have the corresponding durability. For wardrobe doors made of glass, you need to check whether there is a scratch-resistant protective film on the back.

2. a panel

The panel of the wardrobe door is also something that needs to be paid attention to in the purchase, and Wu Jinger, this panel is divided into substrate and surface material. For the substrate, MDF and solid wood particle board are basically used on the market, and the stability of the two will be better than that of solid wood particle board, while the nail holding force of MDF is relatively poor, and it is easy to loosen after a long time.

3. Environmental protection and safety

The environmental protection of the board also needs to be paid attention to, and the production of solid wood board can be said to be the most environmentally friendly, and it is durable and durable. This kind of cabinet door also has a natural texture, but the market is relatively high.